CJ-series Input Units CJ1W-ID / IA

A wide range of CJ series input units are available featuring high-speed input and suitability for various applications. This unit is available for CJ/NJ controllers.

Features  CJ1W-ID / IA

High-speed input models are available, meeting versatile applications.
ON Response Time: 15μs, OFF Response Time: 90μs

Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs.

The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. *1

A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise.

Either a Fujitsu or MIL connector interface can be used. *2

Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices.

*1. The same polarity is used for the same common. 
*2. For models with 32 or 64 inputs.

International Standards

• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Input Units

Unit  type	Product name	Specifications					Current  consump-  tion (A)		Model	Stand-  ards
		I/O  points	Input  voltage  and  current	Commons	External  con-  nection	No. of  words  allo-  cated	5 V	24 V
CJ1  Basic I/O  Units	DC  Input  Units	8 inputs	12 to  24 VDC,  10 mA	Independent contacts	Removable  terminal  block	1 word	0.09	---	CJ1W-ID201	UC1,  N, L,  CE
		16 inputs	24 VDC,  7 mA	16 points,  1 common	Removable  terminal  block	1 word	0.08	---	CJ1W-ID211
		16 inputs (High  speed)	24 VDC,  7 mA	16 points,  1 common	Removable  terminal  block	1 word	0.13	---	CJ1W-ID212	N, L,  CE
		32 inputs	24 VDC,  4.1 mA	16 points,  1 common	Fujitsu  connector	2 words	0.09	---	CJ1W-ID231	UC1,  N, L,  CE
		32 inputs	24 VDC,  4.1 mA	16 points,  1 common	MIL  connector	2 words	0.09	---	CJ1W-ID232
		32 inputs (High  speed)	24 VDC,  4.1 mA	16 points,  1 common	MIL  connector	2 words	0.20	---	CJ1W-ID233	N, L,  CE
		64 inputs	24 VDC,  4.1 mA	16 points,  1 common	Fujitsu  connector	4 words	0.09	---	CJ1W-ID261	UC1,  N, L,  CE
		64 inputs	24 VDC,  4.1 mA	16 points,  1 common	MIL  connector	4 words	0.09	---	CJ1W-ID262
	AC  Input  Units	8 inputs	200 to 24  VAC, 10 mA (200 V,  50 Hz)	8 points,  1 common	Removable  terminal  block	1 words	0.08	---	CJ1W-IA201
		16 inputs	100 to 120  VAC, 7 mA  (100 V,  50 Hz)	16 points,  1 common	Removable  terminal  block	1 words	0.09	---	CJ1W-IA111

Accessories

Connectors are not included for models with connectors. Either use one of the applicable connector listed below or use an applicable Connector-Terminal Block Conversion Unit or I/O Relay Terminal. For details on wiring methods, refer to Data Sheet.

Applicable Connectors

Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units

Name	Con-  nection	Remarks		Applicable Units	Model	Stand-  ards
40-pin  Con-  nectors	Soldered	FCN-361J040-AU	Connector	Fujitsu Connectors:  CJ1W-ID231(32 inputs): 1 per Unit  CJ1W-ID261 (64 inputs): 2 per Unit  CJ1W-OD231 (32 outputs):1 per Unit  CJ1W-OD261 (64 outputs): 2 per Unit  CJ1W-MD261 (32 inputs, 32 outputs):  2 per Unit	C500-CE404	---
		FCN-360C040-J2	Connector  Cover
	Crimped	FCN-363J040	Housing		C500-CE405
		FCN-363J-AU	Contactor
		FCN-360C040-J2	Connector  Cover
	Pressure  welded	FCN-367J040-AU/F			C500-CE403
24-pin  Con-  nectors	Soldered	FCN-361J024-AU	Connector	Fujitsu Connectors:  CJ1W-MD231 (16 inputs, 16 outputs):  2 per Unit	C500-CE241
		FCN-360C024-J2	Connector  Cover
	Crimped	FCN-363J024	Socket		C500-CE242
		FCN-363J-AU	Contactor
		FCN-360C024-J2	Connector  Cover
	Pressure  welded	FCN-367J024-AU/F			C500-CE243

MIL Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units

Name	Con-  nection	Remarks	Applicable Units	Model	Stand-  ards
40-pin  Con-  nectors	Pressure  welded	FRC5-AO40-3TOS	MIL Connectors:  CJ1W-ID232/233 (32 inputs): 1 per Unit  CJ1W-OD232/233/234 (32 outputs):1 per Unit  CJ1W-ID262 (64 inputs): 2 per Unit  CJ1W-OD262/263 (64 outputs): 2 per Unit  CJ1W-MD263/563 (32 inputs, 32 outputs):  2 per Unit	XG4M-4030-T	---
	Crimped	-		XG5N-401 *
20-pin  Con-  nectors	Pressure  welded	FRC5-AO20-3TOS	MIL Connectors:  CJ1W-MD232/233 (16 inputs, 16 outputs):  2 per Unit	XG4M-2030-T	---
	Crimped	-		XG5N-201 *

* Crimp Contacts are also required. Refer to Data Sheet for details.

Applicable Connector-Terminal Block Conversion Units

Type	Se-  ries	I/O	Num- ber  of  poles	Wiring  method	Ter-  minal  type	Size	Mount- ing	Common  terminals	I/O Units	Model	Stand- ards
								Bleeder  resistance
								Indicators
PLCs	XW2R	Out- put	34	Phillips  screw	M3	Refer to  Data Sheet		No	CJ1W-ID231  CJ1W-ID261	XW2R-J34GD-C1	---
									CJ1W-ID232  CJ1W-ID233  CJ1W-ID262	XW2R-J34GD-C2
				Slotted  screw  (rise up)	M3  (Euro- pean  type)				CJ1W-ID231  CJ1W-ID261	XW2R-E34GD-C1
									CJ1W-ID232  CJ1W-ID233  CJ1W-ID262	XW2R-E34GD-C2
				Push-in  spring	Clamp				CJ1W-ID231  CJ1W-ID261	XW2R-P34GD-C1
									CJ1W-ID232  CJ1W-ID233  CJ1W-ID262	XW2R-P34GD-C2

Note: For the combination of Input Units with Connector-Terminal Block Conversion Units, refer to 2. Connecting 
          Connector-Terminal Block Conversion Units.

Applicable I/O Relay Terminals

Type	Series		Specifications							Size  (hori-  zontal  mount- ing)	Mount- ing	Model	Stand-ards
			Classification		Po-  larity	Number of  points	Rated ON  cur-  rent  at  con-  tacts	Oper-  ation  indi-  cators	Ter-  minal  block  for  power  supply wiring
Space-  saving	G70D	Verti-  cal  type  G70D- V	Out- puts	Relay  outputs	NPN	16  (SPST-  NO x 16)	5A or  3A	Yes	Ex-  pand-  able	Refer to  Data Sheet		G70D-VSOC16	U, C,  CE
				MOSFET relay  outputs			0.3A					G70D-VFOM16
		Flat  type  G70D		Relay  outputs	NPN	8  (SPST-  NO x 8)	5A	Yes	---			G70D-SOC08	---
						16  (SPST-  NO x 16)	3A					G70D-SOC16	---
					PNP	16  (SPST-  NO x 16)	3A					G70D-SOC16-1
				MOSFET relay  outputs	NPN	16  (SPST-  NO x 16)	0.3A					G70D-FOM16	---
					PNP							G70D-FOM16-1
High-  capacity, space-  saving	G70R		Out- puts	Relay  outputs	NPN	8  (SPST-  NO x 8)	10A	Yes	---			G70R-SOC08	---
Standard	G7TC		In-  puts	AC  inputs	NPN	16  (SPST-  NO x 16)	1A	Yes	---			G7TC-IA16	U, C
				DC  inputs								G7TC-ID16
			Out- puts	Relay  outputs	NPN	8  (SPST-  NO x 8)	5A					G7TC-OC08
						16  (SPST-  NO x 16)						G7TC-OC16
					PNP	16  (SPST-  NO x 16)						G7TC-OC16-1	---
High-  capacity  socket	G70A  (Socket only)		Out- puts	Relay  outputs	NPN	16  (SPDT  × 16  possible with  G2R  Relays)	10 A  (Ter-  mi-  nal  block  allow- able  cur-  rent)	No	---			G70A-ZOC16-3  (Socket only) +  Relay/SSR/  MOSFET  Relay/Timer	U, C,  CE
					PNP							G70A-ZOC16-4  (Socket only) +  Relay/SSR/  MOSFET  Relay/Timer

Note: For the combination of Input Units with I/O Relay Terminal and Connecting Cables, refer to 3. Connecting I/O 
          Relay Terminals.

Dimensi Ukuran CJ1W-PA205R, CJ1W-PA205C ,CJ1W-PA202, CJ1W-PD025, CJ1W-PD022

CJ1W-PA205R

CJ1W-PA205C

CJ1W-PA202

CJ1W-PD025

CJ1W-PD022

CJ1> Power Supply Units> CJ1W-PA / PD

last update: September 24, 2012

Item	Specifications
Model	CJ1W-PA205R	CJ1W-PA205C	CJ1W-PA202
Supply voltage	100 to 240 V AC (wide-range), 50/60 Hz
Operating voltage and frequency ranges	85 to 264 V AC, 47 to 63 Hz
Power consumption	100 VA max.		50 VA max.
Inrush current *1	At 100 to 120 V AC: 15 A/8 ms max. for cold start at room temperature At 200 to 240 V AC: 30 A/8 ms max. for cold start at room temperature		At 100 to 120 V AC: 20 A/8 ms max. for cold start at room temperature At 200 to 240 V AC: 40 A/8 ms max. for cold start at room temperature
Output capacity *7	5.0 A, 5 V DC (including supply to CPU Unit)		2.8 A, 5 V DC (including supply to CPU Unit)
	0.8 A, 24 V DC		0.4 A, 24 V DC
	Total: 25 W max.		Total: 14 W max.
Output terminal (service supply)	Not provided.
RUN output *2	Contact configuration: SPST-NO Switch capacity: 250 V AC, 2 A (resistive load) 120 V AC, 0.5 A (inductive load), 24 V DC, 2A (resistive load) 24 V DC, 2 A (inductive load)	Not provided.
Replacement notification function	Not provided.	With Alarm output (open-collector output) 30 V DC max., 50 mA max.	Not provided.
Insulation resistance	20 MΩ min. (at 500 V DC) between AC external and GR terminals *3	20 MΩ min. (at 500 V DC) between all external terminals and GR terminal *3, and between all alarm output terminals. 20 MΩ 1 min. (at 250 V DC) between all alarm output terminals and GR terminal *3.	20 MΩ min. (at 500 V DC) between AC external and GR terminals *3
Dielectric strength *4	2,300 V AC 50/60 Hz for 1 min between AC external and GR terminals *3 Leakage current: 10 mA max.	2,300 VAC, 50/60 Hz for 1 min between all external terminals and GR terminal *3 and between all alarm output terminals with a leakage current of 10 mA max. 1,000 V AC, 50/60 Hz for 1 min between all alarm output terminals and GR terminal *3 with a leakage current of 10 mA max.	2,300 V AC 50/60 Hz for 1 min between AC external and GR terminals *3 Leakage current: 10 mA max.
	1,000 V AC, 50/60 Hz for 1 minute between DC external and GR terminals *3 Leakage current: 10 mA max.
Noise immunity	2 kV on power supply line (conforming to IEC61000-4-4)
Vibration resistance	Conforms to IEC60068-2-6 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min)
Shock resistance	Conforms to IEC60068-2-27 147 m/s2, 3 times in X, Y, and Z directions (100 m/s2 for Relay Output Units)
Ambient operating temperature	0 to 55 ° C
Ambient operating humidity	10% to 90% (with no condensation)	10% to 90% (with no condensation) *5	10% to 90% (with no condensation)
Atmosphere	Must be free from corrosive gases.
Ambient storage temperature	- 20 to 70 ° C (excluding battery)	- 20 to 75 ° C *5	- 20 to 75 ° C (excluding battery)
Grounding	Less than 100 Ω
Enclosure	Mounted in a panel.
Weight	All models are each 5 kg max.
CPU Rack dimensions	90.7 to 466.7 × 90 × 65 mm (W × H × D) (not including cables) Note: W = a + b + 20 × n + 31 × m + 14.7 a: Power Supply Unit: PA205R and PA205C = 80; PA202 = 45; PD025 = 60; PD022=27 b: CPU Unit: CJ1-H or CJ1 = 62; CJ1M-CPU1[] = 31; CJ1M-CPU2[] = 49 The total width is given by the following: W = 156.7 + n × 20 + m × 31, where n is the number of 32-point I/O Units or I/O Control Units and m is the number of other Units.
Safety measures	Conforms to cULus and EC Directives.

Item Power Supply Unit	Specifications
	CJ1W-PD025	CJ1W-PD022
Supply voltage	24 VDC
Operating voltage and frequency ranges	19.2 to 28.8 V DC	21.6 to 26.4 V DC
Power consumption	50 W max.	35 W max.
Inrush current *1	At 24 V DC: 30 A/20 ms max. for cold start
Output capacity *7	5.0 A, 5 V DC (including supply to CPU Unit)	2.0 A, 5 V DC (including supply to CPU Unit)
	0.8 A, 24 V DC	0.4 A, 24 V DC
	Total: 25 W max.	Total: 19.6 W max.
Output terminal (service supply)	Not provided.
RUN output *2	Not provided.
Replacement notification function	Not provided.
Insulation resistance	20 MΩ min. (at 500 V DC) between DC external and GR terminals *3	--- *6
Dielectric strength *4	1,000 V AC, 50/60 Hz for 1 min between DC external and GR terminals *3 Leakage current: 10 mA max.	--- *6
Noise immunity	2 kV on power supply line (conforming to IEC61000-4-4)
Vibration resistance	Conforms to IEC60068-2-6 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min)
Shock resistance	Conforms to IEC60068-2-27 147 m/s2, 3 times in X, Y, and Z directions (100 m/s2 for Relay Output Units)
Ambient operating temperature	0 to 55 ° C
Ambient operating humidity	10% to 90% (with no condensation)
Atmosphere	Must be free from corrosive gases.
Ambient storage temperature	- 20 to 75 ° C (excluding battery)
Grounding	Less than 100 Ω
Enclosure	Mounted in a panel.
Weight	All models are each 5 kg max.
CPU Rack dimensions	90.7 to 466.7 × 90 × 65 mm (W × H × D) (not including cables) Note: W = a + b + 20 × n + 31 × m + 14.7 a: Power Supply Unit: PA205R and PA205C = 80; PA202 = 45; PD025 = 60; PD022=27 b: CPU Unit: CJ1-H or CJ1 = 62; CJ1M-CPU1[] = 31; CJ1M-CPU2[] = 49 The total width is given by the following: W = 156.7 + n × 20 + m × 31, where n is the number of 32-point I/O Units or I/O Control Units and m is the number of other Units.
Safety measures	Conforms to cULus and EC Directives.

*1. Disconnect the Power Supply Units LG terminal from the GR terminal when testing insulation and dielectric strength. 
       Testing the insulation and dielectric strength with the LG terminal and the GR terminals connected will damage 
       internal circuits in the CPU Unit. 
*2. Supported only when mounted to CPU Rack. 
*3. The inrush current is given for a cold start at room temperature. The inrush control circuit uses a thermistor element 
       with a low-temperature current control characteristic. If the ambient temperature is high or the PLC is hot-started, the 
       thermistor will not be sufficiently cool, and the inrush currents given in the table may be exceeded by up to twice the 
       given values. When selecting fuses or breakers for external circuits, allow sufficient margin in shut-off performance. 
*4. Maintain an ambient storage temperature of −25 to 30°C and relative humidity of 25% to 70% when storing the Unit for 
       longer than 3 months to keep the replacement notification function in optimum working condition. 
*5. Change the applied voltage gradually using the adjuster on the Tester. If the full dielectric strength voltage is applied 
       or turned OFF using the switch on the Tester, the generated impulse voltage may damage the Power Supply Unit. 
*6. CJ1W-PD022 is not insulated between the primary DC power and secondary DC power. 
*7. Internal components in the Power Supply Unit will deteriorate or be damaged if the Power Supply Unit is used for an 
       extended period of time exceeding the power supply output capacity or if the outputs are shorted.

Checking Current Consumption and Power Consumption

After selecting a Power Supply Unit based on considerations such as the power supply voltage, calculate the current and power requirements for each Rack.

Condition 1: Current Requirements

There are two voltage groups for internal power consumption: 5 V and 24 V.
Current consumption at 5 V (internal logic power supply)
Current consumption at 24 V (relay driving power supply)

Condition 2: Power Requirements

For each Rack, the upper limits are determined for the current and power that can be provided to the mounted Units. Design the system so that the total current consumption for all the mounted Units does not exceed the maximum total power or the maximum current supplied for the voltage groups shown in the following tables. 
The maximum current and total power supplied for CPU Racks and Expansion Racks according to the Power Supply Unit model are shown below. 
Note: 1. For CPU Racks, include the CPU Unit current and power consumption in the calculations. When expanding, also 
              include the current and power consumption of the I/O Control Unit in the calculations. 
           2. For Expansion Racks, include the I/O Interface Unit current and power consumption in the calculations.

Power Supply Units	Max. current supplied		Max. total power supplied
	5 V	24 V (relay driving current)
CJ1W-PA205R	5.0 A	0.8 A	25 W
CJ1W-PA205C	5.0 A	0.8 A	25 W
CJ1W-PA202	2.8 A	0.4 A	14 W
CJ1W-PD025	5.0 A	0.8 A	25 W
CJ1W-PD022	2.0 A	0.4 A	19.6 W

Conditions 1 and 2 below must be satisfied.

Condition 1: Maximum Current

(1) Total Unit current consumption at 5 V ≤ (A) value 
(2) Total Unit current consumption at 24 V ≤ (B) value

Condition 2: Maximum Power

(1) × 5 V + (2) × 24 V ≤ (C) value

Example: Calculating Total Current and Power Consumption

Example: When the Following Units are Mounted to a CJ-series CPU Rack Using a CJ1W-PA202 Power Supply Unit

Unit type	Model	Quantity	Voltage group
			5 V	24 V
CPU Unit	CJ1G-CPU45H	1	0.910 A	---
I/O Control Unit	CJ1W-IC101	1	0.020 A	---
Basic I/O Units (Input Units)	CJ1W-ID211	2	0.080 A	---
	CJ1W-ID231	2	0.090 A	---
Basic I/O Units (Output Units)	CJ1W-OC201	2	0.090 A	0.048 A
Special I/O Unit	CJ1W-DA041	1	0.120 A	---
CPU Bus Unit	CJ1W-CLK23	1	0.350 A	---
Current consumption	Total		0.910 + 0.020 + 0.080 × 2 + 0.090 × 2 + 0.090 × 2 + 0.120 + 0.350	0.048 A × 2
	Result		1.92 A ( ≤ 2.8 A)	0.096 A ( ≤ 0.4 A)
Power consumption	Total		1.92 × 5 V = 9.60 W	0.096 A × 24 V = 2.304 W
	Result		9.60 + 2.304 = 11.904 W ( ≤ 14 W)

Power Supply UNit For CJ

Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W).

Please refer to the overview page for features of this product.

The replacement notification function can prevent an overflow of the system due to the power lifetime. (CJ1W-PA205C only)

Power Supply Unit provides wide variations according to the system scale up to maximum 25 W.

Power Supply Unit provides wide variations according to the power supply (100 to 240 V AC/ 24 V DC) status.

The output contact during operation enables you to check the CPU operation. (CJ1W-PA205R only)

Conforming to the SEMI-F47 Standard. *

* AC input type, 200 V min. input.

International Standards

• The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Power Supply Units

Product name		Power  supply  voltage	Output capacity			Options			Model	Stand-  ards
			5-VDC  output  capacity	24-VDC  output  capacity	Total  power  con-  sumption	24-VDC service  power  supply	RUN  output	Mainte-  nance  forecast  monitor
AC  Power  Supply Unit		100 to  240  VAC	5 A	0.8 A	25 W	No	No	Yes	CJ1W-PA205C	UC1,  N, L,  CE
							Yes	No	CJ1W-PA205R
			2.8 A	0.4 A	14 W		No	No	CJ1W-PA202
DC  Power  Supply Unit		24  VDC	5 A	0.8 A	25 W		No	No	CJ1W-PD025
			2 A	0.4 A	19.6 W		No	No	CJ1W-PD022	UC1,  CE

Note: This unit cannot be used with the Machine Automation Controller NJ-series.

Accessories

There is no accessory for the CJ series Power Supply Unit.

Dimensi CJ2M

CJ2M-CPU3[]

CJ2M-CPU1[]

CJ2M-MD211/MD212