HMI Omron NB Seri

Programmable Terminals

Product name	Specifications	Model
NB3Q	3.5 inch, TFT LCD, Color, 320 × 240 dots	NB3Q-TW00B
	3.5 inch, TFT LCD, Color, 320 × 240 dots, USB Host, Ethernet	NB3Q-TW01B
NB5Q	5.6 inch, TFT LCD, Color, 320 × 234 dots	NB5Q-TW00B
	5.6 inch, TFT LCD, Color, 320 × 234 dots, USB Host, Ethernet	NB5Q-TW01B
NB7W	7 inch, TFT LCD, Color, 800 × 480 dots	NB7W-TW00B
	7 inch, TFT LCD, Color, 800 × 480 dots, USB Host, Ethernet	NB7W-TW01B
NB10W	10.1 inch, TFT LCD, Color, 800 × 480 dots, USB Host, Ethernet	NB10W-TW01B

Options

Product name	Specifications	Model
Software	Supported Operating Systems:  Windows 8, Windows 7, Windows Vista®, Windows XP (SP3 or higher).  Note: Except for Windows XP 64-bit version  Download from Omron's regional websites.	NB-Designer *
NB-to-PLC Connecting cable	For NB to PLC via RS-232C (CP/CJ/CS), 2m	XW2Z-200T
	For NB to PLC via RS-232C (CP/CJ/CS), 5m	XW2Z-500T
	For NB to PLC via RS-422A/485, 2m	NB-RSEXT-2M
Display protective sheets	For the NB3Q contains 5 sheets	NB3Q-KBA04
	For the NB5Q contains 5 sheets	NB5Q-KBA04
	For the NB7W contains 5 sheets	NB7W-KBA04
	For the NB10W contains 5 sheets	NB10W-KBA04
Attachment	Mounting bracket for NT31/NT31C series to NB5Q series	NB5Q-ATT01

Note: Use a standard USB cable (Type A male to Type B male) or standard Ethernet cable (10 BASE-T/100 BASE-TX twisted-pair cable) to  connect the NB series to software (personal computer). 
        Use a standard Ethernet cable (10 BASE-T/100 BASE-TX twisted-pair cable) to connect the NB series to a PLC. For detail, refer to the NB Series Setup Manual (Cat. No. V107). 
* The NB5Q-TW01B and NB7W-TW01B are supported by NB-Designer version 1.10 or higher. 
* The NB3Q-TW0[]B and NB10W-TW01B are supported by NB-Designer version 1.20 or higher.

System Configuration

Items	Specifications
Operating System (OS)	Microsoft Windows XP (SP3 or higher)  Microsoft Windows Vista (32-bit or 64-bit edition)  Microsoft Windows 7 (32-bit or 64-bit edition)  Microsoft Windows 8 (32-bit or 64-bit edition)
CPU	Windows computers with CPU recommended for OS
Memory	512 MB or more
Hard Disk	2.5 GB or more, with the disk space more than 800 MB at least
Display	Supports the display with resolution of 800x600 and 16-bit high color  (1024x768 and 32-bit true color are recommended.) .
Communication ports	RS-232C Port, USB Port, Ethernet Port

Recommended USB Memory

Product name	Specifications	Model
USB memory stick	Capacity: 2 GB	FZ-MEM2G
	Capacity: 8 GB	FZ-MEM8G

NB Series

Quality color display with LED backlighting. Complete HMI family. Comprehensive features.

with comprehensive features

Best-in-class display

The robust TFT, color touch LCD gives excellent visibility and features long-life (50,000 hours) LED backlighting. Screen sizes range from 3.5 to 10 inches. 

 • LED backlighted TFT LCD 
 • Wide viewing angle 
 • More than 65,000 display colors 
 • Stores up to 120 MBs of screen data

Smart design

When developing the NB series, we considered every aspect of the design to give you maximum flexibility. A typical example is the portrait or landscape display mode. 

 • Portrait or landscape display mode 
 • Connection to Omron and non-Omron devices, e.g. PLCs/inverters 
 • Serial, USB or Ethernet connectivity 
 • PictBridge printer connection

Saves you time

The NB series has many useful features that will make it easy to create and maintain your projects, such as the USB memory stick support. 

• USB memory stick support 
 • Animations and easy-to-use functions 
 • Multi-language support and tool 
 • On/off-line simulation

Turn your idea into an application… exactly how you want it!

The NB series gives you all the features and functionality to easily create intuitive operator screens really quickly. Features such as window handling give you many screen-creation possibilities, while texts can be defined in up to 32 languages. Furthermore, off-line simulation enables you to quickly test your project.

Flexible window handling

Your scope to create screens for your project using the familiar window concept was never greater than with the NB series. Three standard windows maximize your creative freedom: 
 1) Basic for general or pop-up screens, 
 2) Common for fixed or template screens and 
 3) Fast Selection for menu screens. 
Besides the standard window, you can also show ‘window-inwindow’ using the indirect window component. And you can manage pop-up windows using the direct window component. Furthermore, the NB series also supports bottom windows and transparency for pop-up windows.

Extensive language support

Currently supporting 32 languages, you will find it easy to manage texts with the NB series. Thanks to the Text Library function, you can store the texts used many times in a project. Similarly, you can also store the text for a component supporting multiple states (ON/OFF), using a text for each state. And you can do this together with the font setting for each language.

Easy animation

The NB series gives you many possibilities to create animations easily and quickly. Moving components can be created easily and in many ways. For example, you may want to show a different status with text and graphics, or showing free or trajectory movement while changing the displayed graphic. All of this can be done by simply configuring the status, X/Y coordinates and corresponding address.

Powerful Macros

Thanks to its powerful macros, the NB series also allows you to do even more, such as perform calculations and comparisons or iterations, and mathematical functions. It also enables you to draw graphics and patterns on the NB screen, as well as writing / reading a value from or to the local memory and the memory of a connected device.

The logical choice for your machine

The feature-rich NB series has everything you will need for creating applications for a wide range machines and in many industries, for example, packaging, food, plastics and textiles. From a simple lid placing or loading/unloading machine right up to an in-line filling or sealing /labeling packaging machine. And last but not least, Omron's latest NB-Designer software can be downloaded free of charge and at any time from our website.

Always informed about alarms

Event monitoring (alarming) is both flexible and easy to use. Not only do you have the possibility to enter bit and word alarms for on/off or on-condition triggering, there is also the possibility to use different fonts and color to indicate varying degrees of status and priorities. Specific alarms are indicated with an audible buzzer sound, as well as by an accompanying text message, and you can even create pop-up alarms for situations where immediate action has to be taken.

Easy data presentation

Graphical representation of real-time and historical data is easy with the NB series. As well as display of time sampling and trending data, you have the option to save sampling data (max. 16 consecutive words) of basic real-time trending data. And you can plot using x/y coordinates, in which case sampling can be done via single or multiple points and with historical data. Furthermore, data can be presented in a variety of ways, such as sampling points using x and y components.

Multiple security options

Protecting your developed project with a password using the NB series is both a simple and secure matter. Among the comprehensive security options is the possibility to define up to 16 minimum security levels on screens, buttons and inputs, and you can set up to 32 specific permission controls for each operator. There is also a register condition (bit/word) control for a check of actual condition against a predefined value, and a standard operator confirmation check to confirm that critical actions have been performed by the operator.

Direct connection with safety

The NB series can be directly connected to Omron’s G9SP Safety Controller via RS-232C serial communications. Direct connection allows you to easily monitor details of errors that occur in the G9SP series and operation status, which contributes to reduce machine downtime. Now you do not need to create the program that was previously required for data exchange between the G9SP and HMI through PLC.

The perfect partner for CP1

With its large range of screen sizes, ample specifications, rich functionality and proven Omron high quality, the new NB series has everything you need in a compact HMI to accompany Omron’s popular CP1 Compact Machine Controller range. The CP1 offers increasing degrees of sophistication to perfectly match your specific automation requirement and connection to the NB series is possible via Serial or Ethernet. Similarly, data transfer of recipes between HMI and PLC (with data back-up to external memory if required) is easy and the recipe screen format is freely selectable, or can be a standard table if preferred.

Dimensi Ukuran CP1H

CPU Units

CP1H CPU Units (X/XA/Y Types)

Expansion Units and Expansion I/O Units

CP1W-20ED[][], CP1W-16E[][],
CP1W-AD04[], CP1W-DA021/04[],
CP1W-MAD[][], CP1W-TS[][]1/[][]2/[][]3

CP1W-8E[][]
CP1W-SRT21

CP1W-40ED[]
CP1W-32E[][]
CP1W-TS004

CJ-series Special I/O Units and CPU Bus Units

Note: It takes an example about the size.

CJ Unit Adaptor

CP1W-EXT01

CP1H

Example: Two CJ-series Units (31-mm widths) Connected Using a CJ Unit Adapter

Spesifikasi CP1H

General Specifications

Type	AC power supply models	DC power supply models
Model	CP1H-[][][]-A	CP1H-[][][]-D
Power supply	100 to 240 VAC 50/60 Hz	24 VDC
Operating voltage range	85 264 VAC	20.4 to 26.4 VDC  (with 4 or more Expansion Units and  Expansion I/O Units: 21.6 to 26.4 VDC)
Power consumption	100 VA max. (CP1H-[][][]-A)	50 W max. (CP1H-[][][]-D)
Inrush current *	100 to 120 VAC inputs:  20 A max. (for cold start at room  temperature)  8 ms max.  200 to 240 VAC inputs:  40 A max. (for cold start at room  temperature),  8 ms max.	30 A max. (for cold start at room  temperature)  20 ms max.
External power supply	300 mA at 24 VDC	None
Insulation resistance	20 MΩ min. (at 500 VDC) between the  external AC terminals and GR terminals	No insulation between primary and secondary  for DC power supply
Dielectric strength	2,300 VAC at 50/60 Hz for 1 min between  the external AC and GR terminals, leakage  current: 5 mA max.	No insulation between primary and secondary  for DC power supply
Noise immunity	Conforms to IEC 61000-4-4. 2 kV (power supply line)
Vibration resistance	Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz,  acceleration: 9.8 m/s2 in X, Y, and Z directions for 80 minutes each. Sweep time:  8 minutes × 10 sweeps = total time of 80 minutes)
Shock resistance	Conforms to JIS C60068-2-27. 147 m/s2 three times each in X, Y, and Z directions
Ambient operating  temperature	0 to 55°C
Ambient humidity	10% to 90% (with no condensation)
Ambient operating  environment	No corrosive gas
Ambient storage  temperature	-20 to 75°C (Excluding battery.)
Power holding time	10 ms min.	2 ms min.

Note: The above values are for a cold start at room temperature for an AC power supply, and for a cold start for a DC 
          power supply. 
          • A thermistor (with low-temperature current suppression characteristics) is used in the inrush current control 
              circuitry for the AC power supply. The thermistor will not be sufficiently cooled if the ambient temperature is 
              high or if a hot start is performed when the power supply has been OFF for only a short time. In those cases 
              the inrush current values may be higher (as much as two times higher) than those shown above. Always allow 
              for this when selecting fuses and breakers for external circuits. 
          • A capacitor charge-type delay circuit is used in the inrush current control circuitry for the DC power supply. The 
              capacitor will not be charged if a hot start is performed when the power supply has been OFF for only a short 
              time, so in those cases the inrush current values may be higher (as much as two times higher) than those 
              shown above.

Performance Specifications

Type		CP1H-XA  CPU Units	CP1H-X  CPU Units	CP1H-Y CPU Units
Models		CP1H-XA[][][]-[]	CP1H-X[][][]-[]	CP1H-Y[][][]-[]
Control method		Stored program method
I/O control method		Cyclic scan with immediate refreshing
Program language		Ladder diagram
Function blocks		Maximum number of function block definitions: 128 Maximum number of instances: 256  Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length		1 to 7 steps per instruction
Instructions		Approx. 500 (function codes: 3 digits)
Instruction execution time		Basic instructions: 0.10 μs min. Special instructions: 0.15 μs min.
Common processing time		0.7 ms
Program capacity		20K steps
Number of tasks		288 (32 cyclic tasks and 256 interrupt tasks)
	Scheduled  interrupt tasks	1 (interrupt task No. 2, fixed)
	Input interrupt  tasks	8 (interrupt task No. 140 to 147, fixed)		6 (interrupt task No. 140 to 145, fixed)
		(Interrupt tasks can also be specified and executed for high-speed counter interrupts.)
Maximum subroutine  number		256
Maximum jump number		256
I/O areas  *	Input bits	272bits (17 words): CIO 0.00 to 16.15
	Output bits	272bits (17 words): CIO 100.00 to 116.16
	Built-in Analog Inputs	CIO 200 to CIO 203	---
	Built-in Analog Outputs	CIO 210 to CIO 211	---
	Serial PLC  Link Area	1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)
Work bits		8,192 bits (512 words): W0.00 to W511.15 (W0 to W511)  CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143)
TR Area		16 bits: TR0 to TR15
Holding Area		8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)
AR Area		Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447)  Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
Timers		4,096 bits: T0 to T4095
Counters		4,096 bits: C0 to C4095
DM Area		32 Kwords: D0 to D32767
Data Register Area		16 registers (16 bits): DR0 to DR15
Index Register Area		16 registers (32 bits): IR0 to IR15
Task Flag Area		32 flags (32 bits): TK0000 to TK0031
Trace Memory		4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)
Memory Cassette		A special Memory Cassette (CP1W-ME05M) can be mounted.  Note: Can be used for program backups and auto-booting.
Clock function		Supported. Accuracy (monthly deviation):  -4.5 min to -0.5 min (ambient temperature: 55°C),  -2.0 min to +2.0 min (ambient temperature: 25°C),  -2.5 min to +1.5 min (ambient temperature: 0°C)
Communications functions		One built-in peripheral port (USB 1.1): For connecting Support Software only.
		A maximum of two Serial Communications Option Boards can be mounted.
		A maximum of two Ethernet Option Boards can be mounted. When using CP1W-CIF41  Ver.1.0, one Ethernet Option Board can be mounted.
Memory backup		Flash memory: User programs, parameters (such as the PLC Setup), comment data,  and the entire DM Area can be saved to flash memory as initial values.  Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery.
Battery service life		5 years at 25°C. (Use the replacement battery within two years of manufacture.)
Built-in input terminals		40 (24 inputs, 16 outputs)		20 (12 inputs, 8 outputs)  Line-driver inputs: Two axes for phases A,  B, and Z  Line-driver outputs: Two axes for CW and  CCW
Number of connectable  Expansion (I/O) Units		CP Expansion I/O Units: 7 max.; CJ-series Special I/O Units or CPU Bus Units: 2 max.
Max. number of I/O points		320 (40 built in + 40 per Expansion (I/O)  Unit × 7 Units)		300 (20 built in + 40 per Expansion (I/O)  Unit × 7 Units)
Interrupt inputs		8 inputs (Shared by the external interrupt  inputs (counter mode) and the quick-  response inputs.)		6 inputs (Shared by the external interrupt  inputs (counter mode) and the quick-  response inputs.)
Interrupt input counter  mode		8 inputs (Response frequency: 5 kHz  max. for all interrupt inputs), 16 bits  Up or down counters		6 inputs (Response frequency: 5 kHz max.  for all interrupt inputs), 16 bits  Up or down counters
Quick-response inputs		8 points (Min. input pulse width: 50 μs max.)		6 points (Min. input pulse width: 50 μs max.)
Scheduled interrupts		1
High-speed counters		4 inputs:  Differential phases (4x), 50 kHz or  Single-phase (pulse plus direction, up/  down, increment), 100 kHz  Value range: 32 bits, Linear mode or ring  mode  Interrupts: Target value comparison or  range comparison		2 inputs:  Differential phases (4x), 500 kHz or Single-  phase, 1 MHz and  2 inputs:  Differential phases (4x), 50 kHz or Single-  phase (pulse plus direction, up/down,  increment), 100 kHz  Value range: 32 bits, Linear mode or ring  mode  Interrupts: Target value comparison or  range comparison
Pulse  outputs  (models  with  transistor outputs  only)	Pulse outputs	Trapezoidal or S-curve acceleration and  deceleration (Duty ratio: 50% fixed)  4 outputs, 1 Hz to 100 kHz (CCW/CW or  pulse plus direction)		Trapezoidal or S-curve acceleration and  deceleration (Duty ratio: 50% fixed)  2 outputs, 1 Hz to 1 MHz (CCW/CW or pulse  plus direction)  2 outputs, 1 Hz to 100 kHz (CCW/CW or  pulse plus direction)
	PWM outputs	Duty ratio: 0.0% to 100.0% (Unit: 0.1%)  2 outputs, 0.1 to 6553.5 Hz (Accuracy: ±5% at 1 kHz)
Built-in analog I/O terminals		4 analog inputs and  2 analog outputs	None
Analog control		1 (Setting range: 0 to 255)
External analog input		1 input (Resolution: 1/256, Input range: 0 to 10 V), not isolated

Note: The memory areas for CJ-series Special I/O Units and CPU Bus Units are allocated at the same as for the CJ-series. For details, refer to the CJ Series catalog (Cat. No. P052).