MITSUBISHI QD51-R24

Brand: MITSUBISHI 

Name: Intelligent communication module

Model: QD51-R24

1ch RS-232.

1ch RS-422/485.

Basic language programming module.

The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,

Starting from the programmable controller CPU to the second axis servo amplifier,

Time to output speed command of servo amplifier.

This time is the index of data transmission speed between CPU.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Input points: 64 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

32 point /1 a public side.

Common cathode.

40 pin connector.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password MITSUBISHI QD51-R24 

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet MITSUBISHI QD51-R24. 

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD51-R24. 

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Intelligent communication module MITSUBISHI Intelligent communication module. 

Can also be used in combination with the CPU module to achieve appropriate control.Control axis: up to 16 axes.

Interpolation function: linear interpolation (maximum 4 axis), arc interpolation (2 axis), spiral interpolation (3 axis) MITSUBISHI Intelligent communication module. 

PLC capacity: 60K step.

Can control the maximum 16 axis servo amplifier.

With the position control, speed control, torque control, advanced synchronous control and other rich control methods.

The incremental synchronous encoder I/F and the symbol detection signal I/F are integrated in the 1 modules.

Capacity expansion can be expanded to PLC capaciity 60K step (using Q170MSCPU-S1), the 7 layer of the substrate QD51-R24. 

Combined with the servo amplifier to achieve safe torque off (STO).

Connect directly to the visual system produced by Ethernet through the COGNEX connection.

Connecction SSCNET III /H main module LJ72MS15 can use the MELSEC-L series of input MITSUBISHI QD51-R24. 

Output module, analog input and output module, high speed counter module.