MITSUBISHI QY80

Brand: MITSUBISHI 

Name: Transistor output module (source)

Model: QY80

Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Source type.

18 point terminal station.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Input: 8 channels.

30kpps/10kpps/1kpps/100pps/50pps/10pps/1pps/0.1pps.

Counter input signal: DC5/12-24V.

The module is suitable for the measurement of the number of input pulses, such as speed, speed, instantaneous flow rate and so on,

As well as the quantity, the length, the cumulative flow and so on the measurement MITSUBISHI QY80. 

Input pulse values are updated every 10ms.

The number of pulses (sampling pulse number), which can be accumulated and processed by the moving average, is updated according to the counting period QY80 For A6TBXE/A6TBY36E/A6TBX54E/A6TBY54E/A6TBX70E (common cathode; source) long 5m.32 point connector for welding (37 pin D-Sub connector).Control axis: maximum 8 axes.

Greater flexibility MITSUBISHI QY80. 

PLC control and motion control using independent CPU, optimize the system configuration.

More than 4 CPU modules can be freely selected in multi CPU system.

MITSUBISHI SSCNET control function.

By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.

The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified MITSUBISHI QY80. 

Each 1 CPU can control up to 32 axes at the same time.

Can control the small capacity from 10W to 55KW large capacity servo motor.

Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring MITSUBISHI Transistor output module (source). Control axis: maximum 8 axes.

Peripheral I/F: by CPU PLC.

Manual pulse generator operation function: can use 3 sets of manual pulse generator MITSUBISHI Transistor output module (source). 

Synchronous encoder operation function: can use 8 synchronous encoder.

CPU special high speed communication bus, each 0.88ms cycle can exchange 14K data word.

Exercise basic performance is about 2 times, sports SFC processing time is reduced by about 1/4 MITSUBISHI Transistor output module (source). 

PLC interrupt program to achieve high-speed synchronization between multiple CPU.

Motion specific instruction.Express PCI bus.

Support Japanese, English OS.

Multimode fiber optic cable.

Dual loop controller network (control station / common station).

With external power supply function.

Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.

Using Ethernet cables and connectors available on the market to reduce costs.

High speed communication capable of communicating with 1Gbps.

Improve the communication response, significantly shorten the cycle time.

Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.

Data can be read or written to other station programmable controller.

Status of IE CC-Link field network can be confirmed by Works2 GX.

Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,

So it can reduce the time of abnormal to resume normal operation.

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station.

Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.

The distance beetween stations, the length of the total cable length, strong anti-interference QY80. 

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI QY80. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.