AUTOMATION JAYA : FX3G-485-BD

Tampilkan postingan dengan label FX3G-485-BD. Tampilkan semua postingan

Rabu, 20 Maret 2019

FX3G-485-BD

Spesifications

Manufacturer: Mitsubishi Electric

RS-485 communication for function expansion board FX3G-485-BD
Transmission standard : RS-485 standard, conform to the RS-422 standard
Insulation method : Non-insulated (between the communication line and the CPU)
Transmission distance : Up to 50m
External device connection method : Europe terminal blocks
Communication system : Half-duplex bi-directional
Communication procedure : Non-procedural, computer link (dedicated protocol format 1, dedicated protocol format 4), parallel link, a simple PC-to-PC link, inverter communication
FX3G is compatible with the inverter communication later Ver.1.10.
communication speed No-protocol, the computer link : 300/600/1200/2400/4800/9600/19200/38400 (bps)
Parallel link : 115200 (bps)
Simple PC-to-PC link : 38400 (bps)
Inverter communication : 4800/9600/19200/38400 (bps)
Display (LED) : RD, SD
O occupied points : 0 points (no relation to the maximum input and output points of the sequencer)
Apply sequencer : FX3S, FX3G
FX3S when connected, can not be used in conjunction function expansion board and FX3S-CNV-ADP.
Ambient temperature : 0 ~ 55 °C ····· operation, -25 ~ 75 °C ····· during storage
Relative humidity : 5 ~ 95% RH (non-condensing) ...... operation
Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz : Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz : Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Direct mounting at the time Frequency: 10 ~ 57Hz : Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz : Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Impact : 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each
Anti-noise : Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator
Withstand voltage : Non-isolated between communication line and the PLC main unit
(Please do not withstand voltage test)
Insulation resistance : Non-isolated between communication line and the PLC main unit
(Please do not insulation resistance test)
Use atmosphere : Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly
Advanced use : 2,000m or less (can not be used under the pressurized environment to more than atmospheric pressure. There is a possibility of failure.)
Shipping Weight : 1 Kg

Rabu, 31 Januari 2018

Serial Communication : FX3U-232-BD,FX3U-485-BD,FX3G-485-BD,FX3G-232-BD,FX2NC-232ADP,FX2NC-485ADP,FX3U-232ADP-MB,FX3U-485ADP-MB

For related system and data transfer with external equipment and third party devices, serial communication has long been the established connection method. Serial communication allows the FX Series to connect both efficiently and reliably with other PLCs, sensor, printers, and modems, etc. Multi drop networks , non-protocol communication, and remote maintenance are just some of the many uses.

Modbus

Both an open network and a serial communicator, Modbus-RTU allows FX3 series PLCs to interface with a wide range of equipment and devices. Using RS-485 and RS-232, the FX3U-485ADP-MD and FX3U-232ADP-MB expand the networking capabilities of the FX system while still supporting general communication with other FX systems, non-protocol devices, and serial modems.

Modbus serial communication parameters and communication execution are setup easily within the ladder program using GX Works2 or GX Developer, and the FX Modbus Master uses the special ADPRW instruction to communicate with up to 16 Slave stations.

Serial Communication