MITSUBISHI QD62E

 

Brand: MITSUBISHI 

Name: High speed counting module

Model: QD62E

Input: 2 channels.

200/100/10kpps.

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type).

DC12/24V.

0.1A/ point.

0.4A/ common end.

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control.

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,

In order to meet the needs of various applications. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal manufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders. (QD65PD2)

Program capacity: 60 K step.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Processing speed: 0.034 s.

Program memory capacity: 240 KB.

Support USB and RS232.

High performance CPU plus a set of rich and powerful process control instructions.

High speed and high precision machine control by multi CPU MITSUBISHI QD62E. 

By parallel processing of the linear and multi CPU high-speed communication (cycle 0 QD62E 88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control MITSUBISHI QD62E. 

The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,

Starting from the programmable controller CPU to the second axis servo amplifier,

Time to output speed command of servo amplifier.

This time is the index of data transmission speed between CPU.Input points: 16 points MITSUBISHI QD62E. 

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

16 point /1 a public side.

Common anode.

18 point terminal station.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI High speed counting module. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI High speed counting module. 

Can also be used in combination with the CPU module to achieve appropriate control.

Continue to go beyond, to climb the peak of Q series MITSUBISHI High speed counting module. 

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet.

Programming tools (Workks2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings QD62E. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method annd the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD62E.