MITSUBISHI QD51

Brand: MITSUBISHI 

Name: Intelligent communication module

Model: QD51

BASIC program execution module.

RS-232.

2 channel.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,

Starting from the programmable controller CPU to the second axis servo amplifier,

Time to output speed command of servo amplifier.

This time is the index of data transmission speed between CPU.

Input points: 16 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

16 point /1 a public side.

Common cathode.

18 point terminal station.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password MITSUBISHI QD51 

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet MITSUBISHI QD51. 

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD51. 

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Intelligent communication module MITSUBISHI Intelligent communication module. 

Can also be used in combination with the CPU module to achieve appropriate control.Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 100 K step.

Processing speed: 0.0095 s.

Program memory capacity: 400 KB MITSUBISHI Intelligent communication module. 

Support USB and network.

Support installed memory card.

Providing high speed communication between multiple CPU.

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU highh-speed communication (cycle 0 QD51. 88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

Inn addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control MITSUBISHI QD51.