MITSUBISHI QY81P

Brand: MITSUBISHI 

Name: Transistor output module (source)

Model: QY81P

Output points: 32 points.

Output voltage and current: DC12~24V; 0.1A/ point; 2A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

32 points and 1 common ends.

Source type.

40 pin connector.

With heat protection.

With the surge absorber.

With fuse.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 30 K step.

Processing speed: 0.02 s.

Program memory capacity: 120 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing MITSUBISHI QY81P. 

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0  QY81P 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula MITSUBISHI QY81P. 

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.Output: 2 channels.

Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000.

Output: DC-10~10V; DC0~20mA MITSUBISHI QY81P. 

Conversion speed: 80 s/1 channel.

18 point terminal station.

Transformer isolation between power supply and output.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required MITSUBISHI Transistor output module (source). 

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module MITSUBISHI Transistor output module (source). 

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control MITSUBISHI Transistor output module (source). 

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module QY81P. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of thee positioning of the industry, the control needs of various fields MITSUBISHI QY81P. 

Can also be used in combination with the CPU module to achieve appropriate control.