MITSUBISHI Q172CPUN

Brand: MITSUBISHI 

Name: Motion CPU module

Model: Q172CPUN

Control axis: maximum 8 axes.

Greater flexibility.

PLC control and motion control using independent CPU, optimize the system configuration.

More than 4 CPU modules can be freely selected in multi CPU system.

MITSUBISHI SSCNET control function.

By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.

The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified.

Each 1 CPU can control up to 32 axes at the same time.

Can control the small capacity from 10W to 55KW large capacity servo motor.

Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring.

FL-net (OPCN-2) Ver.2.00 interface.

10BASE2 use.

Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module.

The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet MITSUBISHI Q172CPUN. 

Realize the previous communication method can not achieve the detailed control of data transmission,

Real time data analysis using user applications,

In order to provide support for improving production efficiency and equipment value Q172CPUN 

Optimal network matching for application purposes and applications,

Seamless communication between different hierarchical systems MITSUBISHI Q172CPUN. 

Enhancing the ability of information communication through network.

This is also a major task in the field of automation.

Network environment provided by Q series

Is truly open & seamless.

Including based on universal ethernet,

Achieve easy management of the environment "IE Control CC-Link" controller network,

As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Q172CPUN. 

Also including Japan''s first, to achieve the world standard,

And get the SEMI certification of the field network "CC-Link",

And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Motion CPU module. 

And support sensor networks "AnyWire",

To enrich the lineup flexibility to integrate the various layers of automation network MITSUBISHI Motion CPU module. Input points: 32 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

32 points and 1 common ends.

Common anode.

Output points: 32 points.

Output voltage and current: DC12-24V; 0.1A/ point; 2A/ common.

Response time: 1ms.

1 point 32 public end, leakage type; 40 pin connector MITSUBISHI Motion CPU module. 

With thermal protection.

With short circuit protection.

With the surge absorber.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditioonal 32K word,

And to achieve the extension to the file register to all regions of the file register Q172CPUN. 

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured daata (array),

The speed has been improved MITSUBISHI Q172CPUN. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.