DELTA PLC DVP32EH00R3

The new generation DVP-EH3 PLC is the high-end model of the Delta DVP-E series. 

It provides larger program capacity and data registers for more demanding and complex applications. 

Applications 

High-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line. 

Specifications 

Excellent Motion Control 

1)        High-speed ulse output: 4sets of 200kHz pulse output (DVP40/48/64/80EH00T3) 

2)        Supports max. 4 hardware 200kHz high-speed counters 

3)        Increases many motion control instructions to meet the applications that require high-speed and high-precision 

4)        positioning control such as labeling machines, packaging machines and printing machines 

5)        Offers linear / arc interpolation motion control 

6)        Provides up to 16 external interrupt pointers 

Complete Program 

1)        Auto backup function to prevent losing programs and data even when the battery runs out 

2)        Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged 

3)        Up to 4-level password protects your source programs and inlectual property 

Outstanding Operation Performance 

1)        CPU + ASIC dual processors support floating point operations. 

2)        The max. execution speed of basic instructions is able to reach 0.24μs. 

Flexible Function Extension Modules & Cards 

The multiple selections of extension modules and function cards provide analog I/O, temperature measurement,additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available. 

PLC-Link 

C-Link allows the user to link up a max. 32 units to the network without having to install extra communication extension modules. 

Brand-New High-Speed Extension Modules 

The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program. 

Built-in 4 Hardware High-Speed Counters 

Standard		Hardware high-speed counter
1 phase 1		1 phase 1		1 phase 2		2 phase 2
sets	bandwidth	sets	bandwidth	sets	bandwidth	sets	bandwidth
8	10KHz	4	200KHz/20KHz	2/2	200KHz/20KHz	2/2	200KHz/20KHz

Electrical Specifications 

Model  Items		16EH  00_3	20EH  00_3	32EH  00_3	32EH  00M3	40EH  00_3	48EH  00_3	64EH  00_3	80EH  00_3
Power supply  voltage		100 ~ 240VAC (-15% ~ 10%); 50/60Hz + - 5%
Fuse capacity		2A/250VAC
Power  consumption		50VA		60VA				80VA
DC24V current  output		500mA
Power supply		DC24V output short circuit
Voltage  withstand		1,500VAC (Primary-secondary), 1,500VAC (Primary-PE),  500VAC (Secondary-PE)
Insulation  resistance		> 5M Ohm at 500VDC (between all I/O points and ground)
Noise immunity		ESD: 8KV Air Discharge  EFT: Power Line: 2KV, Digital I/O: 1KV, Analog & Communication I/O: 250V  Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV, RS: 26MHz ~  1GHz, 10V/m
Grounding		The diameter of grounding wire shall not be less than that of L, N terminal of  the power supply. (When many PLCs are in use at the same time, please  make sure every PLC is properly grounded.)
Operation/  storage		Operation: 0 °C ~55 °C (temperature), 50~95% (humidity), pollution degree 2  Storage: -25 °C ~70 °C (temperature), 5~95% (humidity)
Vibration/shock  resistance		International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 &  IEC 68-2-27 (TEST Ea)
Weight (g)	R	500	520	652	644	710	748	836	948
	T	480	500	612		675	688	756	848

  

Input Point
Spec  Items		Two Differential  inputs (200kHz)	24VDC single common port input
			200kHz	20kHz	Normal input
Input wiring type		Independent  wiring	Change wiring from S/S to SINK or SOURCE
Input indicator		LED display; light on = ON, light off = OFF
Input voltage (+ - 10%)		5~24VDC	24VDC
Input point configuration		#1	#2	#3	#4	#5
Input impedance		4.7K Ohm	3.3K Ohm	3.3K Ohm	4.7K Ohm	4.7K Ohm
Active Level	OffàOn	> 1mA (5V)	> 2mA (15V)
	OnàOff	< 0.4mA (2V)	< 0.5mA (5V)
Responsetime #5	OffàOn	< 150ns	< 150ns	< 3.5us	< 8us	< 10ms
	OnàOff	< 3us	< 3us	< 20us	< 60us	< 20ms

  

Output Point
Spec     Items		Two  differential  outputs	Single common port  transistor output			Single common port  relay output
			Low speed	High speed	Normal  output
Max. frequency		200kHz	10kHz	200kHz		Load ON/OFF control
Minimum load		/				2mA/DC power
Working voltage		5VDC	5 ~ 30VDC			< 250VAC, 30VDC
Insulation		Line Driver	Photo coupler isolation			Magnetic isolation
Maximum  load	Resistive	< 25mA	0.5A/1 point (4A/COM)			2A/1 point (5A/COM)
	Inductive	/	12W (24VDC)			#1
	Lamp	/	2W(24VDC)			20WDC/100WAC
Max. output response  time		0.2us	0.2us	OffàOn: 20us  OnàOff: 30us		10ms

Profil produk & Dimensi