Spesifications
- Manufacturer: Mitsubishi Electric
- FX3U-485ADP-MB
- Transmission standard: RS-485 standard, conform to the RS-422 standard
- Insulation method:Photocoupler
- Transmission distance: The total length 500m or less
(to the equipment to be connected FX2N-485-BD, FX1N- 485-BD, FX3U-485-BD, following the total length 50m if it contains a FX3G-485-BD) - External device connection method: Europe terminal block
- Communication system: Half-duplex bi-directional
- Communication procedure: . MODBUS (master or slave) - No-protocol communication, computer link (dedicated protocol format 1, dedicated protocol format 4), parallel link and simple PC-to-PC link inverter communication
- communication speed MODBUS communication: 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps)
corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012. (Serial number: 127 **** or later) - No-protocol, the computer link: 300/600/1200/2400/4800/9600/19200/38400 (Bps)
FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. - Parallel link: 115200 (bps)
- Simple PC-to-PC link: 38400 (bps)
- Inverter communication: 4800/9600/19200/38400 (Bps)
FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. - Display (LED): RD, SD, POWER
- O occupied points: 0 points (no relation to the maximum input and output points of the sequencer)
- Apply sequencer: [FX3S]
V1.00 and later: corresponding to all the communication function - [FX3G]
V1.00 and later: MODBUS, corresponding to the communication functions other than the inverter communication
V1.10 and later: inverter communication function to the corresponding
V1.30 and later: in MODBUS communication function correspondence - [FX3U]
V2.20 and later: communication functions other than the MODBUS communication to the corresponding
V2.40 and later: corresponds to the MODBUS communication function - [FX3GC]
V1.40 and later: corresponding to all the communication function - [FX3UC]
V1.00 and later: MODBUS communication communication function to the corresponding non-
V2.40 and later: corresponds to the MODBUS communication function. - connection to FX3S is required FX3S-CNV-ADP.
- Connection to the FX3G is required FX3G-CNV-ADP.
- FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board.
- mass: 0.08kg
- Power Specifications:
- Power supply: DC5V 20mA (internal power supply from the sequencer)
- Ambient temperature: 0 ~ 55 °C ..... operation, -25 ~ 75 °C ..... during storage
- Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation
- Vibration resistance When the DIN rail mounting : Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
- When the DIN rail mounting : Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
- Direct mounting at the time : Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
- Direct mounting at the time : Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
- Impact: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each
- Anti-noise: Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator
- Withstand voltage: External terminals and between the PLC main unit of the ground terminal: AC500V 1 minute
- Insulation resistance: External terminals and between the PLC main unit of the ground terminal: DC500V 5MΩ more in insulation resistance tester
- Use atmosphere: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly
- Advanced use: 2000m or less can not be used in the pressurized environment to more than atmospheric pressure.
- There is a possibility of failure.
- Shipping Weight : 1 Kg
