MITSUBISHI QD75MH1

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD75MH1

"1 axes, SSCNET III type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.

Absolute position system for determining the origin position is supported by the return data set operation.

In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,

Thus greatly reducing the wiring requirements.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug. "

Input / output points: 4096 points.

Input / output soft element points: 8192.

Program capacity: 130K step.

Basic operation speed (LD): 1.9ns.

Program memory capacity: 520KB.

Peripheral device connection port: USB, Ethernet (communication support function).

Memory card I/F:SD memory card, extended SRAM card MITSUBISHI QD75MH1. 

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming QD75MH1. 

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming MITSUBISHI QD75MH1. 

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved MITSUBISHI QD75MH1. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU MITSUBISHI Corresponding III SSCNET positioning module. 

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Corresponding III SSCNET positioning module. 

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0 MITSUBISHI Corresponding III SSCNET positioning module QD75MH1. 88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

Inn addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control MITSUBISHI QD75MH1.