MITSUBISHI Q04UDHCPU

Brand: MITSUBISHI 

Name: General purpose CPU

Model: Q04UDHCPU

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 40 K step.

Processing speed: 0.0095 s.

Program memory capacity: 160 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing.

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0.014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula.

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

SRAM memory card; capacity: 8M bytes.

Memory card with protective cover.

Support SD memory card.

High speed universal QCPU support SD memory card,

In order to be able to have a memory card port between SD and PC to easily realize data exchange.

In addition, the SD memory card and the extended SRAM card can be used simultaneously MITSUBISHI Q04UDHCPU. 

Therefore, the extension of the file register using the extended SRAM card,

SD memory card can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation Q04UDHCPU

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording MITSUBISHI Q04UDHCPU. 

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording.

Better user experience data recording function.

Easy to record, no need to program.

Simply through the special configuration tool wizard to easily complete the settings,

The collected data can be saved in CSV format to SD storage card MITSUBISHI Q04UDHCPU. 

Can be effectively used to save the CSV file to facilitate the creation of a variety of reference materials,

Including daily reports, generate reports and general reports.

These data can be applied to the data analysis, tracing, etc MITSUBISHI General purpose CPU. .

To record the change of control data without missing.

Data can be collected in a time interval or in a millisecond time interval,

To record the change of the specified control data without any omission MITSUBISHI General purpose CPU. 

Therefore, in the event of failure, can quickly determine the cause, the precise action analysis.2 channel.

Differential input: 40kpps/400kpps/800kpps/2Mpps/4Mpps/8Mpps.

Count input signal: EIA standard RS-422-A (differential line driver) MITSUBISHI General purpose CPU. 

DC input: 10kpps/100kpps/200kpps.

Count input signal: DC5/12/24V 7 ~ 10mA.

External output: DC24V.

Consistent output: Transistor (drain), DC12/24V, 0.1A/ point, 0.8A/ common.

40 pin connector.

Multifunctional counting / timing module (QD65PD2)

Very precise positioning and tracking.

Maximum count rate of up to 8Mpps (differential input 4 phase 2 frequency multiplication), is 2 times in the past.

Multifunctional and convenient use!

Pulse measuring function... Measurement resolution of 100ns, can be performed with high precision pulse measurement.

PWM output function... Configuration of the maximum 200 PWM kHz output function. Available 0.1 s single

Bit change duty cycle, to achieve ultra precise output contrrol Q04UDHCPU. 

Cam switching function... The output of the 8 points, 16 step / output cam switch.

High precision timing control can be realized by cam switch.

Complete complex control using a consistent test!

Uniform output function... Caan provide support for complex applications MITSUBISHI Q04UDHCPU. 

According to the specific circumstances, choose to use the cam switch function or the same output function.