MITSUBISHI Q172DLX

Brand: MITSUBISHI 

Name: Servo external signal interface module

Model: Q172DLX

Input points: servo external signal 32 points, 8 axis.

Input mode: source / drain type.

Input and output points: 32 points.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

GI-50/125 optical cable.

Double ring.

Remote I/O net (remote master station).

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station MITSUBISHI Q172DLX. 

Optical fiber loop system. Q172DLX.... High speed communication of 10Mbps/25Mbps is realized.

The distance between stations, the length of the total cable length, strong anti-interference.

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI Q172DLX. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.PCI bus /PCI-X bus.

Support Japanese, English OS.

Multimode fiber optic cable.

Dual loop controller network (control station / common station).

DB A20 AnyWire system uses a separate transmission mode,

Sensor networks to achieve high speed and high reliability MITSUBISHI Q172DLX. 

The transmission distance of 50m/200m/1km/3km can be selected.

1 modules can be up to 512 points of the input, 512 points of output (standard setting).

Even branch wiring, but also to detect transmission lines.

Province distribution network module in cabinet and device.

Link to connect the 64 stations when the fastest scanning time for 1 MITSUBISHI Servo external signal interface module. 2ms (rate 2.5Mbps).

According to the transmission distance, the transmission rate is selected from 2 MITSUBISHI Servo external signal interface module. 5Mbps, 625kbps and 156kbps.

CC-Link/LT from the station does not need any parameter settings.

Only need to set up the transmission speed in the master module, you can use the remote I/O.

I/O control in the first class of open field network module.

CC-Link based on reliable field bus technology,

Able to transmit large number of bits data (such as ON/OFF information) and word data (such as analog information) MITSUBISHI Servo external signal interface module Q172DLX.  

Consistency of CC-Link to maintain loop transmission,

And the cycle of transmission and information (instantaneous transmmission) communication separately, so as to ensure the timeliness of MITSUBISHI Q172DLX. 

Even if the information reaches saturation, it will not affect the link scan time.