MITSUBISHI QJ71C24N-R2

Brand: MITSUBISHI 

Name: Serial communication module (upgrade)

Model: QJ71C24N-R2

RS-232.

2 channel.

Transmission speed: 2 channels.

Total 230.4kbps.

Corresponding Configurator-SC Version2 GX.

Serial communication module capable of collecting and changing data of programmable controller, monitoring and managing, measuring data collection and so on.

Can achieve the highest speed of 230.4kbps, the maximum of 960 words (MC protocol communications) of the high speed and large capacity communications.

Can use MC protocol, through the external devices (PC, monitors, etc.) to implement the data read / write programmable controller.

By selecting a non sequential protocol and use sequential program for communication control, the programmable controller and the external device (barcode reader and measurement equipment),

Communication with local protocols using external devices.

QJ71C24N (-R2) through the RS-232 serial communication,

Programming and monitoring of programmable controllers using programming tools.

QJ71C24N (-R2) with the function of the modem corresponding to the public telephone line,

Can be used to initialize the modem, and the connection of the object device processing,

Communication with a remote device, a programming tool, a modem, and a public telephone line.

Using remote password,

Can be prevented by QJ71C24N (-R2) function of the modem Q series programmable controller for illegal access. 

AC input: 32 points.

Rated current and voltage: AC100 ~ 120V, 10mA (AC100V, 60Hz).

Response time: 25ms.

Input form: 1 points, 32 public ends.

External wiring connections: 38 terminals (terminals sold separately).

Replacement model: AX11.Compact flash memory card.

Capacity: 1GB bytes.Input points: 16 points MITSUBISHI QJ71C24N-R2. 

Input voltage and current: 4mA DC24V.

Response time: 0.1/0.2/0.4/0.6/1ms QJ71C24N-R2

16 point /1 a public side.

Common anode.

18 point spring clip connection terminal.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI QJ71C24N-R2. 

Can also be used in combination with the CPU module to achieve appropriate control.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password MITSUBISHI QJ71C24N-R2. 

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users MITSUBISHI Serial communication module (upgrade). 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights MITSUBISHI Serial communication module (upgrade). 

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI Serial communication module (upgrade). Input points: 32 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

32 point /1 a public side.

Common anode.

40 pin connector.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

IIn addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password QJ71C24N-R2. 

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorizeed access to unauthorized users MITSUBISHI QJ71C24N-R2. 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.