Brand: MITSUBISHI
Name: Platinum resistance type temperature input module
Model: Q68RD3-G
8 channels.
Platinum thermal resistance (Pt100, JPt100).
Nickel thermal resistance (Ni100).
Shedding detection function.
Conversion speed: 320ms/8 channel.
Inter channel isolation.
40 pin connector.
Most suitable for process control of isolated analog modules.
Temperature data can be collected by connecting thermocouple / thermal resistance.
Products can choose multi-channel (8 channel) input type and channel isolation type.
Customers can choose the most suitable model according to the intended use.
Reduce system downtime recovery time.
With a simple operation, you can back up all the data in the CPU to the memory card.
Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.
In the event of a CPU failure, after the replacement of CPU, can be a simple operation,
Restore the system by using the data storage card in advance.
Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown.
Auto backup key data
Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,
To prevent the loss of the program and the parameters due to forgetting to replace the battery.
In addition, the soft component data and other important data can be backed up to the standard ROM,
In order to avoid during the long holiday and other planned downtime,
The data is lost due to battery depletion.
The next time the power is turned on, the backup data will be automatically restored.
1 channels.
Input (weighing sensor output): V/V 0.0~3.3m.
Output (resolution): 0~10000.
Conversion speed: 10ms.
18 point terminal.
Weighing sensor input module capable of directly connecting with all kinds of weighing sensor.
The weighing sensor can now be directly connected to a programmable controller system,
Without the need for an external connection to the signal converter, etc MITSUBISHI Q68RD3-G
By ensuring the accuracy of the weighing sensor, stable data conversion speed,
To achieve a high precision measurement.
No external signal converter!
The weighing sensor input module is directly connected to the programmable controller, which can reduce the time and cost of the sensor!
Various types of weighing sensors can be connected with the magnetostrictive type, capacitive type, rotary instrument or strain gauge MITSUBISHI Q68RD3-G.
Can connect 6 wire system (combined with remote sensing technology and ratio method) or 4 wire system weighing sensor. GI-62.5/125 optical cable.
Double ring.
PLC to PLC network (control station / common station) / remote I/O net (remote master station).SD memory card 8GB.
Can be used on the Q24DHCPCPU-V MITSUBISHI Q68RD3-G.
Can be used on the Q24DHCPCPU-LS.
Can be used on the QnUDVCPU.ABS serial synchronous encoder input can be used: 2 sets of modules / units.
Position detection method: compiled on value (ABS) method.
Transmission mode: serial communication.
Allows you to track target input points: 2.
Automatically transfer the record file to the FTP server
Simply by recording the configuration tool to carry out a simple setup,
A data record file stored on the SD memory card can be sent to the FTP server MITSUBISHI Platinum resistance type temperature input module MITSUBISHI Platinum resistance type temperature input module.
Because the record server can handle multiple files, it can reduce the task of management and maintenance.
When a failure occurs, it can quickly respond to.
Simply extract the data associated with the problem, do not have to spend a lot of time to filter a large number of diagnostic data,
So it can quickly determine the cause of the failure, and make the solution MITSUBISHI Platinum resistance type temperature input module. 5 slots.
The main substrate needs to be equipped with CPU and power supply.
Requires 1 power modules.
Used to install Q series modules.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a variety of tyypes of I/O, analog and positioning function module Q68RD3-G.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of thhe positioning of the industry, the control needs of various fields MITSUBISHI Q68RD3-G.
Can also be used in combination with the CPU module to achieve appropriate control.
