OMRON CJ1W-MD263

CJ1W-MD263 DC Input/Transistor Output Unit (24 VDC 32 Inputs/32 Outputs)

Name	32-point DC Input/32-point Transistor Output Unit with MIL Connectors (Sinking Outputs)
Model	CJ1W-MD263
Output section (CN1)		Input section (CN2)
Rated Voltage	12 to 24 VDC	Rated Input Voltage	24 VDC
Operating Load  Voltage Range	10.2 to 26.4 VDC	Operating Input  Voltage	20.4 to 26.4 VDC
Maximum Load  Current	0.3 A/point, 1.6 A/common, 3.2 A/Unit	Input Impedance	5.6 kΩ
Maximum Inrush  Current	3.0 A/point, 10 ms max.	Input Current	4.1 mA typical (at 24  VDC)
Leakage Current	0.1 mA max.	ON Voltage/ON  Current	19.0 VDC min./3 mA  min. *2
Residual Voltage	1.5 V max.	OFF Voltage/OFF  Current	5 VDC max./1 mA max.
ON Response  Time	0.5 ms max.	ON Response Time	8.0 ms max. (Can be set  to between 0 and 32 in  the Setup.) *1
OFF Response  Time	1.0 ms max.
No. of Circuits	32 (16 points/common, 2 circuits)	OFF Response Time	8.0 ms max. (Can be set  to between 0 and 32 in  the Setup.) *1
Fuse	None
External Power  Supply	10.2 to 26.4 VDC, 30 mA min.	No. of Circuits	32 (16 points/common,  2 circuits)
		Number of  Simultaneously  ON Points	75% (24 points) (at 24  VDC)
Insulation  Resistance	20 MΩ min. between the external terminals and the GR terminal (at 100 VDC)
Dielectric  Strength	1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of  10 mA max.
Internal Current  Consumption	5 VDC 140 mA max.
Weight	110 g max.
Accessories	None
Circuit  Configuration	CN1 (OUT)	CN2 (IN)
	The signal names of the terminals are the  device variable names.  The device variable names are the names that  use "Jxx" as the device name.	The signal names of the terminals are the  device variable names.  The device variable names are the names that  use "Jxx" as the device name.
External  connection and  terminal-device  variable diagram	CN1 (OUT)	CN2 (IN)
	Be sure to wire both terminals 23 and 24  (COM0) of CN1.  Be sure to wire both terminals 3 and 4 (COM1)  of CN1.  Be sure to wire both terminals 21 and 22 (+V) of  CN1.  Be sure to wire both terminals 1 and 2 (+V) of  CN1.  When wiring, pay careful attention to the polarity  of the external power supply. The load may  operate incorrectly if polarity is reversed.  The signal names of the terminals are the  device variable names.  The device variable names are the names that  use "Jxx" as the device name.	Be sure to wire both pins 23 and 24 (COM2) of  CN2, and set the same polarity for both pins.  Be sure to wire both pins 3 and 4 (COM3) of  CN2, and set the same polarity for both pins.  When wiring, pay careful attention to the polarity  of the external power supply. The load may  operate incorrectly if polarity is reversed.  The signal names of the terminals are the  device variable names.  The device variable names are the names that  use "Jxx" as the device name.

With MIL connector (40-pin × 2)
CJ1W-MD263
CJ1W-MD563

CJ-series Mixed I/O Units CJ1W-MD :CJ1W-MD231,CJ1W-MD233, CJ1W-MD261,CJ1W-MD263,CJ1W-MD232,CJ1W-MD563

- DC Input Transistor Output Units, Output type sinking, I/O points 16 inputs 16 Output, Input Voltage input current 24 VDC 7 mA Commons 16 points 1 common, Maximum switching capacity 250 VAC/24 VDC 0.5 A Commons 16 points 1 common, External connection Fujitsu connector, No of words allocated 2 words, Current consumption (A) 5 V 0.13 : CJ1W-MD231

- DC Input Transistor Output Units, Output type sinking, I/O points 16 inputs 16 Output, Input Voltage input current 24 VDC 7 mA Commons 16 points 1 common, Maximum switching capacity 12 to 24 VDC 0.5 A Commons 16 points 1 common, External connector MIL connector, Current consumption (A) 5 V 0.13  : CJ1W-MD233

- DC Input Transistor Units, Output type sinking, I/O points 32 Inputs 32Output, Input Voltage input current 24 VDC 4,1 mA Commons 16 points 1 common, Maximum switching capacity 12 to 24 VDC 0.3 A, Commons 16 point 1 common, External connection Fujitsu connector, Current consumption (A) 5 V 0.14  : CJ1W-MD261

- DC Input Transistor Units, Output type sinking, I/O points 32 Inputs 32 Output, Input Voltage input current 24 VDC 4.1 mA Commons 16 points 1 common, Maximum switching capacity 12 to 24 VDC 0.3 A Commons 16 point 1 common, External connection MIL connector, No of words allocated 4 words, Current consumption (A) 5 V 0.14  : CJ1W-MD263

- DC Input Transistor Units, Output type Sourcing, I/O points 16 inputs 16 outputs, Input Voltage input current 24 VDC 7 mA Commons 16 points 1 common, Maximum switching capacity 24 VDC 0.5 A Shortcircuit protection Commons 16 points 1 common, External connection MIL connector, No  of words allocated 2 words, Current consumption  (A) 5 V 0.13   : CJ1W-MD232

- TTL I/O Units, Output type - , I/O points 32 inputs 32 output, Input Voltage input curent 5 VDC 35 mA Commons 16 points 1 common , Maximum switching capacity 5 VDC 35 mA Commons 16 points 1 common, External connection MIL connector, No of words allocated 4 words, Current consumption CJ1W-MD563