International Standards
- The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
- Contact your OMRON representative for further details and applicable conditions for these standards.
Basic Model
Renewal-type
E[][]S-type CP1E CPU Units (Built-in USB port)
Product name | Specifications | Ex- ternal power supply (24 VDC) (A) | Current consump- tion (A) | Model | Stand- ards | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Power Supply | In- puts | Out- puts | Out- put type | Pro- gram ca- pacity | Data memory capacity | 5 V | 24 V | ||||
E[][]S-type CPU Units with 14 I/O Points | 100 to 240 VAC | 8 | 6 | Relay | 2K steps | 2K words | -- | 0.16 | 0.07 | CP1E-E14SDR-A | CE |
E[][]S-type CPU Units with 20 I/O Points | 100 to 240 VAC | 12 | 8 | Relay | 2K steps | 2K words | -- | 0.17 | 0.08 | CP1E-E20SDR-A | CE |
E[][]S-type CPU Units with 30 I/O Points | 100 to 240 VAC | 18 | 12 | Relay | 2K steps | 2K words | 0.3 | 0.17 | 0.07 | CP1E-E30SDR-A | CE |
E[][]S-type CPU Units with 40 I/O Points | 100 to 240 VAC | 24 | 16 | Relay | 2K steps | 2K words | 0.3 | 0.17 | 0.09 | CP1E-E40SDR-A | CE |
E[][]S-type CPU Units with 60 I/O Points | 100 to 240 VAC | 36 | 24 | Relay | 2K steps | 2K words | 0.3 | 0.17 | 0.13 | CP1E-E60SDR-A | CE |
Normal-type
E[][]-type CP1E CPU Units (Built-in USB port)
Product name | Specifications | Ex- ternal power supply (24 VDC) (A) | Current consump- tion (A) | Model | Stand- ards | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Power Supply | In- puts | Out- puts | Output type | Pro- gram ca- pacity | Data mem- ory ca- pacity | 5 V | 24 V | ||||
E[][]-type CPU Units with 10 I/O Points | 100 to 240 VAC | 6 | 4 | Relay | 2K steps | 2K words | --- | 0.08 | 0.04 | CP1E-E10DR-A | UC1, N, L, CE |
Transistor (sinking) | --- | 0.11 | --- | CP1E-E10DT-A | |||||||
Transistor (sourcing) | --- | 0.11 | --- | CP1E-E10DT1-A | |||||||
24 VDC | Relay | --- | 0.08 | 0.04 | CP1E-E10DR-D | ||||||
Transistor (sinking) | --- | 0.11 | --- | CP1E-E10DT-D | |||||||
Transistor (sourcing) | --- | 0.11 | --- | CP1E-E10DT1-D | |||||||
E[][]-type CPU Units with 14 I/O Points | 100 to 240 VAC | 8 | 6 | Relay | 2K steps | 2K words | --- | 0.16 | 0.07 | CP1E-E14DR-A | UC1, N, L, CE |
E[][]-type CPU Units with 20 I/O Points | 100 to 240 VAC | 12 | 8 | Relay | 2K steps | 2K words | --- | 0.17 | 0.08 | CP1E-E20DR-A | UC1, N, L, CE |
E[][]-type CPU Units with 30 I/O Points | 100 to 240 VAC | 18 | 12 | Relay | 2K steps | 2K words | 0.3 | 0.17 | 0.07 | CP1E-E30DR-A | UC1, N, L, CE |
E[][]-type CPU Units with 40 I/O Points | 100 to 240 VAC | 24 | 16 | Relay | 2K steps | 2K words | 0.3 | 0.17 | 0.09 | CP1E-E40DR-A | UC1, N, L, CE |
Application Model
Renewal-type
N[][]S1-type CP1E CPU Units (Built-in RS-232C, RS-485, USB ports)
Product name | Specifications | Ex- ternal power supply (24 VDC) (A) | Current consump- tion (A) | Model | Stand- ards | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Power Supply | In- puts | Out- puts | Output type | Pro- gram ca- pacity | Data mem- ory ca- pacity | 5 V | 24 V | ||||
N[][]S1- type CPU Units with 30 I/O Points | 100 to 240 VAC | 18 | 12 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.07 | CP1E-N30S1DR-A | CE |
DC24V | Transistor (sinking) | -- | 0.27 | 0.02 | CP1E-N30S1DT-D | ||||||
Transistor (sourcing) | -- | 0.27 | 0.02 | CP1E-N30S1DT1-D | |||||||
N[][]S1- type CPU Units with 40 I/O Points | 100 to 240 VAC | 24 | 16 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.09 | CP1E-N40S1DR-A | CE |
DC24V | Transistor (sinking) | -- | 0.31 | 0.02 | CP1E-N40S1DT-D | ||||||
Transistor (sourcing) | -- | 0.31 | 0.02 | CP1E-N40S1DT1-D | |||||||
N[][]S1- type CPU Units with 60 I/O Points | 100 to 240 VAC | 36 | 24 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.13 | CP1E-N60S1DR-A | CE |
DC24V | Transistor (sinking) | -- | 0.31 | 0.02 | CP1E-N60S1DT-D | ||||||
Transistor (sourcing) | -- | 0.31 | 0.02 | CP1E-N60S1DT1-D |
N[][]S-type CP1E CPU Units (Built-in RS-232C, USB ports)
Product name | Specifications | Ex- ternal power supply (24 VDC) (A) | Current consump- tion (A) | Model | Stand- ards | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Power Supply | In- puts | Out- puts | Output type | Pro- gram ca- pacity | Data mem- ory ca- pacity | 5 V | 24 V | ||||
N[][]S- type CPU Units with 30 I/O Points | 100 to 240 VAC | 18 | 12 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.07 | CP1E-N30SDR-A | CE |
DC24V | Transistor (sinking) | -- | 0.27 | 0.02 | CP1E-N30SDT-D | ||||||
Transistor (sourcing) | -- | 0.27 | 0.02 | CP1E-N30SDT1-D | |||||||
N[][]S- type CPU Units with 40 I/O Points | 100 to 240 VAC | 24 | 16 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.09 | CP1E-N40SDR-A | CE |
DC24V | Transistor (sinking) | -- | 0.31 | 0.02 | CP1E-N40SDT-D | ||||||
Transistor (sourcing) | -- | 0.31 | 0.02 | CP1E-N40SDT1-D | |||||||
N[][]S- type CPU Units with 60 I/O Points | 100 to 240 VAC | 36 | 24 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.13 | CP1E-N60SDR-A | CE |
DC24V | Transistor (sinking) | -- | 0.31 | 0.02 | CP1E-N60SDT-D | ||||||
Transistor (sourcing) | -- | 0.31 | 0.02 | CP1E-N60SDT1-D |
Normal-type
N/NA[][]-type CP1E CPU Units (Built-in RS-232C, USB ports)
Product name | Specifications | Ex- ternal power supply (24 VDC) (A) | Current consump- tion (A) | Model | Stand- ards | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pow- er Sup- ply | In- puts | Out- puts | Output type | Pro- gram ca- pacity | Data mem- ory ca- pacity | 5 V | 24 V | ||||
N[][]-type CPU Units with 14 I/O Points | 100 to 240 VAC | 8 | 6 | Relay | 8K steps | 8K words | --- | 0.17 | 0.07 | CP1E-N14DR-A | UC1, N, L, CE |
Transistor (sinking) | --- | 0.22 | 0.02 | CP1E-N14DT-A | |||||||
Transistor (sourcing) | --- | 0.22 | 0.02 | CP1E-N14DT1-A | |||||||
24 VDC | Relay | --- | 0.17 | 0.07 | CP1E-N14DR-D | ||||||
Transistor (sinking) | --- | 0.22 | 0.02 | CP1E-N14DT-D | |||||||
Transistor (sourcing) | --- | 0.22 | 0.02 | CP1E-N14DT1-D | |||||||
N[][]-type CPU Units with 20 I/O Points | 100 to 240 VAC | 12 | 8 | Relay | 8K steps | 8K words | --- | 0.18 | 0.08 | CP1E-N20DR-A | UC1, N, L, CE |
Transistor (sinking) | --- | 0.23 | 0.02 | CP1E-N20DT-A | |||||||
Transistor (sourcing) | --- | 0.23 | 0.02 | CP1E-N20DT1-A | |||||||
24 VDC | Relay | --- | 0.18 | 0.08 | CP1E-N20DR-D | ||||||
Transistor (sinking) | --- | 0.23 | 0.02 | CP1E-N20DT-D | |||||||
Transistor (sourcing) | --- | 0.23 | 0.02 | CP1E-N20DT1-D | |||||||
N[][]-type CPU Units with 30 I/O Points | 100 to 240 VAC | 18 | 12 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.07 | CP1E-N30DR-A | UC1, N, L, CE |
Transistor (sinking) | 0.3 | 0.27 | 0.02 | CP1E-N30DT-A | |||||||
Transistor (sourcing) | 0.3 | 0.27 | 0.02 | CP1E-N30DT1-A | |||||||
24 VDC | Relay | --- | 0.21 | 0.07 | CP1E-N30DR-D | ||||||
Transistor (sinking) | --- | 0.27 | 0.02 | CP1E-N30DT-D | |||||||
Transistor (sourcing) | --- | 0.27 | 0.02 | CP1E-N30DT1-D | |||||||
N[][]-type CPU Units with 40 I/O Points | 100 to 240 VAC | 24 | 16 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.09 | CP1E-N40DR-A | UC1, N, L, CE |
Transistor (sinking) | 0.3 | 0.31 | 0.02 | CP1E-N40DT-A | |||||||
Transistor (sourcing) | 0.3 | 0.31 | 0.02 | CP1E-N40DT1-A | |||||||
24 VDC | Relay | --- | 0.21 | 0.09 | CP1E-N40DR-D | ||||||
Transistor (sinking) | --- | 0.31 | 0.02 | CP1E-N40DT-D | |||||||
Transistor (sourcing) | --- | 0.31 | 0.02 | CP1E-N40DT1-D | |||||||
N[][]-type CPU Units with 60 I/O Points | 100 to 240 VAC | 36 | 24 | Relay | 8K steps | 8K words | 0.3 | 0.21 | 0.13 | CP1E-N60DR-A | UC1, N, L, CE |
Transistor (sinking) | 0.3 | 0.31 | 0.02 | CP1E-N60DT-A | |||||||
Transistor (sourcing) | 0.3 | 0.31 | 0.02 | CP1E-N60DT1-A | |||||||
24 VDC | Relay | --- | 0.21 | 0.13 | CP1E-N60DR-D | ||||||
Transistor (sinking) | --- | 0.31 | 0.02 | CP1E-N60DT-D | |||||||
Transistor (sourcing) | --- | 0.31 | 0.02 | CP1E-N60DT1-D | |||||||
NA-type CPU Units with 20 I/O Points (Built-in analog) | 100 to 240 VAC | 12 (Built- in ana- log in- puts: 2) | 8 (Built- in ana- log out- puts: 1) | Relay | 8K steps | 8K words | 0.3 | 0.18 | 0.11 | CP1E-NA20DR-A | UC1, N, L, CE |
24 VDC | Transistor (sinking) | --- | 0.23 | 0.09 | CP1E-NA20DT-D | ||||||
Transistor (sourcing) | --- | 0.23 | 0.09 | CP1E-NA20DT1-D |
Optional Products
Battery Set
Product name | Specifications | Model | Stand- ards |
---|---|---|---|
Battery Set | For N/NA[][](S[])-type CP1E CPU Units Note: Mount a Battery to an N/NA[][](S[])-type CPU Unit if the data in the following areas must be backed up for power interruptions. DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C), Counter Present Values (C), Auxiliary Area (A), and Clock Function (Use batteries within two years of manufacture.) | CP1W-BAT01 | -- |
Option Board (for CP1E N30/40/60 or NA20 CPU Units)
The Options cannot be used for CP1E N14/20, N30/40/60S(1), E10/14/20/30/40/60(S) CPU Units.
Product name | Specifications | Model | Stand- ards | |
---|---|---|---|---|
RS-232C Option Board | One RS-232C Option Board can be mounted to the Option Board slot. One RS-232C connector is included. | CP1W-CIF01 | UC1, N, L, CE | |
RS-422A/485 Option Board | One RS-422A/485 Option Board can be mounted to the Option Board slot. | CP1W-CIF11 | ||
RS-422A/485 Isolated-type Option Board | CP1W-CIF12 | |||
Ethernet Option Board | One Ethernet Option Board can be mounted to the Option Board slot. CP1E CPU Units are supported by CP1W-CIF41 version 2.0 or higher. When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required. | CP1W-CIF41 | ||
Analog Input Option Board | Can be mounted in CPU Unit Option Board slot. 2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA (Resolution:1/2000). | CP1W-ADB21 * | ||
Analog Output Option Board | Can be mounted in CPU Unit Option Board slot. 2 analog outputs. 0-10V (Resolution:1/4000). | CP1W-DAB21V * | ||
Analog I/O Option Board | Can be mounted in CPU Unit Option Board slot. 2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA (Resolution:1/2000). 2 analog outputs. 0-10V (Resolution:1/4000). | CP1W-MAB221 * |
Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-
DAM01), or Memory Card (CP1W-ME05M) with a CP1E CPU Unit.
* Support is provided with CP1E CPU Unit version 1.2 and later.
DAM01), or Memory Card (CP1W-ME05M) with a CP1E CPU Unit.
* Support is provided with CP1E CPU Unit version 1.2 and later.
Expansion I/O Units and Expansion Units (for CP1E E30/40/60(S), N30/40/60(S[]), or NA20 CPU Units)
CP1E E10/14/20(S) or N14/20 CPU Units do not support Expansion I/O Units and Expansion Units.
Unit type | Product name | Specifications | Current consump- tion (A) | Model | Stand- ards | ||||
---|---|---|---|---|---|---|---|---|---|
In- puts | Out- puts | Output type | 5 V | 24 V | |||||
CP1W Expan- sion I/O Units | Input Unit | 8 | --- | 24 VDC Input | 0.018 | -- | CP1W-8ED | U, C, N, L, CE | |
Output Units | --- | 8 | Relay | 0.026 | 0.044 | CP1W-8ER | |||
Transistor (sinking) | 0.075 | -- | CP1W-8ET | ||||||
Transistor (sourcing) | 0.075 | -- | CP1W-8ET1 | ||||||
Output Units | --- | 16 | Relay | 0.042 | 0.090 | CP1W-16ER | N, L, CE | ||
Transistor (sinking) | 0.076 | -- | CP1W-16ET | ||||||
Transistor (sourcing) | 0.076 | -- | CP1W-16ET1 | ||||||
Output Units | --- | 32 | Relay | 0.049 | 0.131 | CP1W-32ER | N, L, CE | ||
Transistor (sinking) | 0.113 | -- | CP1W-32ET | ||||||
Transistor (sourcing) | 0.113 | -- | CP1W-32ET1 | ||||||
I/O Units | 12 | 8 | Relay | 0.103 | 0.044 | CP1W-20EDR1 | U, C, N, L, CE | ||
Transistor (sinking) | 0.130 | -- | CP1W-20EDT | ||||||
Transistor (sourcing) | 0.130 | -- | CP1W-20EDT1 | ||||||
I/O Units | 24 | 16 | Relay | 0.080 | 0.090 | CP1W-40EDR | N, L, CE | ||
Transistor (sinking) | 0.160 | -- | CP1W-40EDT | ||||||
Transistor (sourcing) | 0.160 | -- | CP1W-40EDT1 | ||||||
CP1W Expan- sion Units | Analog Input Unit | 4CH | -- | Input range: 0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA. | Resolution: 1/6000 | 0.100 | 0.090 | CP1W-AD041 | UC1, N, L, CE |
Resolution: 1/12000 | 0.100 | 0.050 | CP1W-AD042 | UC1, N, CE | |||||
Analog Output Unit | -- | 2CH | Output range: 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA. | Resolution: 1/6000 | 0.040 | 0.095 | CP1W-DA021 | UC1, N, L, CE | |
-- | 4CH | Resolution: 1/6000 | 0.080 | 0.124 | CP1W-DA041 | ||||
Resolution: 1/12000 | 0.070 | 0.160 | CP1W-DA042 | UC1, N, CE | |||||
Analog I/O Unit | 4CH | 4CH | Input range: 0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA. Output range: 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to 20 mA. | Resolution: 1/12000 | 0.120 | 0.170 | CP1W-MAD44 | UC1, N, CE | |
4CH | 2CH | Resolution: 1/12000 | 0.120 | 0.120 | CP1W-MAD42 | ||||
2CH | 1CH | Resolution: 1/6000 | 0.083 | 0.110 | CP1W-MAD11 | UC1, N, L, CE | |||
Temperature Sensor Unit | 2CH | -- | Sensor type: Thermocouple (J or K) | 0.040 | 0.059 | CP1W-TS001 | UC1, N, L, CE | ||
4CH | -- | Sensor type: Thermocouple (J or K) | 0.040 | 0.059 | CP1W-TS002 | ||||
2CH | -- | Sensor type: Platinum resistance thermometer (Pt100 or JPt100) | 0.054 | 0.073 | CP1W-TS101 | ||||
4CH | -- | Sensor type: Platinum resistance thermometer (Pt100 or JPt100) | 0.054 | 0.073 | CP1W-TS102 | ||||
4CH | -- | Sensor type: Thermocouple (J or K) 2channels can be used as analog input. Input range: 1 to 5 V, 0 to 10 V, 4-20 mA | Resolution: 1/12000 | 0.070 | 0.030 | CP1W-TS003 | UC1, N, CE | ||
12CH | -- | Sensor type: Thermocouple (J or K) | 0.080 | 0.050 | CP1W-TS004 | ||||
CompoBus/S I/O Link Unit | 8 | 8 | CompoBus/S slave | 0.029 | -- | CP1W-SRT21 | UC1, N, L, CE |
I/O Connecting Cable
Product name | Specifications | Model | Standards |
---|---|---|---|
I/O Connecting Cable | 80 cm (for CP1W Expansion I/O Units and Expansion Units) Only one I/O Connecting Cable can be used in each PLC. | CP1W-CN811 | UC1, N, L, CE |
Note: An I/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion I/O Units and
Expansion Units.
Expansion Units.
DIN Track Accessories
Name | Specifications | Model | Standards | |
---|---|---|---|---|
DIN Track | Length: 0.5 m; Height: 7.3 mm | PFP-50N | -- | |
Length: 1 m; Height: 7.3 mm | PFP-100N | |||
Length: 1 m; Height: 16 mm | PFP-100N2 | |||
End Plate | A stopper to secure the Units on the DIN Track. | PFP-M |
Programming Devices
Software
Product name | Specifications | Model | Stand- ards | ||
---|---|---|---|---|---|
Number of licenses | Media | ||||
FA Integrated Tool Package CX-One Lite Ver.4.[] | CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. CX-One Lite runs on the following OS. OS: Windows XP (Service Pack 3 or higher, 32-bit version)/Windows Vista (32-bit/64-bit version)/ Windows 7 (32-bit/64-bit version)/Windows 8 (32- bit/64-bit version)/Windows 8.1 (32-bit/64-bit version) CX-One Lite Ver. 4.[] includes Micro PLC Edition CX-Programmer Ver.9.[]. | 1 license | CD | CXONE-LT01C-V4 | --- |
FA Integrated Tool Package CX-One Package Ver. 4.[] | CX-One is a comprehensive software package that integrates Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS: Windows XP (Service Pack 3 or higher, 32-bit version)/Windows Vista (32-bit/64-bit version)/ Windows 7 (32-bit/64-bit version)/Windows 8 (32- bit/64-bit version)/Windows 8.1 (32-bit/64-bit version) CX-One Ver. 4.[] includes CX-Programmer Ver. 9.[]. | 1 license * | DVD | CXONE-AL01D-V4 | --- |
Note: 1. The E20/30/40(S), N20/N30/N40(S) CPU Units are supported by CX-Programmer version 8.2 or higher.
The E10, E14, N14, N60, and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When
Micro PLC Edition CXProgrammer is used, you need version 9.03 or higher.
The E60S CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-
Programmer is used, you need version 9.42 or higher.
2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
* Multi licenses are available for the CX-One (3, 10, 30 or 50 licenses).
The E10, E14, N14, N60, and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When
Micro PLC Edition CXProgrammer is used, you need version 9.03 or higher.
The E60S CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-
Programmer is used, you need version 9.42 or higher.
2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
* Multi licenses are available for the CX-One (3, 10, 30 or 50 licenses).
The following tables lists the Support Software that can be installed from CX-One
Support Software in CX-One | CX-One Lite Ver.4.[] | CX-One Ver.4.[] | |
---|---|---|---|
Micro PLC Edition CX-Programmer | Ver.9.[] | Yes | No |
CX-Programmer | Ver.9.[] | No | Yes |
CX-Integrator | Ver.2.[] | Yes | Yes |
Switch Box Utility | Ver.1.[] | Yes | Yes |
CX-Protocol | Ver.1.[] | No | Yes |
CX-Simulator | Ver.1.[] | Yes | Yes |
CX-Position | Ver.2.[] | No | Yes |
CX-Motion-NCF | Ver.1.[] | No | Yes |
CX-Motion-MCH | Ver.2.[] | No | Yes |
CX-Motion | Ver.2.[] | No | Yes |
CX-Drive | Ver.1.[] | Yes | Yes |
CX-Process Tool | Ver.5.[] | No | Yes |
Faceplate Auto-Builder for NS | Ver.3.[] | No | Yes |
CX-Designer | Ver.3.[] | Yes | Yes |
NV-Designer | Ver.1.[] | Yes | Yes |
CX-Thermo | Ver.4.[] | Yes | Yes |
CX-ConfiguratorFDT | Ver.1.[] | Yes | Yes |
CX-FLnet | Ver.1.[] | No | Yes |
Network Configurator | Ver.3.[] | Yes | Yes |
CX-Server | Ver.4.[] | Yes | Yes |
CX ONE OMRON
BalasHapusCX ONE OMRON
CLICK SKIP AD