MITSUBISHI Q20UDEHCPU

Brand: MITSUBISHI 

Name: With Ethernet CPU

Model: Q20UDEHCPU

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 200 K step.

Processing speed: 0.0095 s.

Program memory capacity: 800 KB.

Support USB and network.

Support installed memory card.

Providing high speed communication between multiple CPU.

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control.

Output: 2 channels.

Input (resolution): 0~12000; -12000~12000; 0~12000; -16000~16000.

Output DC0~20mA; DC-12~12V.

Conversion speed: 10ms/1 channel.

18 point terminal station.

Isolation between channels.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark MITSUBISHI Q20UDEHCPU

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier MITSUBISHI Q20UDEHCPU. 

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module. MODBUS/TCP Master slave station.

10BASE-T/100BASE-TX MITSUBISHI Q20UDEHCPU. 

MODBUS interface module capable of connecting MODBUS compatible device such as temperature regulator, measuring device and so on.

Support MODBUS communication function, and can be compatible with the third party MODBUS to communicate from various station equipment MITSUBISHI With Ethernet CPU. 

Support MODBUS communication functions from the station, can communicate with the third party programmable controller MODBUS master device MITSUBISHI With Ethernet CPU. 

Through the linkage function, the master can be connected to the CH1 side (RS-232),

And through the QJ71MB91 and connected to the CH2 side (RS-422/485) of a number of stations for communication.

The RS-232 interface (1 credit on the 1 pass) MODBUS master device with multiple MODBUS communication from the station equipment MITSUBISHI With Ethernet CPU. (only QJ71MB91)

Master / slave station functions can be used simultaneously. (only QJ71MT91)Input: 2 channels.

10kpps.

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type).

Used to replace the A series of large modules "AD61-S1".

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control.

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter funcction,

In order to meet the needs of various applications Q20UDEHCPU. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal mannufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders MITSUBISHI Q20UDEHCPU. (QD65PD2)