Kontak Kami

KONTAK KAMI : Telpon : 02126071413 Hp/WhatsApp : 081212269831 Perwakilan Jakarta : Gedung LTC Glodok Lantai 1 Blok C30 No.31 Jl.Hayam Wuruk No.127 Jakarta , Indonesia

Selasa, 23 Oktober 2018

HMI OMRON NS15-TX01B-V2




International Standards

  • The standards are availabled as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
  • Contact your OMRON representative for further details and applicable conditions for these standards.

Programmable Terminals

Product 
name
SpecificationsModelStandards
Effective display 
area
Number 
of dots
EthernetCase color
NS5-V2 *15.7-inch *2 
TFT color 
LED backlight
320 × 
240 dots
NoIvoryNS5-SQ10-V2UC1, CE, N, 
L, UL Type4
BlackNS5-SQ10B-V2
YesIvoryNS5-SQ11-V2
BlackNS5-SQ11B-V2
5.7-inch *2 
High-luminance 
TFT color 
LED backlight
NoIvoryNS5-TQ10-V2
BlackNS5-TQ10B-V2
YesIvoryNS5-TQ11-V2
BlackNS5-TQ11B-V2
NS8-V28.4-inch *2 
TFT 
LED backlight
640 × 
480 dots
NoIvoryNS8-TV00-V2UC1, CE, N, 
L
BlackNS8-TV00B-V2
YesIvoryNS8-TV01-V2
BlackNS8-TV01B-V2
NS10-V210.4-inch *2 
TFT 
LED backlight
640 × 
480 dots
NoIvoryNS10-TV00-V2UC1, CE, N, 
L, UL Type4
BlackNS10-TV00B-V2
YesIvoryNS10-TV01-V2
BlackNS10-TV01B-V2
NS12-V212.1-inch *2 
TFT 
LED backlight
800 × 
600 dots
NoIvoryNS12-TS00-V2
BlackNS12-TS00B-V2
YesIvoryNS12-TS01-V2
BlackNS12-TS01B-V2
NS15-V215-inch 
TFT
1,024 × 
768 dots
YesSilverNS15-TX01S-V2
BlackNS15-TX01B-V2
NSH5-V2 *1 
Hand-held
5.7-inch 
TFT
320 × 
240 dots
NoBlack (Emergency 
stop button: Red)
NSH5-SQR10B-V2UC, CE
Black 
(Stop button: Gray)
NSH5-SQG10B-V2
*1. As of July 2008, the image memory has been increased to 60 MB. 
*2. Lot No. 15Z0 or later of NS5 color-type models, Lot No. 28X1 or later of NS8 models, Lot No. 11Y1 or later of NS10 
       models, Lot No. 14Z1 or later of NS12 models, Lot No. 31114K or later of NS15 models.

NS-Runtime

Product nameSpecificationsMediaModelStandards
NS-RuntimeNS-Runtime Installer, PDF manual, hardware key *1 licenseCDNS-NSRCL1---
3 licensesNS-NSRCL3
10 licensesNS-NSRCL10
Note: A hardware key (USB dongle) is required for NS-Runtime operation.

System Requirements

ItemSpecifications
OS *Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version)
CPUCeleron, 1.3 GHz or higher (Recommended)
Memory sizeHDD: 50 MB min., RAM: 512 MB min. (Windows 7: 1 GB min.). 
50 MB is required for the Runtime alone. (An additional 280 MB is required if CX-Server is not already 
installed.)
* Ver. 1.30 or later of NS Runtime do not support Windows XP (Service Pack 3 or higher) and Windows Vista.

Software

How to Select Required Support Software for Your Controller

The required Support Software depends on the Controller to connect. Please check the following table when purchasing the Support Software.
ItemOmron PLC SystemOmron Machine Automation Controller System
ControllerCS, CJ, CP, and other seriesNJ-series and NX-series
Programmable TerminalsNS-seriesNS-series with an Ethernet port
SoftwareFA Integrated Tool Package CX-OneAutomation Software Sysmac Studio

FA Integrated Tool Package CX-One

Product 
name
SpecificationsModelStand- 
ards
Number of 
licenses
Media
FA Integrated 
Tool Package 
CX-One 
Ver.4.[]
The CX-One is a comprehensive software 
package that integrates Support Software 
for OMRON PLCs and components. 

CX-One runs on the following OS. 
Windows XP (Service Pack 3 or higher, 
32-bit version)/ 
Windows Vista (32-bit/64-bit version)/ 
Windows 7 (32-bit/64-bit version)/ 
Windows 8 (32-bit/64-bit version)/ 
Windows 8.1 (32-bit/64-bit version)/ 
Windows 10 (32-bit/64-bit version) 

CX-One Version 4.[] includes CX-Designer 
Ver.3.[]. 
For details, refer to the CX-One catalog 
(Cat. No. R134)
1 license 
*
DVDCXONE-AL01D-V4---
* Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
Product 
name
SpecificationsModelStand- 
ards
Number of 
licenses
Media
Sysmac 
Studio 
Standard
Edition 
Ver.1.[]
The Sysmac Studio provides an integrated development
environment to set up, program, debug, and maintain 
NJ/NX Series CPU Units, NY-series Industrial PC, 
Controllers and other Machine Automation Controllers, 
as well as EtherCAT slaves. 

Sysmac Studio runs on the following OS. 
Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/ 
64-bit version)/Windows 8.1 (32-bit/64-bit version)/ 
Windows 10 (32-bit/64-bit version) 

The Sysmac Studio Standard Edition DVD includes 
Support Software to set up EtherNet/IP Units, 
DeviceNet slaves, Serial Communications Units, and 
Support Software for creating screens on HMIs (CX- 
Designer). 
Refer to your OMRON website for details.

(Media only)
DVDSYSMAC-SE200D---
1 license 
*
---SYSMAC-SE201L---
Note: To connect the NJ5 Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is 
          also required. 
          To connect the NJ1/NJ3 Controller, NS system version 8.61 or higher is required. CX-Designer version 3.4 or higher 
          is also required. 
          To connect the NX7 Controller, NS system version 8.9 or higher is required. CX-Designer version 3.64 or higher is 
          also required. 
          To connect the NX1 controller, NS system version 8.96 or higher is required. CX-Designer version 3.70 or higher is 
          also required. 
          To connect the NX1P controller, NS system version 8.93 or higher is required. CX-Desiner version 3.70 or higher is 
          also required. 
* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).

Cable

Product nameSpecificationsModelStand- 
ards
Cable 
*1
155_lu_7_1
Screen transfer cable for DOS/V 
(CX-Designer ↔ PT)
Length: 2 mXW2Z-S002---
USB-Serial Conversion CableLength: 0.5 mCS1W-CIF31N
USB relay cableLength: 1 mNS-USBEXT-1M---
NSH5 CablesRS-422A cable (loose wires + D-Sub 9-pin)Length: 10 mNSH5-422CW-10M
RS-232C cable (loose wires + D-Sub 9-pin)Length: 3 mNSH5-232CW-3M
RS-232C cable (loose wires + D-Sub 9-pin)Length: 10 mNSH5-232CW-10M
UL-compliant NSH5 
Cable
RS-422A cable (loose wires)Length: 10 mNSH5-422UL-10MCU
RS-232C cable (loose wires + relay cable)Length: 3 mNSH5-232UL-3M
RS-232C cable (loose wires + relay cable)Length: 10 mNSH5-232UL-10M
PT-to-PLC 
Connecting Cable *2
PT connection: 9 pins 
PLC connection: 9 pins
Length: 2 mXW2Z-200T---
Length: 5 mXW2Z-500T
PT connection: 9 pins 
PLC peripheral port
Length: 2 mXW2Z-200T-2
Length: 5 mXW2Z-500T-2
NSH5 Removable Box 
Cable
RS-232C Cable (connectors)Length: 3 mNSH5-232CN-3M
Length: 10 mNSH5-232CN-10M
NSH5 Removable Box---NSH5-AL001
NSH5 Wall-mounting 
Bracket
---NSH5-ATT02
NSH5 Visor---NSH5-ATT01
*1. Use a standard USB Type A male to Type B type male Cable to connect the NS series PT to a personal computer 
       (CX-Designer). 
       We recommend that you use a USB cable with a ferrite core attached to ensure stable communications. 
       (Examples: FH-VUAB from OMRON and U2C-BF series (US2-BF[][]BK) from ELECOM as of February 2016) 
       Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends 
       on the printer. 
*2. To connect the NS series PT to NJ series Controller, using a commercially available 10/100-BASE-TX twisted-pair 
       cable. 
       For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).

Options

Product nameSpecificationsModelStand- 
ards
Video 
Input 
Unit
155_lu_8_1Inputs: 4 channels 
Signal type: NTSC/PAL
NS-CA001UC1, CE
155_lu_8_2Input channels: 2 video channels and 1 RGB channel *1 
Signal type: NTSC/PAL
NS-CA002
Controller 
Link 
Interface 
Unit
155_lu_8_3For Controller Link CommunicationsNS-CLK21UC1, CE
RS-422A 
Adapter
155_lu_8_4Transmission distance: 500 m total length 
Note: Use this model when connecting PT models without 
a V[] suffix. 
Note: PT models with the V[] suffix can also be connected.
NS-AL002---
155_lu_8_5Transmission distance: 50 m total length 
Note: 
Only PT models with a suffix of V[] are connectable. 
Use the NS-AL002 to connect models without a V[] suffix.
CJ1W-CIF11UC1, N, 
L, CE
Sheet/ 
Cover 
*2
155_lu_8_6Anti-reflection Sheets 
(5 surface sheets)
NS15NS15-KBA04---
NS12/10NS12-KBA04
NS8NS7-KBA04
NS5NT30-KBA04
Protective Covers (5 pack) 
(anti-reflection coating)
NS12/10NS12-KBA05
NS8NS7-KBA05
NS5NT31C-KBA05
Protective Covers (1 cover included) 
(Transparent)
NS15NS15-KBA05N
Protective Covers (5 covers included) 
(Transparent)
NS12/10NS12-KBA05N
NS8NS7-KBA05N
NS5NT31C-KBA05N
AttachmentNT625C/631/631C Series to NS12/10 SeriesNS12-ATT01
NT625C/631/631C Series to NS12/NS10 Series (Black)NS12-ATT01B
NT610C Series to NS12/10 SeriesNS12-ATT02
NT620S/620C/600S Series to NS8 SeriesNS8-ATT01
NT600M/600G/610G/612G Series to NS8 SeriesNS8-ATT02
Memory 
Card
155_lu_8_7128 MBHMC-EF183
256 MBHMC-EF283
512 MBHMC-EF583
Memory Card Adapter---HMC-AP001CE
Replacement BatteryBattery life: 5 years (at 25°C)CJ1W-BAT01---
Bar Code Reader *3CCD handheld bar code reader (RS-232C interface)V520-RH21-6

Tidak ada komentar:

Posting Komentar