MITSUBISHI Q62DA-FG

Brand: MITSUBISHI 

Name: Voltage / current output analog module

Model: Q62DA-FG

Output: 2 channels.

Input (resolution): 0~12000; -12000~12000; 0~12000; -16000~16000.

Output DC0~20mA; DC-12~12V.

Conversion speed: 10ms/1 channel.

18 point terminal station.

Isolation between channels.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module. 

SD memory card 16GB.

Can be used on the Q24DHCPCPU-V.

Can be used on the Q24DHCPCPU-LS.

Can be used on the QnUDVCPU.Compact flash memory card.

Capacity: 8GB bytes. For common cathode input module (2 line type).Input points: 32 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms MITSUBISHI Q62DA-FG. 

32 point /1 a public side.

Common cathode.

37 pin D-sub connector.

Continue to go beyond, to climb the peak of Q series 

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users MITSUBISHI Q62DA-FG. 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used MITSUBISHI Q62DA-FG. 

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location MITSUBISHI Voltage / current output analog module. 

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI Voltage / current output analog module. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI Voltage / current output analog module. Express PCI bus.

Support Japanese, English OS.

Multimode fiber optic cable.

Dual loop controller network (control station / common station).

With external power supply function.

Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.

Using Ethernet cables and connectors available on the market to reduce costs.

High speed communication capable of communicating with 1Gbps.

Improve the communication response, significantly shorten the cycle time.

Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.

Data can be read or written to other station programmable controller.

Status of IE CC-Link field network can be confirmed by Works2 GX.

Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,

So it can reduce the time of abnormal to resume normal operation.

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station.

Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.

The distance betweeen stations, the length of the total cable length, strong anti-interference Q62DA-FG. 

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI Q62DA-FG. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.