ICPDAS NS-205/NS-205R NS-205A NS-105A

 

Unmanaged 5-port Industrial 10/100 Mbps Ethernet Switch

Introduction

The NS-205/NS-205A/NS-105A has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M auto-negotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switches the transmission speed (10Mbps or 100 Mbps) for corresponding connections. The fl ow control mechanism is also negotiated. There is activity/link/ data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-205/NS-205A is just 33 mm, so it can be used where space is limited.

The NS-205A/NS-105A provides +12 VDC ~ +56/53 VDC power input to fi t various power source.

Ordering Information

NS-205 CR Unmanaged 5-port Industrial Ethernet Switch (RoHS)

NS-205R CR Unmanaged 5-port Industrial 10/100 Mbps Ethernet Switch with conformal coating (RoHS)

NS-205A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +12 VDC ~ +56 VDC (RoHS)

NS-105A CR Unmanaged 5-port Industrial Ethernet Switch with Power Input +12 VDC ~ +53 VDC (RoHS)

Accessories

GPSU06U-6 CR Power Supply, 110~240 VAC to 24 VDC/0.25 A, 6 W, two pins USA plug (RoHS)

GPSU06E-6 CR Power Supply, 110~240 VAC to 24 VDC/0.25 A, 6 W, two pins EURO plug (RoHS)

MDR-20-24 CR Power Supply, 85~264 VAC to 24 VDC/1 A, 24 W, DIN-rail mounting (RoHS)

MDR-60-48 CR Power Supply, 85~264 VAC to 48 VDC/1.25 A, 60 W, DIN-rail mounting (RoHS)

ICPDAS tM-P8 & tM-PDW8 8-channel Isolated Digital Input Module

Introductions

The tM-P8 off ers 8 channels for digital input, each of which features photocoupler isolation. In addition, digital input can be either sinkor source-type using wire connections and all channels can be used as 16-bit counters. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided. The tM-PDW8 off ers 8 channels for digital input, catering for both dry and wet contact, with an eff ective distance for dry contact of up to 500 meters. All channels not only feature Photocoupler isolation, but can also be used as 16-bit counters. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided.

Features 

 Sink-type Digital Outputs 

 Photocouple Isolation 

 Dual Watchdog 

 Confi gurable Power-on Value Settings 

 Confi gurable Safe Value Settings 

 Cost-effective 

 Wide Operating Temperature Range: -25 ~ +75°C

Applications 

• All Types of On/Off Contro 

• Industrial Automation 

• Industrial Machinery 

• Building Automation 

• Food and Beverage Systems 

• Semiconductor Fabrication 

• Control Systems

ICPDAS tM-C8 8-channel Isolated Digital Output Module

 

Introduction 

I/O Specifi cations The tM-C8 provides 8 channels for digital output, each of which features photocouple isolation. The tM-C8 supports sink-type output with short circuit protection and there are options for configuing power-on and safe digital output values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided. 

Applications 

• All Types of On/Off Contro 

• Industrial Automation 

• Industrial Machinery 

• Building Automation 

• Food and Beverage Systems 

• Semiconductor Fabrication 

• Control Systems

Features 

 Sink-type Digital Outputs 

 Photocouple Isolation 

 Dual Watchdog 

 Confi gurable Power-on Value Settings 

 Confi gurable Safe Value Settings 

 Cost-effective 

 Wide Operating Temperature Range: -25 ~ +75°C

ICPDAS M-7002 4-ch AI, 5-ch DI and 4-ch Relay Module

Introduction

The M-7002 is a 16-bit, 4-channel diff erential analog input, 5-channel digital input, and 4-channel relay output. All of its channels are Form A type relay module that provides programmable input range on all analog channels (±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20mA, 0 ~ 20 mA, and 4 ~ 20 mA) and digital output can be set alarm output with short-circuit protection and overload protection. Each analog channel is allowed to confi gure an individual range and has 240 Vrms high overvoltage protection. Jumper selectable for voltage or current input. The sampling rate of M-7002 is changeable; there are fast mode and normal mode for your consideration. M-7002 also has a qualifi cation for 4 kV ESD protection as well as 2500 VDC intra-module isolation.

Features

 Voltage and Current Inputs

 High Resolution: 16 bit

 Sink and Source Type Digital Inputs

 Photocoupler Isolation

 Support Relay Outputs

 Dual Watchdog

Applications

• Building Automation

• Factory Automation

• Machine Automation

• Remote Maintenance

• Remote Diagnosis

• Testing Equipment

ICPDAS M-7024U & M-7024UD

 

Introduction

The M-7024U is a multi-function module that includes 4 analog output channels, 4 digital input channels, 4 digital output channels. It provides a programmable output range on all analog outputs channels (0 ~ 5 V, +/-5 V, 0 ~ 10 V, +/-10 V, +4 ~ +20 mA or 0 ~ +20 mA). Each analog output channel can be configured for an individual range and the module also features per-channel open wire detection for +4 ~ +20 mA outputs, together with 8 kV ESD Protection as well as 2500 VDC intra-module isolation. Options for confi guring power-on and safe values are also included.

Features 

 Multi-function=4 AO + 4 DI + 4 DO 

 Source Type Current Output 

 16-bit Analog Output 

 Individual Channel Confi guration 

 Open Wire Detection for Current Output 

 8 kV ESD Protection 

 Power-on Value Setting 

 Safe Value Setting 

 Wide Operating Temperature Range: -25 to +75°C

Applications

• Building Automation 

• Factory Automation 

• Machine Automation 

• Remote Maintenance 

• Remote Diagnosis 

• Testing Equipment

ICPDAS RPAC-2658M Win-GRAF based LinPAC-2000

• 
  Introduction

The Win-GRAF LinPAC-2000 Series (RPAC-2658M) is the new generation Linux based Win-GRAF PAC (ProgrammableAutomation Controller) from ICP DAS. This PAC is equipped with a Quad-core Cortex-A9 CPU (1 GHz) and running a Linuxoperating system. Using the built-in microSD, the RPAC-2658M can save application programs, fi les, and data.

The benefits of running Linux on a Win-GRAF PAC device include real-time capability, achievable deterministic control, and allowing PAC can have a PC-like operating environment. The PAC is capable of running Win-GRAF (IEC 61131-3 Standard) software to develop logic control applications and also supporting C, C++ to develop data management applications that can exchange data with Win-GRAF applications. So the application's design is more convenient and more practical.

Win-GRAF is a powerful, PLC-like, softlogic development software. It is installed on PC with Windows 7/8 (or later version). It supports the international PLC language standard - IEC 61131-3 - Ladder Diagram (LD), Function Block Diagram (FBD),Sequential Function Chart (SFC), Structured Text (ST), Instruction Set (IL), suitable to develop applications for the full range of Win-GRAF PACs from ICP DAS.

The features of the Win-GRAF:

¢ IEC 61131-3 Standard Open PLC Syntax (LD, FBD, SFC, ST, IL)

¢ Using ST Syntax in the FBD or LD Program

¢ Event Triggered Data Binding (Exchange Data between PACs)

¢ Online Debugging/Control/Monitoring, Offl ine Simulation

¢ On Line Change

¢ Various Protocols:

- Modbus TCP/UDP, Modbus RTU/ASCII Master

- Modbus TCP, RTU Slave

- DCON ...

¢ Plenty of Functions, Function Blocks, I/O Boards

¢ Redundancy

- For XP-8xx8-CE6 and RPAC-2658M