MITSUBISHI Q66AD-DG

Brand: MITSUBISHI 

Name: Current input analog module

Model: Q66AD-DG

8 channel.

Input: DC4~20mA.

Output (resolution): 0~6400; 0~3200.

Conversion speed: 10ms/ channel.

18 point terminal station.

Isolation between channels.

Power supply to a two wire transmitter.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 100 K step.

Processing speed: 0.0095 s.

Program memory capacity: 400 KB.

Support USB and network.

Support installed memory card.

Providing high speed communication between multiple CPU.

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Q66AD-DG. 

The minimum interval of the fixed period interrupt program is reduced to 100 s Q66AD-DG

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control MITSUBISHI Q66AD-DG. 

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control.8 axes.

Connect SSCNET III.

Control unit: pulse.

Location data: 32 data / axis MITSUBISHI Q66AD-DG. 

Ideal solution for simple multi axis positioning.

A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.

The multi axis system is most suitable for simple positioning control.

Ideal selection for high speed linear positioning control in multi axis system MITSUBISHI Current input analog module. 

Linear interpolation operation with up to 4 axes can be carried out MITSUBISHI Current input analog module. 

With the electronic gear, gap compensation, absolute position system, such as basic positioning function. Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Source type MITSUBISHI Current input analog module. 

18 point spring clip connection terminal.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module Q66AD-DG. 

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily diisplayed MITSUBISHI Q66AD-DG. 

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display