Jual HMI Weintek MT1812X

 Panel Computer with 12.1" SVGA TFT Display Introduction

 MT8000 series is the new HMI generation of Weintek. With the design concept of meeting customers satisfaction while easy-to-Use attribute as before, a MT8000 not only performs as a Human Machine Interface but also plays as a role of data exchange center. Through the most popular Ethernet connection, data can be shared among MT8000s without limitation and any SCADA/HMI software on the PC can simply access data from MT8000s.MT8000 series is the best choice for your requirement tomorrow. 

Hardware Specification 12.1" TFT 400 cd/m

2 65,536 colors 500:1 800 x 600 CCFLx2 50,000 hr. min. 4 wires resistive type Active Area Length(X)±2%, Width(Y)±2% 4H COM1 (RS-232/RS-485 2W/4W), COM2(RS232), COM3(RS-232/RS-485 2W),1 Ethernet port (10/100 Base-T) 2 USB 2.0 Full Speed Host port 1 x Audio Line Out, 1 x MIC In AMD Geode LX800/500MHz core processor 256MB D.O.M 256MB on board DDR-400MHz SDRAM Support SDHC/SD Built-in (CR2032 3V lithium battery.) General Specification 24±20% VDC (Power Isolator Inside.) 1.25 A@24VDC Complies with EN50081-2 and EN50082-2 standards Complies with FCC Class A 500VAC (1 min.) Exceed 50M at 500VDC 10 to 25 Hz (X,Y,Z direction 2G 30minutes) 

IP65 front panel (O ring seal) 0~45°C 10-90% RH (non condense) Plastic 322 x 243 x 51mm 305 x 231 mm Approx. 2.1 kg Operating System EB8000 V1.3.0 or Newer

Barang Ready Stock, Untuk Informasi harga:

Contak Person : 
AUTOMATION JAYA
WEB: www.automation-jaya.com
Email : automation.jaya@ gmail.com
Nomer Telpon: 021-91598769
Nomer HP: 081212269831