MITSUBISHI Q62AD-DGH

Brand: MITSUBISHI 

Name: Current input analog module

Model: Q62AD-DGH

2 channel.

Input: DC4~20mA (connecting two wire transmitter); DC0~20mA.

Output (resolution): 0~4000. 0~12000.

Conversion speed: 10ms/ channel.

40 pin connector.

Isolation between channels.

Power supply to a two wire transmitter.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

GI-50/125 optical cable.

Double ring.

Remote I/O net (remote master station).

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station MITSUBISHI Q62AD-DGH. 

Optical fiber loop system Q62AD-DGH ..... High speed communication of 10Mbps/25Mbps is realized.

The distance between stations, the length of the total cable length, strong anti-interference.

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI Q62AD-DGH. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.Adapter for mounting DIN guide rail.

For Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, Q63B.Input voltage range: AC100-240V.

Output voltage: DC5V.

Output power: 8.5A.

Simplified program debugging.

Can use the software with the implementation of the conditions of the test function, any step in the program,

Changes the value of the soft component to a user specified value MITSUBISHI Q62AD-DGH. 

In the past, when debugging the specific loop process, the need to add a set of soft components of the program,

At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action MITSUBISHI Current input analog module. 

Therefore, do not need to change the program separately in order to debug, debugging operation is more simple MITSUBISHI Current input analog module. 

Through the expansion of soft components, more convenient to create the program.

M soft components and B soft components can be expanded to 60K points, making the program easier to understand.

Auto backup key data.

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters duue to forgetting to replace the battery MITSUBISHI Current input analog module Q62AD-DGH. 

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and oother planned downtime,

The data is lost due to battery depletion MITSUBISHI Q62AD-DGH. 

The next time the power is turned on, the backup data will be automatically restored.