Delta Programmable Logic Controller DVP Series

2nd Generation Standard Type PLC 

DVP-ES2

• Integrated communication functions
• Built-in 1 RS-232 and 2 RS-485 ports
• V2.0 and later version models supports real time clock and file register (5k words)

DVP-ES2 provides 16/20/24/32/40/60 I/O points for a variety of applications.

DVP20EX2 provides 12-bit 4 analog inputs/ 2 analog outputs it offers a complete analog control solution.

Program capacity: 16k steps

Data register       : 10K words 

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

High efficient processing ability: 1K steps of programs can be completed within 1ms

Max. 10kHz pulse control. Specific motion control instruction such as mark/masking and instant frequency changing are available for multi-axes applications

Up to 4 levels of password of password protection secures your source programs and intellectual property.

Built-in High-Speed Counters

1-phase 1 input : Sets 2/6 , Bandwidth 100kHz/10kHz

1-phase 2 inputs : Sets 2, Bandwidth 100kHz, 

2-phase 2 inputs : Sets 1/3, Bandwidth 15kHz/5kHz

New Members of 

DVP-ES2 Series

2nd Generation Standard Type PLC with built-in CANopen interface

DVP32ES2-C

Inheriting the fast execution speed of ES2, DVP32ES2-C boosts the productivity by built-in 1Mbps CANopen interface specialize in noise-immunity and easy wiring.

Fast processing speed             High-speed industrial

                                                network: CANopen

COM3 supports standard CANopen DS301 protocol

Provides versatile communication types: PDO, SDO, 

1Mbps high speed transmission for large data

Maximum PDO tranmission  up to 390 bytes

Maximum PDO receiving up to 390 bytes

Ability to connect with 16 slaves via CANopen

CANopen Builder software is used to construct slave nodes

New Member of DVP-EX2 Series2nd Generation Temperature/Analog I/O PLCDVP30EX2

Integrated controller able to control temperature and analog input

Built-in 16-bit 3 analog inputs / 1 analog output.

With built-in PID auto tuning function, it offers a complete analog control solution.

Provides 3 analog inputs for PT/NI temperature input, precision of 0.1 degree can be readily achieved.

Suitable for the specific industries that require temperature and analog input control such as boiler industries and HVAC.

Built-in Analog I/O in EX2 Model

Analog Input    : Points 3, Resolution 16-bit, Spec -20~20mA or -10~10V

Analog Output : Points 1, Resolution 12-bit, Spec 0~20mA or -10~10V

Built-in temperature control function in DVP30EX2

Sensor                      : PT100/PT1000

Temperature Range : -200C~800C

Value Range            : -2000~8000

Sensor                     : NI100/NI1000

Temperature Range: -100C~180C

Value Range           : -1000~1800

Basic Type PLCDVP-EC3Applicable for sequence control and simple RS-485/MODBUS communication 

Built-in I/O:10/14/16/20/24/30/32/40/60

Program capacity: 4k steps

COM Port: Built-in RS-232 & RS-485 ports

(10/14/30-point models do not supports RS-485), compatible with MODBUS ASCII/RTU Protocol 

Supports 2 points (Y0,Y1) of independent high-speed (max.10kHz) pulse output 

Built-in High Speed Counters

1-phase 1 input : Sets 2/2, Bandwidth 20kHz/10kHz

1-phase 2 input : Sets 1, Bandwidth 20kHz

2-phase 2 input : Sets 1, Bandwidth 4kHz

Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
• Supports max 4.hardware 200kHz high-speed counters 
• Increases many motion control instruction to meet the applications that require high-speed and high-precision positioning control such as labeling machines, packaging machines and printing machines
• Offers linear/ arc interpolation motion control
• Provides up to 16 external interrupt pointers

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out.
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged 
• Up to 4-level password protection protects your source programs and intellectual property

Outstanding Operation Performance

CPU+ASIC dual processors support floating point operations.

The max. execution speed of basic instructions is able to reach 0.24 us

Flexible Function Extension Modules & Cards

The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

PLC-Link

PLC-Link allows the user link up a max. 32 units to the network without having to install extra communication extension modules.

Brand-New High-Speed Extension Modules

The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program.

Built-in 4 Hardware High-Sped Counters

Standard

1-phase 1 input : Sets 8, Bandwidth 10kHz

Hardware high-speed counter

1-phase 1 input : Sets 4, Bandwidth 200kHz

1-phase 1 input : Sets 4, Bandwidth 200kHz

1-phase 2 input : Sets 2/2, Bandwidth 200kHz/20kHz

2-phase 2 input : Sets 2/2, Bandwidth 200kHz/20kHz

Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output
• Supports max. 4 hardware 200kHz high-speed counters
• Increases many motion control instructions to meet the applications that require high-speed and high-precision positioning control such as labeling machines, packaging machines and printing machines
• Offers linear/ arc interpolation motion control
• Provides up to 16 external interrupt pointers.

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
• Up to 4-level password protection protects your source programs and intellectual property 

Supports DVP-S series left-side and right-side modules.

Add new ETHRW instruction for Ethernet communication.

Built-in 4 Hardware High-speed Counters

Standard

1-Phase 1 input  : sets 1, Bandwidth 10kHz

Hardware High-speed counter

1-Phase 1 input  : sets 4, Bandwidth 200kHz

1-Phase 2 input  : sets 2/2, Bandwidth 200kHz/20kHz

2-Phase 2 input  : sets 2/2, Bandwidth 200kHz/20kHz

2nd Generation Analog I/O Slim PLC DVP-SS2

Economic and Compact PLC.Max.480 I/O Points

Program capacity  : 8k steps

Data register: 5k words

Higher execution speed compared to the competition: LD: 0.35us, MOV: 3.4 us 

Built-in RS-232 and RS-485 ports (Master/Slave).

Supports standards MODBUS ASCII/RTU protocol and PLC Link function

Motion Control Functions.

4k sets of 10kHz pulse output

8k sets high-speed counters: 20kHz/4 points, 10kHz/4 points

Built-in High-speed Counters

1-Phase 1 inputs  : Sets 4/4, Bandwidth 20kHz/10kHz

1-Phase 2 inputs  : Sets 2, Bandwidth 20kHz

2-Phase 2 inputs  : Sets 2/2, Bandwidth 10kHz/5kHz

2nd Generation Advanced Slim PLC DVP-SA2

Compact PLC Specializes in motion Control

4 sets of high-speed pulse output: 100kHz/2sets, 10kHz/2sets
8 sets of high-speed pulse input  : 100kHz/2sets, 10kHz/6sets, 1 group of A/B phase 500kHz
Supports 2-axis linear and arc interpolation
Program capacity : 16k steps
Data register        :  10k words
Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us
Built-in 1 RS-232 and 2 RS-485 ports (Master/Slave). Supports standard MODBUS ASCII/RTU protocol and PLC Link function
No.battery required. Maintenance-free

(Real time clock operates for 15 days after power off )

Supports DVP-S series left-side and right-side modules

Built-in High-speed Counters

1-Phase 1 inputs  : Sets 2/6, Bandwidth 100kHz/10kHz

1-Phase 2 inputs  : Sets 2, Bandwidth 100kHz

2-Phase 2 inputs  : Sets 1/3, Bandwidth 50kHz/5kHz

2nd Generation Analog I/O Slim PLC 

DVP-SX2

Compact PLC with incredible Analog Function
4 Analog Inputs, 2 Analog Outputs, High Efficient PID Auto Tuning Performance

Program capacity : 16k steps

Data register        :  10k words

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

Built-in 1 RS-232 and 2 RS-485 ports (Master/Slave). Supports standard MODBUS ASCII/RTU protocol and PLC Link function 

No.battery required. Maintenance-free

(Real time clock operates for 15 days after power off )

Supports DVP-S series left-side and right-side modules

Motion Control Functions.

4k sets of high-speed pulse output  : 100kHz/2sets, 10kHz/2 sets

8k sets high-speed pulse input        : 100kHz/2 points, 10kHz/6 points

Supports 2-axis linear and arc interpolation.

Built-in Analog Input

Points          : 4

Resolution  : 12-bit

Spec            : -20~20mA or -10~10V  4~20mA

Analog Output 

Points         : 2

Resolution  : 12-bit

Spec           :  0~20mA or -10~10V  4~20mA

Network Type Advanced Slim PLCDVP-SE

The most complete network type slim PLC in the industry 

Provides 8 digital inputs and 4 digital outputs

Built-in mini USB, Ethernet, and 2 RS-485 ports

Program capacity: 16k steps

Data register : 12k words 

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

Built-in mini Ethernet supports MODBUS TCP and Ethernet/IP 

IP Filter function is a firewall that offers the first line of defense and provides protection from malware and network threats\

Supports DVP-S series left-side and right-side modules

No battery required. Maintenance-free 

(Real time clock operates for 15 days after power off)

DVP-PM

General Purpose Motion
Controller
DVP10PM00M

• 2/3/4/5/6-axis linear interpolation motion control
• Highly accurate PWM 200kHz output, resolution 0.3%
• 8 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark/Mask function (for bag making)
• Built-in 24 I/O points Max.256 I/O points
• Program capacity: 64k steps Data register: 10k words 
• Higher speed compared to the competition: LD: 0.13 us, MOV: 2.1 us
• Built-in RS-232 and RS-485 ports. Supports MODBUS ASCII/RTU protocol.

Motion Control Functions

• High-speed pulse output: built-in 6 sets of A/B phase pulse outputs
• 6 sets of high-speed counters and hardware digital filter for counting
• Single-axis motion control function (supports 1st speed, 2nd speed, MPG function)
• Electronic gear function

Professional Motion Controllers DVP20PM00D/M

• Compatible with G-Code/M-Code 
• 3-axis linear/ arc/ helical interpolation 
• Supports electronic cam (2048 points) function for flying shear and rotary cut applications
• Not only a motion controller but also an extension module
• Built-in 16 I/O points.Max.512 I/O points
• Program capacity: 64k steps
• Dta register : 10k words
• Built-in RS-232 and RS-485 ports Supports standards MODBUS ASCII/RTU Protocol

Motion Control Functions

• Built-in A/B phase differential signal outputs: 2 sets (DVP20PM00M)/3 sets (DVP20PM00M).Max differential output frequency is 500kHz 
• Support MPG inputs
• Single-axis motion control function (supports 1 speed, 2 speed, MPG function)
• Electronic gear function.