Trainer sensor elektronik adalah set alat percobaan Sains yang berisi papan utama mikrokontroler, berbagai modul sensor, aktuator dan output dengan perangkat tampilan dan alat perangkat lunak. Mereka bekerja bersama untuk membuat konsep baru percobaan sains dan menambah pengalaman pemrograman untuk mengembangkan proyek sains utama.
Fitur
- Pelajari dan coba perilaku masing-masing sensor untuk memahami operasinya.
- Termasuk pengoperasian mikrokontroler BASIC Stamp2SX.
- Peserta didik dapat menerapkan semua pengetahuan untuk mengembangkan percobaan sains baru dengan cara yang berbeda.
- Sistem pengumpulan data menggunakan Perangkat Lunak DAQ.
- Eksperimen dapat memperoleh data dari sistem untuk dikumpulkan dan dikirim ke komputer untuk memproses atau memplot grafik.
- Kontrol perangkat aktuator seperti Relay, motor DC, motor Stepper, dll.
- Untuk membuat proyek kontrol otomatis, proyek sains modern.
PRODUCT MODULES
1. SMART SCIENCE EXPERIMENT BOARD
Operation compatible with BASIC Stamp2SXmodule (BS2SX-IC)
Use interpreter from Parallax
16 KByte memory for program and data
Plug on 24-pin DIP socket similar BS2SX-IC
2. 38KHz INFRARED MODULE
Detect modulated 38kHz carrier frequency infrared light 38KHz INFRARED MODULE
Detect modulated 38kHz carrier frequency infrared light
3. INFRARED DETECTOR
Detect the infrared light in analog (voltage) and digital signal by using Photo-transistor
4. INFRARED LED
Drive with logic HIGH TTL level 2-mode operations: Continuous drive
Frequency drive
5. LIGHT DETECTOR
Detect light density.
2 outputs: Positive and Negative voltage reaction when detect light
6. LIGHT REFLECTOR
Includes Super-bright Red LED as light source and LDR that receive reflection light. Output very following reflection light density.
7. LED INDICATOR
HIGH: Logic 1 apply,
LED lights Red.
LOW: Logic 0 apply,
LED lights Green.
If not: LED turns off
8. SOUND DETECTOR
Detect sound level changing event. Output is logic
9. SWITCH INPUT
HIGH: Logic 1 apply,
LED lights Red.
LOW: Logic 0 apply,
LED lights Green.
Not press: LED turns off
10. TEMPERATURE SENSOR
Measure temperature change by Thermistor.
2 outputs voltage: Positive and Negative co-efficiency
11. RESISTANCE MEASUREMENT
Measure resistance value
Output: 1mv/Ω
12. MAGNETIC FIELD SENSOR
Measure magnetic field density.
If no detect output: +2.5V
Sensitivity: 1.3mV/Gauss.
13. VERTICAL POTENTIOMETER
Type of variable resistor.
Adjustable: 0…5V
14. CURRENT MEASUREMENT
Measure DC current by series connection.
Output: 5 mV/mA.
Full Range is 1,000mA.
15. COMPARATOR
Compare apply voltage between ch-A and ch-B.
Output is logic 0 with indicator.
Vin (max) is 3.5Vdc
16. ATTENUATOR
Measure DC voltage.
2 attenuator ratios:
1:1 for 0 to +5V input
2:1 for 0 to +10V input
not use to measure SCi-BOX internal system
17. SLIDE VARIABLE RESISTOR
Type of variable
resistor
Adjustable: 0…5V
18. CAPACITANCE MEASUREMENT
Measure capacitance value in Farad unit by RC time constant operation.
19. DC MOTOR
Input: 6-12 VDC
20. STEPPER MOTOR
Input: 12 VDC
