MITSUBISHI Q01CPU

Brand: MITSUBISHI 

Name: Basic type CPU

Model: Q01CPU

Program capacity: 8K step.

Input / output points: 1024 points.

Number of input and output elements: 2048.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

CPU module expansion standard RAM (max 8MB).

Can be used with the SD memory card at the same time.

Continuous access file register.

Input: 4 channels.

Platinum resistance (Pt100; JPt100).

No heater disconnection detection function.

Sampling period: 0.5s/4 channel.

18 point terminal station.

Peak current suppression.

Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost MITSUBISHI Q01CPU. 

Heating function at the same time.

The multiple loop can reach the set value at the same time to carry out the uniform temperature control,

Helps to prevent no-load and effective energy saving and reduce operating costs Q01CPU

Automatic adjustment function.

The PID constant can be adjusted automatically in the control process.

Automatic adjustment of cost (time, material and electrical energy) can be reduced MITSUBISHI Q01CPU. 

Can be flexible in various settings, to achieve the best temperature control of the temperature control module.

Equipment for high temperature control stability of extrusion molding machine,

The temperature regulating module has the function of preventing overheating and preventing over cooling.

According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode MITSUBISHI Q01CPU. 

In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected. Input: 4 channels.

Input: DC-10~10V, DC0~20mA MITSUBISHI Basic type CPU. 

Output (resolution): 0~4000, -4000~4000, 0~12000, 0~16000, -16000~16000.

Conversion speed: 500 s/1 channel.

18 point terminal.

The possibility of expanding control with intelligent function MITSUBISHI Basic type CPU. 

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output MITSUBISHI Basic type CPU. 

Hardware and installation costs havee been greatly reduced due to the need for an external isolation amplifier Q01CPU. 

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module. MITSUBISHI Q01CPU. 

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.