ELECTRONIC SENSOR TRAINER

Deskripsi

Trainer sensor elektronik adalah set alat percobaan Sains yang berisi papan utama mikrokontroler, berbagai modul sensor, aktuator dan output dengan perangkat tampilan dan alat perangkat lunak. Mereka bekerja bersama untuk membuat konsep baru percobaan sains dan menambah pengalaman pemrograman untuk mengembangkan proyek sains utama.

Fitur

• Pelajari dan coba perilaku masing-masing sensor untuk memahami operasinya. 
• Termasuk pengoperasian mikrokontroler BASIC Stamp2SX. 
• Peserta didik dapat menerapkan semua pengetahuan untuk mengembangkan percobaan sains baru dengan cara yang berbeda. 
• Sistem pengumpulan data menggunakan Perangkat Lunak DAQ. 
• Eksperimen dapat memperoleh data dari sistem untuk dikumpulkan dan dikirim ke komputer untuk memproses atau memplot grafik. 
• Kontrol perangkat aktuator seperti Relay, motor DC, motor Stepper, dll. 
• Untuk membuat proyek kontrol otomatis, proyek sains modern.

PRODUCT MODULES

1. SMART SCIENCE EXPERIMENT BOARD
    Operation compatible with BASIC Stamp2SXmodule (BS2SX-IC)
    Use interpreter from Parallax
    16 KByte memory for program and data
    Plug on 24-pin DIP socket similar BS2SX-IC

2. 38KHz INFRARED MODULE
    Detect modulated 38kHz carrier frequency infrared light 38KHz INFRARED MODULE
    Detect modulated 38kHz carrier frequency infrared light

3. INFRARED DETECTOR
    Detect the infrared light in analog (voltage) and digital signal by using Photo-transistor

4. INFRARED LED
    Drive with logic HIGH TTL level 2-mode operations: Continuous drive
    Frequency drive

5. LIGHT DETECTOR
    Detect light density.
    2 outputs: Positive and Negative voltage reaction when detect light

6. LIGHT REFLECTOR
    Includes Super-bright Red LED as light source and LDR that receive reflection light. Output very                                      following reflection light density.

7. LED INDICATOR
    HIGH: Logic 1 apply,
    LED lights Red.
    LOW: Logic 0 apply,
    LED lights Green.
    If not: LED turns off

8. SOUND DETECTOR
    Detect sound level changing event. Output is logic

9. SWITCH INPUT
    HIGH: Logic 1 apply,
    LED lights Red.
    LOW: Logic 0 apply,
    LED lights Green.
    Not press: LED turns off

10. TEMPERATURE SENSOR
      Measure temperature change by Thermistor.
      2 outputs voltage: Positive and Negative co-efficiency

11. RESISTANCE MEASUREMENT
      Measure resistance value
      Output: 1mv/Ω

12. MAGNETIC FIELD SENSOR
      Measure magnetic field density.
      If no detect output: +2.5V
      Sensitivity: 1.3mV/Gauss.

13. VERTICAL POTENTIOMETER
      Type of variable resistor.
      Adjustable: 0…5V

14. CURRENT MEASUREMENT
      Measure DC current by series connection.
     Output: 5 mV/mA.
     Full Range is 1,000mA.

15. COMPARATOR
    Compare apply voltage between ch-A and ch-B.
    Output is logic 0 with indicator.
    Vin (max) is 3.5Vdc

16. ATTENUATOR
      Measure DC voltage.
      2 attenuator ratios:
      1:1 for 0 to +5V input
      2:1 for 0 to +10V input
      not use to measure SCi-BOX internal system

17. SLIDE VARIABLE RESISTOR
      Type of variable
      resistor
      Adjustable: 0…5V

18. CAPACITANCE MEASUREMENT
      Measure capacitance value in Farad unit by RC time constant operation.

19. DC MOTOR
      Input: 6-12 VDC

20. STEPPER MOTOR
      Input: 12 VDC