FX3U-485ADP-MB

Spesifications

• Manufacturer: Mitsubishi Electric 

• FX3U-485ADP-MB
• Transmission standard: RS-485 standard, conform to the RS-422 standard 
• Insulation method:Photocoupler 
• Transmission distance: The total length 500m or less
  (to the equipment to be connected FX2N-485-BD, FX1N- 485-BD, FX3U-485-BD, following the total length 50m if it contains a FX3G-485-BD) 
• External device connection method: Europe terminal block 
• Communication system: Half-duplex bi-directional 
• Communication procedure: . MODBUS (master or slave) - No-protocol communication, computer link (dedicated protocol format 1, dedicated protocol format 4), parallel link and simple PC-to-PC link inverter communication 
• communication speed MODBUS communication: 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps)
  corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012. (Serial number: 127 **** or later) 
• No-protocol, the computer link: 300/600/1200/2400/4800/9600/19200/38400 (Bps)
  FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. 
• Parallel link: 115200 (bps) 
• Simple PC-to-PC link: 38400 (bps) 
• Inverter communication: 4800/9600/19200/38400 (Bps)
  FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. 
• Display (LED): RD, SD, POWER 
• O occupied points: 0 points (no relation to the maximum input and output points of the sequencer) 
• Apply sequencer: [FX3S]
  V1.00 and later: corresponding to all the communication function 
• [FX3G]
  V1.00 and later: MODBUS, corresponding to the communication functions other than the inverter communication
  V1.10 and later: inverter communication function to the corresponding
  V1.30 and later: in MODBUS communication function correspondence 
• [FX3U]
  V2.20 and later: communication functions other than the MODBUS communication to the corresponding
  V2.40 and later: corresponds to the MODBUS communication function 
• [FX3GC]
  V1.40 and later: corresponding to all the communication function 
• [FX3UC]
  V1.00 and later: MODBUS communication communication function to the corresponding non-
  V2.40 and later: corresponds to the MODBUS communication function.
• connection to FX3S is required FX3S-CNV-ADP. 
• Connection to the FX3G is required FX3G-CNV-ADP. 
• FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board. 
• mass: 0.08kg 
• Power Specifications: 
• Power supply: DC5V 20mA (internal power supply from the sequencer) 
• Ambient temperature: 0 ~ 55 °C ..... operation, -25 ~ 75 °C ..... during storage 
• Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation 
• Vibration resistance When the DIN rail mounting : Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• When the DIN rail mounting : Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time : Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time : Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Impact: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each 
• Anti-noise: Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator 
• Withstand voltage: External terminals and between the PLC main unit of the ground terminal: AC500V 1 minute 
• Insulation resistance: External terminals and between the PLC main unit of the ground terminal: DC500V 5MΩ more in insulation resistance tester 
• Use atmosphere: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly 
• Advanced use: 2000m or less can not be used in the pressurized environment to more than atmospheric pressure. 
• There is a possibility of failure. 
• Shipping Weight : 1 Kg