MITSUBISHI QD75MH4

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD75MH4

"4 axes, SSCNET III type.

2 axis /4 axis /3 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.

Absolute position system for determining the origin position is supported by the return data set operation.

In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,

Thus greatly reducing the wiring requirements.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug. "

Input / output points: 4096 points.

You can use the CF card.

Version OS:VxWorks 5.4.

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording.

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording MITSUBISHI QD75MH4 

Automatically transfer the record file to the FTP server

Simply by recording the configuration tool to carry out a simple setup,

A data record file stored on the SD memory card can be sent to the FTP server.

Because the record server can handle multiple files, it can reduce the task of management and maintenance MITSUBISHI QD75MH4. 

When a failure occurs, it can quickly respond to.

Simply extract the data associated with the problem, do not have to spend a lot of time to filter a large number of diagnostic data,

So it can quickly determine the cause of the failure, and make the solution.Specification model: Q20UDHCPU.

Input / output points: 4096 points.

Number of input and output elements: 8192 MITSUBISHI QD75MH4. 

Program capacity: 200 K step.

Processing speed: 0.0095 s.

Program memory capacity: 800 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing.

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0 MITSUBISHI Corresponding III SSCNET positioning module. 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing MITSUBISHI Corresponding III SSCNET positioning module. 

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula.

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Corresponding III SSCNET positioning module. 

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.ABS serial synchronous encoder input can be used: 2 sets of modules / units.

Position detection method: compiled on value (ABS) method.

Transmission mode: serial communication.

Allows you to track target input points: 2.

Automatically transfer the record file to the FTP server

Simply by recording the configuration tool to carry out a simple setup,

A data record file stored on the SD memory card can be sent to thhe FTP server QD75MH4. 

Because the record server can handle multiple files, it can reduce the task of management and maintenance.

When a failure occurs, it can quickly respond to.

Simply extract the data associated with the problem, do noot have to spend a lot of time to filter a large number of diagnostic data,

So it can quickly determine the cause of the failure, and make the solution MITSUBISHI QD75MH4.