MITSUBISHI Q64TCTTBW

Brand: MITSUBISHI 

Name: Thermocouple type temperature control module

Model: Q64TCTTBW

Input: 4 channels.

Thermocouple (K, J, T, B, S, E, R, N, U, L, PLlI, W5Re/W26Re,,).

Heater disconnection detection function.

Sampling period: 0.5s/4 channel.

18 point terminal table x2.

Can be flexible in various settings, to achieve the best temperature control of the temperature control module.

Equipment for high temperature control stability of extrusion molding machine,

The temperature regulating module has the function of preventing overheating and preventing over cooling.

According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode.

In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected.

Peak current suppression.

Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost.

Heating function at the same time.

The multiple loop can reach the set value at the same time to carry out the uniform temperature control,

Helps to prevent no-load and effective energy saving and reduce operating costs.

Automatic adjustment function.

The PID constant can be adjusted automatically in the control process.

Automatic adjustment of cost (time, material and electrical energy) can be reduced. 

1 axes, open collector output type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types MITSUBISHI Q64TCTTBW. 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control Q64TCTTBW. 

(the command pulse of the open collector positioning module is highest 200kpps.) Output points: 32 points.

Output voltage and current: DC5~12V; 16mA/ point; 512mA/ common MITSUBISHI Q64TCTTBW. 

Response time: 0.5ms.

32 points and 1 common ends.

Leaky type.

40 pin connector.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias MITSUBISHI Q64TCTTBW. 

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming MITSUBISHI Thermocouple type temperature control module. 

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming MITSUBISHI Thermocouple type temperature control module. 

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area MITSUBISHI Thermocouple type temperature control module. 

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data ttransceiver time between the CPU module Q64TCTTBW. 

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily diisplayed MITSUBISHI Q64TCTTBW. 

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.