MITSUBISHI QY40P-TS

MITSUBISHI QY40P-TS Product information and technical parameters：

Brand: MITSUBISHI 

Name: Transistor output module (spring clip terminal)

Model: QY40P-TS

Output points: 16 points.

Output voltage and current: DC12~24V; 0.1A/ point; 1.6A/ common.

OFF leakage current: 0.1mA;

Response time: 1ms; 1 point 16 public end; leaky type.

18 point spring clip connection terminal.

With heat protection.

With short circuit protection.

With the surge absorber.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

8 channel.

Input: DC0~20mA.

Output (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; 0~16000; -16000~16000.

Conversion speed: 80 s/1 channel.

18 point terminal station."2CH RS-232.

QJ71C24N (-R2) through the RS-232 serial communication,

Programming and monitoring of programmable controllers using programming tools MITSUBISHI QY40P-TS. 

QJ71C24N (-R2) with the function of the modem corresponding to the public telephone line,

Can be used to initialize the modem, and the connection of the object device processing,

Communication with a remote device, a programming tool, a modem, and a public telephone line QY40P-TS 

Using remote password,

Can be prevented by QJ71C24N (-R2) function of the modem Q series programmable controller for illegal access MITSUBISHI QY40P-TS. 

Serial communication module capable of collecting and changing data of programmable controller, monitoring and managing, measuring data collection and so on.

Can achieve the highest speed of 230.4kbps, the maximum of 960 words (MC protocol communications) of the high speed and large capacity communications.

Can use MC protocol, through the external devices (PC, monitors, etc MITSUBISHI QY40P-TS. ) to implement the data read / write programmable controller.

By selecting a non sequential protocol and use sequential program for communication control, the programmable controller and the external device (barcode reader and measurement equipment),

Communication with local protocols using external devices. "Measurement items: leakage current (Io), resistive leakage current (Ior).

Measuring circuit number: 2 circuits.

Insulation monitoring module for measuring leakage current.

Leakage current can be measured to ensure safety by monitoring the leakage current (Io), can detect the risk of electric shock.

Insulation state measurement of resistive leakage current (Ior) can be monitored continuously and continuously,

In order to continuously monitor the insulation aging status of the equipment.

Each measurement project can be carried out in the 2 phase of the alarm monitoring can be respectively on the leakage current (Io), resistive leakage current (Ior) for the 2 phase of the alarm monitorring,

No ladder diagram program QY40P-TS. Alarm monitoring is divided into 2 stages of attention alarm and danger alarm.

A module can measure two circuits of a module can be two circuits on the same line in the same system type power measurement.

Inn addition, Works2 GX (1 QY40P-TS. 90U version or higher version) can be used to easily set the parameters.

Leakage current (Io), resistive leakage current (Ior).