MITSUBISHI Q172HCPU

Brand: MITSUBISHI 

Name: Motion CPU module

Model: Q172HCPU

Control axis: maximum 8 axes.

Teaching operation function: No.

To stop the speed control function at the specified location.

The servo motor can rotate at a predetermined speed,

After starting the specified location to stop the instruction,

Can be set in advance to stop the location.

You can change the speed by changing the value of the options at the time of the operation,

You can also change the acceleration / deceleration time.

Phase compensation function.

The mixed function of virtual mode and real mode.

Smooth clutch linear acceleration / deceleration function.

8 axes.

Connect SSCNET III.

Control unit: pulse.

Location data: 32 data / axis.

Ideal solution for simple multi axis positioning.

A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.

The multi axis system is most suitable for simple positioning control MITSUBISHI Q172HCPU. 

Ideal selection for high speed linear positioning control in multi axis system Q172HCPU 

Linear interpolation operation with up to 4 axes can be carried out.

With the electronic gear, gap compensation, absolute position system, such as basic positioning function. "2 axes, SSCNET connection type.

2 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis MITSUBISHI Q172HCPU. 

40 pin connector.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug MITSUBISHI Q172HCPU. 

Saving wiring through SSCNET cable connections while simultaneously,

The length of the total cable distance up to 30m.

In addition, an absolute position system for determining the origin position is supported by the return data set operation of the origin MITSUBISHI Motion CPU module. 

No need for the near point block, such as wiring. "Three-phase 4 wire type.

Measuring circuit number: 3 circuits MITSUBISHI Motion CPU module. 

Measurement items: power consumption (consumption, regeneration), current, voltage, power, power factor, etc..

Power measurement module product group capable of simply measuring various energy information.

With only one module can be used to measure and power consumption (consumption and regeneration), reactive power, current, voltage, power, power factor and frequency of all kinds of detailed information MITSUBISHI Motion CPU module. 

No ladder program can continue to monitor the minimum and maximum values, can also perform 2 types of upper / lower limit alarm.

Only in the ON state can be used to measure the output of the output device.

Therefore, the amount of electricity and the quantity of electricity in the unit of the beat can be obtained during the operation of the equipment.

3 phase 3 wire products can be used to meeasure up to 4 circuits in one slot,

3 phase 4 wire products can be used to measure up to 3 circuits,

So the electrical energy measurement can be carried out in a small space by the multi circuit products Q172HCPU. 

For example, a module ccan be used to measure other loads from the control panel trunk MITSUBISHI Q172HCPU. 

In addition, Works2 GX (version 1.90U and higher) can be used to easily set parameters.