Servo Amplifier MITSUBISHI MR-J2S-350B
Spesification
Voltage, Frequency
|
Single phase AC 200 ~ 230V / 50, 60Hz
| |
Allowable voltage fluctuation
|
Single phase AC170 ~ 253V
| |
Allowable frequency variation
|
Within ± 5%
| |
Input (W)
|
50
| |
Main circuit power
|
Voltage, Frequency (Note 1)
|
Three phase AC 200 ~ 230V / 50, 60Hz (Note 2)
|
Allowable voltage fluctuation
|
Three phase AC 200 to 230 V: Three phase AC 170 to 253 V
| |
Allowable frequency variation
|
Within ± 5%
| |
Power supply capacity
| ||
Inrush current
| ||
Control method
|
Sinusoidal PWM control · Current control method
| |
Dynamic brake
|
Built-in (Note 3)
| |
Protection function
|
Over current shutdown , regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, detector fault protection, regeneration fault protection, undervoltage, instantaneous power failure protection, overspeed protection,
| |
Maximum command input during position control
|
Equivalent to 10Mpps
| |
rescue
|
Forced cooling , open (IP00)
| |
Environment
|
Main Temperature
|
0 to 55 ° C (not to be frozen), Storage: -20 to 65 ° C (not to be frozen)
|
Weekly humidity
|
90% RH or less (No condensation), Conservation: 90% RH or less (No condensation)
| |
atmosphere
|
Indoors (no direct sunlight), corrosive gas, flammable gas, oil mist, dust free
| |
Elevation / Vibration
|
Less than 1000m above sea level / 5.9m / s2 or below
| |
Weight (kg)
|
2.0
| |
