Kontak Kami

KONTAK KAMI : Telpon : 02126071413 Hp/WhatsApp : 081212269831 Perwakilan Jakarta : Gedung LTC Glodok Lantai 1 Blok C30 No.31 Jl.Hayam Wuruk No.127 Jakarta , Indonesia

Kamis, 23 Agustus 2018

PLC FP0R: new standard for compact PLCs



FP0R - with enhanced, advanced functionality and performance

Our customers stand to benefit from the advanced features of the FP0R control units.
  • Ultra high-speed processing enhances productivity
    An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
    • Large programming capacity of 16k or 32k steps 
    • Generous data register of up to 12k or 32k words 
    • Independent comment memory 
    • USB2.0 port provides high-speed program transfer 
    • The new F-type FP0R provides maintenance-free and complete backup of all data without requiring a battery. Industry's first! 
    Highly advanced, built-in positioning functions
    - Jog operation
    - Individual settings for acceleration and deceleration for ramp functions
    - Target speed can be changed by an external signal input during jog operation or trapezoidal control
    - Can read encoder signals of up to 50kHz (pulse frequency measurement)
    - 6-channel high-speed counters and 4-axis pulse outputs can be used simultaneously
    FP0R units provide various kinds of networking communication using a built-in interface or expansion units
    - Ethernet (Modbus TCP/IEC60870)
    - Profibus
    - CC-Link
    - MEWNET-W0
    - C-NET
    - RS232C or RS485 serial communication
FP0R - same ultra compact size as FP0
The FP0R control unit has the same dimensions as the FP0: W25 x H90 x D60mm. You can connect up to 3 FP0 expansion units to the FP0R, yielding up to 128 I/O points at a total width of just 100mm!


FP0R - fully compatible with FP0 units
FP0R control units are the same size and color, and have the same pin assignment and wiring as the FP0 control units. The FP0R can use existing FP0 programs without needing to change them, making replacement as simple as “plug and play”. Of course, the FP0R can use all FP0 expansion units.

Specifications

PLC type C10 series 
(relay output)		C14 series 
(relay output)		C16 series 
(transistor output)		C32 series 
(transistor output)		T32 series 
(transistor output)		F32 series 
(transistor output)
Number of inputs688161616
Number of outputs4 relay6 relay8 NPN/PNP16 NPN/PNP16 NPN/PNP16 NPN/PNP
Output capacity2A2A0.2A0.2A0.2A0.2A
Digital I/Os (max.)106110112128128128
Processing speedUp to 3000 steps: 0.08µs/step (basic instruction)
After 3000 steps: 0.58µs/step (basic instruction) 
Program memory EEPROM (no back-up battery required)
Program capacity 16000 steps 32000 steps
Data register (DT) 12315 words 32765 words
Memory backup (Flash ROM)Backup with F12, P13 instruction for all areas
Auto backup when power is off:
Counter: 16 points
Internal relay: 128 points
Data register: 315 words 		--
Memory backup (RAM)Backup of the entire area by a built-in batteryBackup of the entire area by FRAM without needing a battery
 
Special features
High-speed counter Single-phase: 6 channels (50kHz); 2-phase: 3 channels (15kHz)
Pulse output --4 channels (50kHz), two channels can be controlled individually
PWM output--4 channels (6Hz to 4.8kHz)
RS232C portUp to two serial interfaces
RS485 portThe following types support RS485 communication with the COM port: C10MRS, C14MRS, C16MT, C16MP, C32MT, C32MP, T32MT, T32MP, F32MT, F32MP.
3-pin terminal block. Baud rate: 19200, 115200 bits/s. Transmission distance: 1200m. Communication method: half-duplex.
Clock/calendar function--available--
Other functionsEditing in RUN mode, download in RUN mode (including comments);
8-character password setting, and program upload protection 
Operating voltage24V DC (± 10%)

Control units with relay output

AFP0RC10RS, input 6, relay output 4
AFP0RC10CRS, input 6, relay output 4, with RS232C
AFP0RC10MRS, input 6, relay output 4 , with RS485
AFP0RC14RS, input 8, relay output 6
AFP0RC14CRS, input 8, relay output 6, with RS232C
AFP0RC14MRS, input 8, output 6, with RS485

Control units with transistor output

AFP0RC16T, input 8, NPN output 8
AFP0RC16CT, input 8, NPN output 8, with RS232C
AFP0RC16MT, input 8, NPN output 8, with RS485
AFP0RC16P, input 8, PNP output 8
AFP0RC16CP, input 8, PNP output 8, with RS232C
AFP0RC16MP, input 8, PNPoutput 8, with RS485
AFP0RC32T, input 16, NPN output 16
AFP0RC32CT, input 16, NPN output 16, with RS232C
AFP0RC32MT, input 16, NPN output 16, with RS485
AFP0RC32P, input 16, PNP output 16
AFP0RC32CP, input 16, PNP output 16, with RS232C
AFP0RC32MP, input 16, PNPoutput 16, with RS485

Control units T type

AFP0RT32CT,  input 16, NPN output 16, with RS232C, built-in battery
AFP0RT32MT, input 16, NPN output 16, with RS485, built-in battery
AFP0RT32CP,  input 16, PNP output 16, with RS232C, built-in  battery
AFP0RT32MP, input 16, PNP output 16, with RS485, built-in battery

Control units F type

AFP0RF32CT,  input 16, NPN output 16, with RS232C, battery-less data backup
AFP0RF32MT, input 16, NPN output 16, with RS485, battery-less data backup
AFP0RF32CP,  input 16, PNP output 16, with RS232C, battery-less data backup
AFP0RF32MP, input 16, PNP output 16, with RS485, battery-less data backup

FP0R is fully compatible with all FP0 expansion units

Input only type


  • FP0-E8X, input 8 points 
  • FP0-E16X, input 16 points

Relay output type


  • FP0-E8RS, input 4 points, output 4 points 
  • FP0-E8YRS, output 8 points 
  • FP0-E16RS, input 8 points, output 8 points 
  • FP0-E32RS, input 16 points, output 16 points

Transistor output type


  • FP0-E8YP, output 8 points PNP
  • FP0-E8YT, output 8 points NPN
  • FP0-E16YP, output 16 points PNP
  • FP0-E16YT, output 16 points NPN

Transistor output type

  • FP0-E16P, input 8 points, output 8 points PNP
  • FP0-E16T, input 8 points, output 8 points NPN
  • FP0-E32P, input 16 points, output 16 points PNP
  • FP0-E32T, input 16 points, output 16 points NPN


Analogue units


ProductFP0-A21AFP0RAD4AFP0RAD8AFP0RA21AFP0RA42AFP0RDA4
Input data
Channels24824 
Voltage mode0 to 5V /
-10V to +10V		-10 to +10 V 14 bits
-5 to +5 V 14 bits
0 to +10 V 14 bits
0 to +5 V 14 bits		 
Current mode0 to 20mA0 to 20 mA 14 bits 
Thermocouple modeK, J, T, R types     
Resolution12-bit14-bit 
Conversion speed
for voltage / current
for thermocouple		1ms / channel
560ms		2 ms/all channels 
--		 
Output data 
No. of outputs1 channel  124
Voltage mode-10V to +10V  -10 to +10 V 14 bits
-5 to +5 V 14 bits
0 to +10 V 14 bits
0 to +5 V 14 bits
Current mode0 to 20mA  0 to 20mA 14 bits
4 to 20mA 14 bits
Resolution12-bit  14-bit
Conversion speed500µs / ch.  500µs / ch.
Multiple floating point calculation, accurate PID and auto-tuning can be performed with great efficiency.

RTD input unit

The new module determines temperatures with extreme precision and is easy to use. The temperature data obtained using the RTD (Resistance Temperature Detector) is converted to the digital value to be read by the FP0/FPS control unit. 
  • The module can be easily installed in an existing system. 
  • Multiple RTD types are allowed in one module, yielding a cost-effective solution. 
  • The temperature data measured can be converted to either degrees Celsius or degrees Fahrenheit inside the FP0 RTD unit. 
  • A broken RTD can be detected.

Available RTD types:
Pt100 (to IEC751), Pt1000 (to IEC751), Ni1000 (to DIN43760) 

FP0-RTD6

ProductFP0-RTD6
Input channels6
Input rangePt100: -200°C to +500°C
Pt1000: -200°C to +300°C
Ni1000: -30°C to +150°C
Resistor: 20W to 2200W
Resolution0.1K/°F, 0.01K/°F (selectable via output register) 
Sampling cycle 0.1 or 1s for all channels (selectable via DIP switches) 
Accuracy 
Pt100Cycle 1sAmbient temp.: 25°C 0.3K (-10°C to +30°C 
0.2%/1.4K (-200°C to +500°C) 
Entire temp. range 0.35%/2.5K
Cycle 0.1s Entire temp. range 0.5%/3.5K
Pt1000Cycle 1sAmbient temp.: 25°C0.3K (-10°C to +30°C 
0.2%/1.0K (-200°C to +300°C) 
Entire temp. range 0.35%/1.7K
Cycle 0.1s Entire temp. range 0.5%/2.5K
Ni1000Cycle 1sEntire temp. range 1K
Cycle 0.1sEntire temp. range 2K
ResistorCycle 1sEntire temp. range 1W (20 to 2200W)
Cycle 0.1sEntire temp. range 2W (20 to 2200W)

Thermocouple input units

 
ProductFP0-TC4FP0-TC8
Channels48
Input rangeK, S type thermocouple: -100°C to 500°C
T type thermocouple: -100°C to 400°C
R type thermocouple: 0°C to 1500°C
Resolution0.1°C
Sampling cycle300ms: when using 2 channels for an input point
500ms: when using 4 channels for an input point
700ms: when using 6 channels for an input point
900ms: when using 8 channels for an input point
AccuracyRange for K and J (-100°C to 500°C): 0.8°C
Range for T (-100°C to 400°C): 0.8°C
Range for R (0°C to 99.9°C): 3°C
(100°C to 299.9°C): 2.5°C 
(300°C to 1500°C): 2°C
Input impedanceMore than 1MW
Insulation method
  • Between thermocouple input terminals and control unit internal circuits: photo-coupler insulation/DC-DC insulation 
  • Between thermocouple input terminal channels: PhotoMOS relay insulation 
  • Up to three units can be added to each control unit enabling temperature control of up to 24 channels. 
  • Broken thermocouples can be detected. 

PROFIBUS

The FP0 DSP2 can operate either as a DP slave module or as a remote I/O system to which different decentralized inputs and outputs can be connected. A DIP switch can be used to switch between the two modes:
Mode 1: DP Slave module. Connect the FP0 or FPS CPU + expansion modules to the PROFIBUS network.
Mode 2: remote I/O. Connect up to three expansion modules without CPU to the PROFIBUS network.
In remote I/O mode, the unit can be connected to any PLC from any manufacturer that offers a PROFIBUS communication interface.

MEWNET-F

MEWNET-F is remote I/O system with reduced wiring that connects PLCs and I/O slave stations via 2-core cabling. By adding an I/O link unit to the FP0, you can link a master station PLC and FP0 inputs and outputs via the network.

S-LINK CPU

FP0 connects directly to the S-LINK for reduced wiring and simple installation. It can control up to 128 points for S-LINK-related devices. Similar to other FP0 units, up to three expansion units can be used for efficient I/O wiring.

CC-Link Slave Unit FP0-CCLS

This slave unit was developed for the open standard network CC-Link. By connecting this module to FP0R, FP0 or FP-X, data can be exchanged quickly between Panasonic PLCs and external devices, providing a vendor-independent data communication solution.

Relay output terminal FP0-RT8Y-6A

The FP0-RT8Y-6A unit provides reliable insulation between peripheral equipment and the PLC system, even for electrical loads up to 250VAC/6A. Standardized MIL connectors establish a direct connection to the FP0R or FP0 unit.

The FP-PS24 high-end power supply units - also for arduous application conditions

  • Up to 91.5% efficiency (FP-PS24-060E) 
  • Current limiting and short-circuit protection 
  • High power density with minimal loss 
  • Wide ambient temperature range from -10°C to +70°C, without performance loss 
  • Safety Standards Approved (IEC60950, UL60950,CSA22.2-60950, EN60950) tested by CSA 
  • Protection class II, without grounding 
  • Easy mounting and wiring 
  • Extremely compact with optimal air cooling

Product downloads

CAD

DescriptionRelease dateFile sizeLanguage
FP0R analog unit, 3D Data983 KB
FP0R control unit with relay output, 3D Data1.81 MB
FP0R control unit with transistor output, 3D Data1.46 MB
FP0R expansion unit, 3D Data5.86 MB
FP0R input only type, 3D Data420 KB
FP0R relay output type, 3D Data552 KB
FP0R transistor output type, 3D Data1.48 MB

Cable drawings

DescriptionRelease dateFile sizeLanguage
Communication cable between GT terminals and FP Series Tool port, 2m2007-05-0136 KBEnglish
Connection cable Minas A4/A5/A6 servo driver to FP-Sigma/FP0R, NPN, 1 axis, DVOP0989W12012-01-25158 KB
Connection cable Minas A4/A5/A6 servo driver to FP-Sigma/FP0R, PNP, 1 axis, DVOP0988W12011-05-05160 KBEnglish
Connection cable MINAS LIQI to FP-Sigma/FP0R PNP, 1 axis, 26-pin <-> 2x10-pin MIL connector (for I/O), 2m, DV0P0800T012013-07-0395 KBEnglish
FP Modem-56k RS232C Cable for FP Series PLC COM Port with 9-pin Sub-D connector, 0.5m, CABMODPLC2112005-06-2756 KBEnglish
FP Modem-56k RS232C cable for FP Series PLC COM port with screw terminal, 0.5m, CABMOD111D2007-03-2262 KBEnglish
Programming cable for FP and GT series (MINI-DIN to 9 PIN SUB-D), 3m, AFC85132007-03-1935 KBEnglish

Data sheets

DescriptionRelease dateFile sizeLanguage
Cablaggio collegamenti porta COM per GT022017-10-1236 KBEnglish
Data sheet AFPC10PINS, screw teminal for 8 PLC outputs2018-06-04368 KBEnglish
Data sheet AFPRT8, Relay terminal with 8 relays (2A), with LED, changeover contact2018-06-04260 KBEnglish
Data sheet FP0R2.2 MBEnglish
Data sheet MF20MD, Connector screw terminal 20 pins2018-06-04323 KBEnglish

Flyers

DescriptionRelease dateFile sizeLanguage
Panasonic & EPLAN: A strong cooperation for global engineering795 KBEnglish
PLC/HMI Starter Kit (FP0R)2015-06-24366 KBEnglish

Libraries

DescriptionRelease dateFile sizeLanguage
Motion - & Communication Library for MINAS A6 Series, Modbus RTU, Version 2.0.4.0, Included Demo Program. Supported PLCs: FP0R, FP-Sigma, FPX, FP7, FP0H2017-12-123.96 MBEnglish
Motion Control Library for MINAS LIQI / A5 / A6 Series, Pulse Output Control with compact PLCs, Version 1.0, Included Demo Program. Supported PLCs: FP0R, FP-Sigma, FPX, FP72017-12-121.26 MBEnglish

Manuals

DescriptionRelease dateFile sizeLanguage
FP Series Programming Manual2011-08-018.7 MBEnglish
FP0 / FP-Sigma CC Slave Link Unit Technical Manual, ARCT1F380E42013-07-01700 KBEnglish
FP0 A/D Converter Unit Technical Manual2006-12-01404 KBEnglish
FP0 D/A Converter Unit Technical Manual, ARCT1F382E42013-07-011019 KBEnglish
FP0 RTD Unit Technical Manual2008-12-01820 KBEnglish
FP0 Thermocouple Unit Technical Manual, ARCT1G366E42013-07-011.39 MBEnglish
FP0-A21 Analog I/O Unit Technical Manual, ARCT1F390E32013-07-01501 KBEnglish
FP0-DP Slave Unit Hardware2009-10-01562 KBEnglish
FP0R Analog I/O Unit User's Manual (FPWIN GR), WUME-FP0RAIO-022015-11-012.28 MBEnglish
FP0R User's Manual (European version for Control FPWIN Pro)2012-01-0110.6 MBEnglish
FP0R User's Manual, ACGM0475V3EN2014-11-014.81 MBEnglish

Programming examples

DescriptionRelease dateFile sizeLanguage
FPWIN Pro projects in LD and ST code for positioning operations with a single-speed and a double-speed inverter. (Examples related to FP-X, FP Sigma, and FP0R User's Manuals.)2011-10-01300 KBEnglish

Shortforms

DescriptionRelease dateFile sizeLanguage
Connection technology for Programmable Logic Controllers623 KBEnglish
Short Form Programmable Logic Controllers2016-10-202.47 MBEnglish

Software

DescriptionRelease dateFile sizeLanguage
FP Data7 V.1.60. This Windows software communicates with all PLCs. It’s for a data load, save, edit of the PLC internal memory. Export and import in CSV format is possible too. For Windows 7, 8.x and 10.2018-02-2838.08 MBEnglish
FP Loader Version 2.50: A software tool designed to download program files created with FPWIN GR or FPWIN Pro to a PLC. It supports all FP-Series PLCs without FP7.2011-06-21320 KBEnglish
FPGT Loader (Windows 7/8.x/10), Vers.2.0.1.3, is a utility for up-/downloading data to and from GT panels(GT01, GT02, GT03-E, GT11, GT21, GT05, GT12, GT32) and PLCs(FP0, FP0R, FP7, FP2, FP2SH, FP-Sigma, FP-X, FP-e). FPGT Loader can be used to make true copies of a master GT or a master PLC project to one or more target GTs or PLCs.2018-04-1863.15 MBEnglish
Software tool used for switching FP0R PLC types from FP0R mode into FP0 mode. After that FP0R PLC can be programmed with software tools supporting FP0.2013-07-1733.62 MBEnglish

Technical information

DescriptionRelease dateFile sizeLanguage
072 Industry 4.0 with OPC UA over the operator panel series HM2018-01-28113 KBEnglish
Diposting oleh di

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)