MITSUBISHI QJ71C24N-R4

Brand: MITSUBISHI 

Name: Serial communication module (upgrade)

Model: QJ71C24N-R4

RS-422/485.

2 channel.

Transmission speed: 2 channels.

Total 230.4kbps.

Corresponding Configurator-SC Version2 GX.

Serial communication module capable of collecting and changing data of programmable controller, monitoring and managing, measuring data collection and so on.

Can achieve the highest speed of 230.4kbps, the maximum of 960 words (MC protocol communications) of the high speed and large capacity communications.

Can use MC protocol, through the external devices (PC, monitors, etc.) to implement the data read / write programmable controller.

By selecting a non sequential protocol and use sequential program for communication control, the programmable controller and the external device (barcode reader and measurement equipment),

Communication with local protocols using external devices.

QJ71C24N (-R2) through the RS-232 serial communication,

Programming and monitoring of programmable controllers using programming tools.

QJ71C24N (-R2) with the function of the modem corresponding to the public telephone line,

Can be used to initialize the modem, and the connection of the object device processing,

Communication with a remote device, a programming tool, a modem, and a public telephone line.

Using remote password,

Can be prevented by QJ71C24N (-R2) function of the modem Q series programmable controller for illegal access. 

Compact flash memory card.

Capacity: 4GB bytes. Positioning: 3 axis, built-in counter function, open collector output type.

Control unit: pulse.

Number of location data: 1/ axis.

Maximum output pulse: 100Kpps.

Counter: 3 channels.

100Kpps.

Counter input signal: DV5~24V.

40 pin connector.

Positioning control using encoder feedback, especially suitable for conveying system and processing machinery, etc MITSUBISHI QJ71C24N-R4 

In the 1 single module, the 3 axis positioning function and the 3 channel counter function are integrated.

Positioning module, high-speed counter module combined as a whole,

Can effectively use the board slot and save space. "Maximum control axis: 4 axis.

Connection mode with servo amplifier: SSCNET III /H connection type MITSUBISHI QJ71C24N-R4. 

The maximum distance between the drive units: 100m.

Operation cycle: 0.88ms.

Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation.

Color signal: 4 points.

Color detecting set: 4 set.

Even the long distance wiring can be flexible.

The use of fiber optic cable, with high speed, high performance, high reliability of the servo system controller network MITSUBISHI QJ71C24N-R4. 

In addition to the traditional positioning control, but also to support speed / torque control and synchronous control.

Use simple movement module setup tool",

Can easily perform positioning settings, monitoring and debugging, etc..

In addition, the data can be collected and displayed synchronously with the motion controller MITSUBISHI Serial communication module (upgrade). 

SSCNET III /H connection to save the wiring, the maximum distance between the station up to 100m,

Absolute position system can be easily supported MITSUBISHI Serial communication module (upgrade). 

The upper limit limit switch, the lower limit switch and the near point block signal are input by the servo amplifier,

Thus greatly reducing wiring.

In addition to positioning control and speed control, but also to perform synchronization control, cam control, torque control, touch pressure control, etc MITSUBISHI Serial communication module (upgrade). .

Positioning module (QD75MH) of the project and the sequence of the previous model is highly compatible with the old model,

The project can be easily applied to the simple motion module (QD77MS). "Adapter for mounting DIN guide rail.

For Q38B-E, Q312B-E, Q612B, Q38RB, Q68RB, Q65WRB, Q38DB, Q312DB.SI/QSI/H-PCF/ broadband H-PCF optical cable.

Double circuit.

Remote I/O network (remote I/O station).

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station.

Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.

The distance between sstations, the length of the total cable length, strong anti-interference QJ71C24N-R4. 

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI QJ71C24N-R4. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.