Kontak Kami

KONTAK KAMI : Telpon : 02126071413 Hp/WhatsApp : 081212269831 Perwakilan Jakarta : Gedung LTC Glodok Lantai 1 Blok C30 No.31 Jl.Hayam Wuruk No.127 Jakarta , Indonesia
Tampilkan postingan dengan label CJ1W-NC213. Tampilkan semua postingan
Tampilkan postingan dengan label CJ1W-NC213. Tampilkan semua postingan

Senin, 22 Oktober 2018

OMRON CJ1W-NC213



Basic Specifications

ItemModel
CJ1W-NC113/133CJ1W-NC213/233CJ1W-NC413/433
Power supply 
voltage
5 V DC (for the PCU itself)
24 V DC (external power supply)
5 V DC (external power supply; line driver output only)
Allowable power
supply voltage 
range
4.75 to 5.25 V DC (for the PCU itself)
21.6 to 26.4 V DC (external power supply)22.8 to 25.2 V DC 
(external power supply)
4.75 to 5.25 V DC (external power supply; line driver output only)
Internal current 
consumption
250 mA max. at 5 V DC250 mA max. at 5 V DC360 mA max. at 5 V DC
Current 
consumption of 
external power 
supply
NC113: 30 mA max. at 24 V DC
NC133: 10 mA max. at 24 V DC
NC133: 60 mA max. at 5 V DC
NC213: 50 mA max. at 24 V DC
NC233: 20 mA max. at 24 V DC
NC233: 120 mA max. at 5 V DC
NC413: 100 mA max. at 24 V DC
NC433: 30 mA max. at 24 V DC 
NC433: 230 mA max. at 5 V DC
External 
dimensions
90 (H) × 31 (W) × 65 (D) (all models)
Weight100 g max.100 g max.150 g max.
Ambient 
operating 
temperature
0 to 55 ° C0 to 50 ° C *
Note: Specifications not listed above conform to CJ Series general specifications. 
* Refer to Operation Manual 3-3-5 Mounting Precaution for CJ1W-NC413/NC433 for information on the ambient operating 
  temperature of the CJ1W-NC413/433.

Performance Specifications

ItemModel
CJ1W-NC113/133CJ1W-NC213/233CJ1W-NC413/433
Applicable PLC modelsCJ-series PLCs *1
Unit typeSpecial I/O Unit
I/O requirementsWords5 words10 words20 words
Controlled driverPulse-train input-type Servo Drive or stepping motor driver 
NC113/213/413 models have open collector output. 
NC133/233/433 models have line driver output.
ControlControl systemOpen-loop control by pulse train output
Number of control 
axes
1 axis2 axes4 axes
Control unitPulse
Positioning operationsTwo types: memory operation and direct operation
Positioning 
operations
Independent1 axis2 independent axes4 independent axes
Linear interpolationNone2 axes max.4 axes max.
Speed control1 axis2 independent axes4 independent axes
Interrupt feeding1 axis2 independent axes4 independent axes
PositionsRange-1,073,741,823 to 1,073,741,823 pulses *2
Data items100/axis
SpeedsRange1 pps to 500 kpps
Data items100/axis
Acceleration and 
deceleration times
Range0 to 250 s, until maximum speed is reached.
Data items9/axis for acceleration and deceleration each
Functions and 
settings
Origin searchOrigin proximity input signal: selectable (absent, N.O. or N.C. contact). 
Origin input signal: selectable (N.O. or N.C. contact) 
Origin compensation: -1,073,741,823 to 1,073,741,823 pulses 
Origin search speed: High-speed or proximity-speed can be set. 
Origin detection method: May be set to stop upon origin input signal after proximity input 
signal has turned ON, to stop upon origin input signal after proximity input signal has 
turned OFF, to stop upon origin input signal without using proximity input signal, or to stop 
upon origin input signal after limit input signal has turned OFF. 
N.O. = Normally open 
N.C. = Normally closed
JoggingJogging can be executed at a specified speed.
Dwell times19/axis can be set from 0 to 9.99 s (unit: 0.01 s).
Acceleration/ 
deceleration curves
Trapezoidal or S-curve (Can be set separately for each axis.)
ZonesZone Flag turns ON when present position is within a specified zone. Three zones can be 
set for each axis.
Software limitsCan be set within a range of -1,073,741,823 to 1,073,741,823 pulses.
Backlash 
compensation
0 to 9,999 pulses. Compensation speed can also be set.
TeachingWith a command from the PLC, the present position can be taken as the position data.
Deceleration stopThe STOP command causes positioning to decelerate to a stop according to the specified 
deceleration time.
Emergency stopPulse outputs are stopped by an external emergency stop command.
Present position 
preset
The PRESENT POSITION PRESET command can be used to change the present position 
to a specified value.
OverrideWhen the override enabling command is executed during positioning, the target speed is 
changed by applying the override coefficient. Possible to set to a value from 1 to 999% (by 
an increment of 1%)
Data saving1) Saving to flash memory. (Can be written 100,000 times.) 
2) Reading from PLC area by data reading instruction. 
3) Reading by Support Software and saving to personal computer hard disk or floppy disk.
External I/OInputsPrepare the following inputs for each axis: 
CW and CCW limit input signals, origin proximity input signal, origin input signal, emergency 
stop input signal, positioning completed signal, interrupt input signal
OutputsPrepare the following outputs for each axis: 
Pulse outputs 
CW/CCW pulses, pulse outputs and direction outputs can be switched. 
Either error counter reset or origin-adjustment command outputs can be selected 
depending on the mode.
Pulse output distribution period1-axis operation: 4 ms 
Linear interpolation: 8 ms
Response timeRefer to Operation manual Appendix A Performance Characteristics.
Self-diagnostic functionFlash memory check, memory loss check, CPU bus check
Error detection functionOvertravel, CPU error, software limit over, emergency stop

Kamis, 27 Juli 2017

CJ1W-NC[][]3 CJ series Position Control Units: CJ1W-NC113,CJ1W-NC213,CJ1W-NC413,CJ1W-NC133,CJ1W-NC233,CJ1W-NC433,CJ1W-SP001



- CJ1 Special I/O Units,Position control unit,  Control Method/Control output interface Open-loop control by pulse train output/Open Collector output, Number of Control axes 1 axis, Current Consumption (A) 5 V 0.25 : CJ1W-NC113
- CJ1 Special O/I Units, Position Control unit, Control Method/Control output interface Open-loop Control by pulse trein output/Open Collector output, Number of Control axes 2 axes, No of numbers allocated - , Current Consumption (A) 5 V 0.25 : CJ1W-NC213
- CJI Special I/O Units, Position Control Unit, Control Method/Control Output interface Open-loop control by pulse train output/Open collector output, Number of Control axes 4 axes, No of Unit Numbers allocated 2, Current Consumption (A) 5 V 0.36  : CJ1W-NC413
- CJ1 Special I/O Units, Position Control Unit, Control Method/Control Output interface Open-loop control by pulse train output/line-driver output, Number of control axes 1axis, No of Numbers allocated 1, Current Consumption (A) 5 V 0.25 : CJ1W-NC133
- CJ1 Special I/O Units, Position Control Unit, Control Method/Control output interface Open-loop  control by pulse train output/line driver output, Number of axes 2 axes, No of Numbers allocated 1, Current Consumption (A) 5 V 0.25  : CJ1W-NC233
- CJ1 Special I/O Units, Position Control Unit, Control Method/Control output interface Open-loop control by pulse trein output/line-driver output, Number of axes 4 axes, No of Numbers allocated 2, Current Consumption (A) 5 V 0.36  : CJ1W-NC433
-CJ1 Special I/O Units, Space Unit, Control Method/Control output interface The ambient operation temperature range can be increased to 0 to 55 C if the CJ1W-SP001 CJ-Series Space Unit is used  : CJ1W-SP001