Delta Programmable Logic Controller DVP Series

2nd Generation Standard Type PLC 

DVP-ES2

• Integrated communication functions
• Built-in 1 RS-232 and 2 RS-485 ports
• V2.0 and later version models supports real time clock and file register (5k words)

DVP-ES2 provides 16/20/24/32/40/60 I/O points for a variety of applications.

DVP20EX2 provides 12-bit 4 analog inputs/ 2 analog outputs it offers a complete analog control solution.

Program capacity: 16k steps

Data register       : 10K words 

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

High efficient processing ability: 1K steps of programs can be completed within 1ms

Max. 10kHz pulse control. Specific motion control instruction such as mark/masking and instant frequency changing are available for multi-axes applications

Up to 4 levels of password of password protection secures your source programs and intellectual property.

Built-in High-Speed Counters

1-phase 1 input : Sets 2/6 , Bandwidth 100kHz/10kHz

1-phase 2 inputs : Sets 2, Bandwidth 100kHz, 

2-phase 2 inputs : Sets 1/3, Bandwidth 15kHz/5kHz

New Members of 

DVP-ES2 Series

2nd Generation Standard Type PLC with built-in CANopen interface

DVP32ES2-C

Inheriting the fast execution speed of ES2, DVP32ES2-C boosts the productivity by built-in 1Mbps CANopen interface specialize in noise-immunity and easy wiring.

Fast processing speed             High-speed industrial

                                                network: CANopen

COM3 supports standard CANopen DS301 protocol

Provides versatile communication types: PDO, SDO, 

1Mbps high speed transmission for large data

Maximum PDO tranmission  up to 390 bytes

Maximum PDO receiving up to 390 bytes

Ability to connect with 16 slaves via CANopen

CANopen Builder software is used to construct slave nodes

New Member of DVP-EX2 Series2nd Generation Temperature/Analog I/O PLCDVP30EX2

Integrated controller able to control temperature and analog input

Built-in 16-bit 3 analog inputs / 1 analog output.

With built-in PID auto tuning function, it offers a complete analog control solution.

Provides 3 analog inputs for PT/NI temperature input, precision of 0.1 degree can be readily achieved.

Suitable for the specific industries that require temperature and analog input control such as boiler industries and HVAC.

Built-in Analog I/O in EX2 Model

Analog Input    : Points 3, Resolution 16-bit, Spec -20~20mA or -10~10V

Analog Output : Points 1, Resolution 12-bit, Spec 0~20mA or -10~10V

Built-in temperature control function in DVP30EX2

Sensor                      : PT100/PT1000

Temperature Range : -200C~800C

Value Range            : -2000~8000

Sensor                     : NI100/NI1000

Temperature Range: -100C~180C

Value Range           : -1000~1800

Basic Type PLCDVP-EC3Applicable for sequence control and simple RS-485/MODBUS communication 

Built-in I/O:10/14/16/20/24/30/32/40/60

Program capacity: 4k steps

COM Port: Built-in RS-232 & RS-485 ports

(10/14/30-point models do not supports RS-485), compatible with MODBUS ASCII/RTU Protocol 

Supports 2 points (Y0,Y1) of independent high-speed (max.10kHz) pulse output 

Built-in High Speed Counters

1-phase 1 input : Sets 2/2, Bandwidth 20kHz/10kHz

1-phase 2 input : Sets 1, Bandwidth 20kHz

2-phase 2 input : Sets 1, Bandwidth 4kHz

Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
• Supports max 4.hardware 200kHz high-speed counters 
• Increases many motion control instruction to meet the applications that require high-speed and high-precision positioning control such as labeling machines, packaging machines and printing machines
• Offers linear/ arc interpolation motion control
• Provides up to 16 external interrupt pointers

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out.
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged 
• Up to 4-level password protection protects your source programs and intellectual property

Outstanding Operation Performance

CPU+ASIC dual processors support floating point operations.

The max. execution speed of basic instructions is able to reach 0.24 us

Flexible Function Extension Modules & Cards

The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

PLC-Link

PLC-Link allows the user link up a max. 32 units to the network without having to install extra communication extension modules.

Brand-New High-Speed Extension Modules

The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program.

Built-in 4 Hardware High-Sped Counters

Standard

1-phase 1 input : Sets 8, Bandwidth 10kHz

Hardware high-speed counter

1-phase 1 input : Sets 4, Bandwidth 200kHz

1-phase 1 input : Sets 4, Bandwidth 200kHz

1-phase 2 input : Sets 2/2, Bandwidth 200kHz/20kHz

2-phase 2 input : Sets 2/2, Bandwidth 200kHz/20kHz

Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output
• Supports max. 4 hardware 200kHz high-speed counters
• Increases many motion control instructions to meet the applications that require high-speed and high-precision positioning control such as labeling machines, packaging machines and printing machines
• Offers linear/ arc interpolation motion control
• Provides up to 16 external interrupt pointers.

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
• Up to 4-level password protection protects your source programs and intellectual property 

Supports DVP-S series left-side and right-side modules.

Add new ETHRW instruction for Ethernet communication.

Built-in 4 Hardware High-speed Counters

Standard

1-Phase 1 input  : sets 1, Bandwidth 10kHz

Hardware High-speed counter

1-Phase 1 input  : sets 4, Bandwidth 200kHz

1-Phase 2 input  : sets 2/2, Bandwidth 200kHz/20kHz

2-Phase 2 input  : sets 2/2, Bandwidth 200kHz/20kHz

2nd Generation Analog I/O Slim PLC DVP-SS2

Economic and Compact PLC.Max.480 I/O Points

Program capacity  : 8k steps

Data register: 5k words

Higher execution speed compared to the competition: LD: 0.35us, MOV: 3.4 us 

Built-in RS-232 and RS-485 ports (Master/Slave).

Supports standards MODBUS ASCII/RTU protocol and PLC Link function

Motion Control Functions.

4k sets of 10kHz pulse output

8k sets high-speed counters: 20kHz/4 points, 10kHz/4 points

Built-in High-speed Counters

1-Phase 1 inputs  : Sets 4/4, Bandwidth 20kHz/10kHz

1-Phase 2 inputs  : Sets 2, Bandwidth 20kHz

2-Phase 2 inputs  : Sets 2/2, Bandwidth 10kHz/5kHz

2nd Generation Advanced Slim PLC DVP-SA2

Compact PLC Specializes in motion Control

4 sets of high-speed pulse output: 100kHz/2sets, 10kHz/2sets
8 sets of high-speed pulse input  : 100kHz/2sets, 10kHz/6sets, 1 group of A/B phase 500kHz
Supports 2-axis linear and arc interpolation
Program capacity : 16k steps
Data register        :  10k words
Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us
Built-in 1 RS-232 and 2 RS-485 ports (Master/Slave). Supports standard MODBUS ASCII/RTU protocol and PLC Link function
No.battery required. Maintenance-free

(Real time clock operates for 15 days after power off )

Supports DVP-S series left-side and right-side modules

Built-in High-speed Counters

1-Phase 1 inputs  : Sets 2/6, Bandwidth 100kHz/10kHz

1-Phase 2 inputs  : Sets 2, Bandwidth 100kHz

2-Phase 2 inputs  : Sets 1/3, Bandwidth 50kHz/5kHz

2nd Generation Analog I/O Slim PLC 

DVP-SX2

Compact PLC with incredible Analog Function
4 Analog Inputs, 2 Analog Outputs, High Efficient PID Auto Tuning Performance

Program capacity : 16k steps

Data register        :  10k words

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

Built-in 1 RS-232 and 2 RS-485 ports (Master/Slave). Supports standard MODBUS ASCII/RTU protocol and PLC Link function 

No.battery required. Maintenance-free

(Real time clock operates for 15 days after power off )

Supports DVP-S series left-side and right-side modules

Motion Control Functions.

4k sets of high-speed pulse output  : 100kHz/2sets, 10kHz/2 sets

8k sets high-speed pulse input        : 100kHz/2 points, 10kHz/6 points

Supports 2-axis linear and arc interpolation.

Built-in Analog Input

Points          : 4

Resolution  : 12-bit

Spec            : -20~20mA or -10~10V  4~20mA

Analog Output 

Points         : 2

Resolution  : 12-bit

Spec           :  0~20mA or -10~10V  4~20mA

Network Type Advanced Slim PLCDVP-SE

The most complete network type slim PLC in the industry 

Provides 8 digital inputs and 4 digital outputs

Built-in mini USB, Ethernet, and 2 RS-485 ports

Program capacity: 16k steps

Data register : 12k words 

Higher execution speed compared to the competition: LD: 0.35 us, MOV: 3.4 us

Built-in mini Ethernet supports MODBUS TCP and Ethernet/IP 

IP Filter function is a firewall that offers the first line of defense and provides protection from malware and network threats\

Supports DVP-S series left-side and right-side modules

No battery required. Maintenance-free 

(Real time clock operates for 15 days after power off)

DVP-PM

General Purpose Motion
Controller
DVP10PM00M

• 2/3/4/5/6-axis linear interpolation motion control
• Highly accurate PWM 200kHz output, resolution 0.3%
• 8 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark/Mask function (for bag making)
• Built-in 24 I/O points Max.256 I/O points
• Program capacity: 64k steps Data register: 10k words 
• Higher speed compared to the competition: LD: 0.13 us, MOV: 2.1 us
• Built-in RS-232 and RS-485 ports. Supports MODBUS ASCII/RTU protocol.

Motion Control Functions

• High-speed pulse output: built-in 6 sets of A/B phase pulse outputs
• 6 sets of high-speed counters and hardware digital filter for counting
• Single-axis motion control function (supports 1st speed, 2nd speed, MPG function)
• Electronic gear function

Professional Motion Controllers DVP20PM00D/M

• Compatible with G-Code/M-Code 
• 3-axis linear/ arc/ helical interpolation 
• Supports electronic cam (2048 points) function for flying shear and rotary cut applications
• Not only a motion controller but also an extension module
• Built-in 16 I/O points.Max.512 I/O points
• Program capacity: 64k steps
• Dta register : 10k words
• Built-in RS-232 and RS-485 ports Supports standards MODBUS ASCII/RTU Protocol

Motion Control Functions

• Built-in A/B phase differential signal outputs: 2 sets (DVP20PM00M)/3 sets (DVP20PM00M).Max differential output frequency is 500kHz 
• Support MPG inputs
• Single-axis motion control function (supports 1 speed, 2 speed, MPG function)
• Electronic gear function.

PLC Mitsubishi FX3S Melsec Compact PLC :FX3S-10MR/ES,FX3S-14MR/ES,FX3S-20MR/ES,FX3S-30MR/ES,FX3S-30MR/ES-2AD

New Possibilities

The compact PLC is especially well suited for food and beverage applications, as well as material handling, and fan and pump application for irrigation and building automation.

Enhanced expandability

Beside the standard built-in RS-422 interface port for serial communication with 115.2 kbps, the FX3S can use a large range of adapters providing RS232,RS485,RS422 and Ethernet communication options. These can be used to connect and control various third party products such as bar code readers or panel printers. In addition, compact expansion boards for additional digital inputs  and  outputs are available, which can be plugged directly into the controller without any additional installation  space required  on the right or left of the controller. A memory cassette to extend the integrated memory can additionally be connected.

On the left side of the PLC, special adapter for analog inputs, Ethernet and serial communication (compatible with MODBUS) can be easily connection to any PC or laptop for high speed program  uploads and downloads along with monitoring.

Mitsubishi Electric introduces the FX3S Programmable Logic Controller-the new entry level model for the proven  FX3 series. Notable attributes of the FX3S PLC are its flexibility and expandability. it allows users to choose only the functionality necessary to perform a specific application, saving on hardware costs.

The FX3S series PLC provides full function PLC control, built-in high-speed inputs and outputs, and multiple, built-in communication ports. it also includes expansion options for communications, analog and temperature control. As part of the FX3 series, the FX3S can use many of the existing programming resources that are available for other FX3 series PLCs. This greatly reduces time and costs for system set up.

The FX3S PLC is designed to handle basic control tasks, such as simple positioning or analog, and temperature control operations. It excels in small, standalone applications that don't require complex control tasks.

High-speed operation 

The FX3S processes basic instruction in 0.21 us, which is fester by approximately 3 times compared with is predecessor, the FX1S. For users this means quicker program response and more accurate process performance as inputs, outputs and actions are processed and monitored more time per second.

Ample program capacity 

In total, the built-in maintenance free EEPROM of the FX3S can store up to 16,000 steps are reserved for the PLC program and up to 12,000 steps can be used for comments .

The CPU of the FX3S supports in common 116 different applied instructions also dedicated instruction for frequency inverter communication are supported.

Analog value processing 

The FX3S is also available with integrated analog inputs (FX3S-30M[]-20AD). Along with an optional analog values can then measured and processed with this model.

Built-in Positioning  control

The FX3S series comes with high speed counters (up to 60kHz) and pulse train outputs (for 2 axes and up to 100kHz). and pulse train outputs (for 2 axes and up to 100kHz). The high speed counters can be configured in a single or two phase input.

pulse train outputs can be configured to provide continuous pulse streams at different frequencies or a set quantity of pulses at a single frequency. Simple positioning solutions can be effectively managed this way without much hardware and programming effort.

Programming made easy 

The FX Family has a simple programming structure combining  Basic and Applied instructions. The Basic instructions common to all FX Family PLCs. Applied instructions provide the specialist control options such as data comparisons, PID and communications control, all of which are available on FX3S.

For the programming of the FX3S, GX Works2 is the first choice. This powerful, intuitive, and efficient programming tool reduces program development time and has an easy to use interface it is part of Mitsubishi Electric's integrated engineering environment iQ Works.

Compatibility with global standards

The FX3S conforms to the EC Directive and UL Standard, which make it to a product to trust. Even more flexibility is achieved       with the    choice between sink or source inputs.

FX3S-10MR/ES

Specifications

I/O points                  : Max 30

Adress range             : X0-X17/Y0-Y15 (octal)

Power supply            : 100-240V AC, 50/60 Hz or 24VDC

Program memory : 16,000 steps EEPROM (internal), exchangeable EEPROM memory cassette;program capacity is limited to 4,000 steps

Instruction Time: 0.21 us/basic instruction

Integrated digital inputs

• Number of inputs : 6
• Input Voltage       :  24V DC (+10%)
• Input form           : sink/source
• Response Time    : Approx. 10 ms
• Isolation              : Photocoupler isolation

Integrated analog inputs

• Number of inputs               :  -
• Analog input Voltage         :  -

Integrated outputs 

• Number of outputs            : 4
• Switching voltage             : 240 V AC , ,30V DC (relay output), 5-30V DC (transistor output)
• Output type/form              : Relay or transistor
• Max load resistive            : 2a/point, max.8 A for 4 output points/common terminal(relay),     0.5A/point ;max 0.8a for 4 output points/common terminal (transistor)
• Max load inductive          :  80VA (relay), 12W/point (at 24V DC); max.192W for 4 output points/common  terminal (transistor)
• Response time                  : 10ms (relay), ,5 us (for Y000 and Y0010/0.2ms (for all other outputs) (transistor)
• Isolation                           : Photocoupler Isolation

High-speed counters   : 21 total, with 16 1-phase (C235-C250) and 5 2-phase (C251-255)

Counting range            : -2, 147, 483,648-2,147,483,647

Service power supply  : 24V DC, 400mA

Environment               : 0-55C ambient temperature;5-9% relative humidity

FX3S-14MR/ES

Specifications

I/O points                  : Max 30

Adress range             : X0-X17/Y0-Y15 (octal)

Power supply            : 100-240V AC, 50/60 Hz or 24VDC

Program memory : 16,000 steps EEPROM (internal), exchangeable EEPROM memory cassette;program capacity is limited to 4,000 steps

Instruction Time: 0.21 us/basic instruction

Integrated digital inputs

• Number of inputs : 8
• Input Voltage       :  24V DC (+10%)
• Input form           : sink/source
• Response Time    : Approx. 10 ms
• Isolation              : Photocoupler isolation

Integrated analog inputs

• Number of inputs               :  -
• Analog input Voltage         :  -

Integrated outputs 

• Number of outputs            : 6
• Switching voltage             : 240 V AC , ,30V DC (relay output), 5-30V DC (transistor output)
• Output type/form              : Relay or transistor
• Max load resistive            : 2a/point, max.8 A for 4 output points/common terminal(relay),     0.5A/point ;max 0.8a for 4 output points/common terminal (transistor)
• Max load inductive          :  80VA (relay), 12W/point (at 24V DC); max.192W for 4 output points/common  terminal (transistor)
• Response time                  : 10ms (relay), ,5 us (for Y000 and Y0010/0.2ms (for all other outputs) (transistor)
• Isolation                           : Photocoupler Isolation

High-speed counters   : 21 total, with 16 1-phase (C235-C250) and 5 2-phase (C251-255)

Counting range            : -2, 147, 483,648-2,147,483,647

Service power supply  : 24V DC, 400mA

Environment               : 0-55C ambient temperature;5-9% relative humidity

FX3S-20MR/ES

Specifications

I/O points                  : Max 30

Adress range             : X0-X17/Y0-Y15 (octal)

Power supply            : 100-240V AC, 50/60 Hz or 24VDC

Program memory : 16,000 steps EEPROM (internal), exchangeable EEPROM memory cassette;program capacity is limited to 4,000 steps

Instruction Time: 0.21 us/basic instruction

Integrated digital inputs

• Number of inputs : 12
• Input Voltage       :  24V DC (+10%)
• Input form           : sink/source
• Response Time    : Approx. 10 ms
• Isolation              : Photocoupler isolation

Integrated analog inputs

• Number of inputs               :  -
• Analog input Voltage         :  -

Integrated outputs 

• Number of outputs            : 8
• Switching voltage             : 240 V AC , ,30V DC (relay output), 5-30V DC (transistor output)
• Output type/form              : Relay or transistor
• Max load resistive            : 2a/point, max.8 A for 4 output points/common terminal(relay),     0.5A/point ;max 0.8a for 4 output points/common terminal (transistor)
• Max load inductive          :  80VA (relay), 12W/point (at 24V DC); max.192W for 4 output points/common  terminal (transistor)
• Response time                  : 10ms (relay), ,5 us (for Y000 and Y0010/0.2ms (for all other outputs) (transistor)
• Isolation                           : Photocoupler Isolation

High-speed counters   : 21 total, with 16 1-phase (C235-C250) and 5 2-phase (C251-255)

Counting range            : -2, 147, 483,648-2,147,483,647

Service power supply  : 24V DC, 400mA

Environment               : 0-55C ambient temperature;5-9% relative humidity

FX3S-30MR/ES

Specifications

I/O points                  : Max 30

Adress range             : X0-X17/Y0-Y15 (octal)

Power supply            : 100-240V AC, 50/60 Hz or 24VDC

Program memory : 16,000 steps EEPROM (internal), exchangeable EEPROM memory cassette;program capacity is limited to 4,000 steps

Instruction Time: 0.21 us/basic instruction

Integrated digital inputs

• Number of inputs : 16
• Input Voltage       :  24V DC (+10%)
• Input form           : sink/source
• Response Time    : Approx. 10 ms
• Isolation              : Photocoupler isolation

Integrated analog inputs

• Number of inputs               :  -
• Analog input Voltage         :  -

Integrated outputs 

• Number of outputs            : 14
• Switching voltage             : 240 V AC , ,30V DC (relay output), 5-30V DC (transistor output)
• Output type/form              : Relay or transistor
• Max load resistive            : 2a/point, max.8 A for 4 output points/common terminal(relay),     0.5A/point ;max 0.8a for 4 output points/common terminal (transistor)
• Max load inductive          :  80VA (relay), 12W/point (at 24V DC); max.192W for 4 output points/common  terminal (transistor)
• Response time                  : 10ms (relay), ,5 us (for Y000 and Y0010/0.2ms (for all other outputs) (transistor)
• Isolation                           : Photocoupler Isolation

High-speed counters   : 21 total, with 16 1-phase (C235-C250) and 5 2-phase (C251-255)

Counting range            : -2, 147, 483,648-2,147,483,647

Service power supply  : 24V DC, 400mA

Environment               : 0-55C ambient temperature;5-9% relative humidity

FX3S-30MR/ES-2AD

Specifications

I/O points                  : Max 30

Adress range             : X0-X17/Y0-Y15 (octal)

Power supply            : 100-240V AC

Program memory : 16,000 steps EEPROM (internal), exchangeable EEPROM memory cassette;program capacity is limited to 4,000 steps

Instruction Time: 0.21 us/basic instruction

Integrated digital inputs

• Number of inputs : 16
• Input Voltage       :  24V DC (+10%)
• Input form           : sink/source
• Response Time    : Approx. 10 ms
• Isolation              : Photocoupler isolation

Integrated analog inputs

• Number of inputs               :  2
• Analog input Voltage         :  0-10V DC

Integrated outputs 

• Number of outputs            : 4
• Switching voltage             : 240 V AC , ,30V DC (relay output), 5-30V DC (transistor output)
• Output type/form              : Relay or transistor
• Max load resistive            : 2a/point, max.8 A for 4 output points/common terminal(relay),     0.5A/point ;max 0.8a for 4 output points/common terminal (transistor)
• Max load inductive          :  80VA (relay), 12W/point (at 24V DC); max.192W for 4 output points/common  terminal (transistor)
• Response time                  : 10ms (relay), ,5 us (for Y000 and Y0010/0.2ms (for all other outputs) (transistor)
• Isolation                           : Photocoupler Isolation

High-speed counters   : 21 total, with 16 1-phase (C235-C250) and 5 2-phase (C251-255)

Counting range            : -2, 147, 483,648-2,147,483,647

Service power supply  : 24V DC, 400mA

Environment               : 0-55C ambient temperature;5-9% relative humidity

INVERTER DELTA VF D-E : VFD002E11P,VFD002E21P,VFD002E23P,VFD004E11P,VFD004E21P,VFD004E23P,VFD004E43P

•  Modular Design structure and extension with optional cards with optional cards
• Standards MODBUS Protocol Standard MODBUS Protocol via RS-485
• Built-in EMI Filter (230V 1-Phase and 460V 3-Phase) To reduce electromagnetic interface efficiently
• Compact Design Space saving and easy DIN rail mounting with optional DIN rail adapter 
• Flexible Extension Via optional cards , such as I/O card, Relay card , PG (Encoder) card and USB card, to meet your application requirements
• Easy DC BusSharing Multiple VFD-E can be connected in parallel to share the regenerative braking energy, In this way over-voltage is prevented and the DC-bus voltage stabilized.
• Removable keypad The standard keypad acts as status monitor , More functions including parameter modification, RUN/STOP, speed change, and status display via optional keypad.
• Built-in PLC Function Easy to write PLC program without additional PLC
• Optional Feildbus Modules Provide connection to variety of networks, including PROFIBUS, DeviceNet, Lon Works and CANopen.
• RFI-Switch for IT Mains Removable "Y" capacitor to use with IT mains supplies.
• Complete Protection Function High precision current detection, full overload protection (oL,oL1 and oL2), over-voltage/over-current stall prevention , short-circuit protection, reset after fault, speed search function and motor overheat protection by PTC.
• Power range 

1-Phase 115V series: 0.2~0.75kW (0.25~1hp)   1-Phase 230V series: 0.2~2.2kW (0.25~3hp)   3-Phase 230V series: 0.2~3.7kW (0.25~5hp)    3-Phase 460V series: 0.4~3.7kW ( 0.50~5hp) 

• Side-by-side installation (40C) High-efficiency cooling and flexible space

• Easy Maintenance Removable cooling fan for easy maintenance

Application Cases

Vacuum compressor

It reduces the large load of instant vacuum with VFD-E outstanding overload capacity

Escalator

It not only saves energy with built-in PLC function and multi-step speed but also eliminates cost of external controller.

Application Fields

Conveyor and Transportation Machinery

• Conveyor belt
• Automatic doors
• Roller door
• Small elevator
• Escalator
• Parking device
• X-Y axis of traveling crane

Food Processing 

• Dumpling maker
• Food stirrer
• Noodle maker

Machine Tool/Metal Processing Machinery

• Grinder 
• Drill
• Small lathe
• Milling machines
• Injection molding (clamp)

Wood Working Machinery

• 4 side planer
• Wood carver
• Wood working machine
• Simple cutting machine for wood working
• Spraying machine

Fan/Pump Equipment

• Building air conditioner 
• Waste water processing system
• Constant pressure water treatment system
• Water treatment pump
• Agricultural pump
• Temperature control of middle/large oven
• Air compressor
• Heat exchange fans
• Building water dispenser system
• Dryer's windmill

Paper/Textile Machine

• Round weaver
• Cross weaver
• Ribbon weaver
• Printing press
• Industrial sewing machines

Others

• Ironing machine
• Pulverizer
• Treadmil
• Feeder
• Industrial washing machine
• Car washing machine
• Packing machine
• Centrifuge
• Liquid mixer

Model
VFD002E11A/11/11C
VFD002E21A/21T/21C
VFD002E23A/23T/23C
VFD004E11A/11T/11C
VFD004E21A/21T/21C
VFD004E23A/23T/23C
VFD004E43A/43T/43C

VFD007E11A/11C
VFD015E21A/21C
VFD022E21A/21C
VFD022E23A/23C
VFD022E43A/43C

VFD055E23A/23C
VFD055E43A/43C
VFD075E23A/23C

VFD150E23A/23C
VFD150E43A/43C

VFD002E11P
VFD002E21P
VFD002E23P
VFD004E11P
VFD004E21P
VFD004E23P
VFD004E43P

VFD007E21A/21T/21C
VFD007E23A/23T/23C
VFD007E43A/43T/43C
VFD015E23A/23T/23C
VFD015E43A/43T/43C

VFD037E23A/23C
VFD037E43A/43C

VFD075E43A/43C
VFD110E43A/43C

VFD185E43A/43C
VFD220E43A/43C

VFD007E21P
VFD007E23P
VFD007E43P
VFD015E23P

New Models
VFD-E-T  : Built-in brake chopper for frame A
VFD-E-P  : Plate drive
VFD-E-C : Built-in CANopen communication

Accessories

Optional Cards

EME-R3AA

Relay card (3 from A/NO contact)

EME-A22A

Analog I/O Card (12 bits)

EME-33A

I/O card (photocoupler 3in+3out)

EME-A22A

Analog I/O card (12 bits)

EME-PG01

PG card

EME-USB01

Fieldsbus Modules

DeviceNet

Profibus

Lon Works

Others

Digital Keybad

Brake resistor

INVERTER DELTA VFD-EL: VFD002EL11A,VFD002EL21A,VFD002EL23A,VFD004EL11A,VFD004EL21A,VFD004EL23A,VFD004EL43A,VFD007EL21A,VFD007EL23A,VFD007EL43A,VFD015EL23A,VFD015EL43A ,VFD007EL11A,VFD015EL21A,VFD022EL21A,VFD022EL23A,VFD037EL23A,VFD037EL43A

Features

• Standard MODBUS Protocol Standard MODBUS Protocol via RS-485
• Built-in EMI Filter (230V 1-Phase and 360V 3-Phase) The built-in EMI filter reduces electromagnetic interferences and complies with EN61800-3 standard.
• Compact Design Space saving and easy DIN rail mounting with optional DIN rail adapter (Built in Frame B)
• Optional Feildbus Modules Provide connection to variety of networks, including PROFIBUS, DeviceNet, Lon Works and CANopen.
• RFI-Switch for IT Mains Removable "Y" capacitor to use with IT mains supplies.
• Easy DC BUS Sharing Multiple VFD-EL can be connected in parallel to share the regenerative braking energy In this way, over-voltage is prevented and the DC-bus voltage stabilized. This function is not for 115V models
• Complete Protection Function High precision current detection, full overload protection (oL,oL1 and oL2), over-voltage/over-current stall prevention , short-circuit protection, reset after fault, speed search function and motor overheat protection by PTC.
• Power range 

1-Phase 115V series: 0.2~0.75kW (0.25~1hp)   1-Phase 230V series: 0.2~2.2kW (0.25~3hp)   3-Phase 230V series: 0.2~3.7kW (0.25~5hp)    3-Phase 460V series: 0.4~3.7kW ( 0.50~5hp) 

• Side-by-side installation (40C) High-efficiency cooling and flexible space

• Easy Maintenance Removable cooling fan for easy maintenance

Applications

Conveyor Belts

1. Multi-step speed Application: Provides multi-step speed settings to meet the needs of conveyor belt.
2. Side-by-side installation to save space
3. DC-bus sharing: connect multiple drives in parallel to share the regenerative energy and prevent over-voltage

Winders

With auto acceleration/deceleration function, it can have a rapid start/stop to increase productivity and speed

Constant Pressure Control of Water Pumps

1. Built-in smart PID controller to save the cost of specific external PID meter.
2. Built-in auto detection of water suspension and auto power-on save the cost of external PLC controller and relay.
3. A wide range of input voltages, including 1-phase 110V/230V and 3-Phase 230V/460V, for various pump applications and different countries.

 Application Fields

Conveyor and Transportation Machinery

• Conveyor belt
• Automatic doors
• Roller door
• Small elevator
• Escalator
• Parking device
• X-Y axis of traveling crane

Food Processing 

• Dumpling maker
• Food stirrer
• Noodle maker

Machine Tool/Metal Processing Machinery

• Grinder 
• Drill
• Small lathe
• Milling machines
• Injection molding (clamp)

Wood Working Machinery

• 4 side planer
• Wood carver
• Wood working machine
• Simple cutting machine for wood working
• Spraying machine

Fan/Pump Equipment

• Building air conditioner 
• Waste water processing system
• Constant pressure water treatment system
• Water treatment pump
• Agricultural pump
• Temperature control of middle/large oven
• Air compressor
• Heat exchange fans
• Building water dispenser system
• Dryer's windmill

Paper/Textile Machine

• Round weaver
• Cross weaver
• Ribbon weaver
• Printing press
• Industrial sewing machines

Others

• Ironing machine
• Pulverizer
• Treadmil
• Feeder
• Industrial washing machine
• Car washing machine
• Packing machine
• Centrifuge
• Liquid mixer

Model

VFD002EL11A

VFD002EL21A

VFD002EL23A

VFD004EL11A

VFD004EL21A

VFD004EL23A

VFD004EL43A

VFD007EL21A

VFD007EL23A

VFD007EL43A

VFD015EL23A

VFD015EL43A

VFD007EL11A

VFD015EL21A

VFD022EL21A

VFD022EL23A

VFD037EL23A

VFD037EL43A

Fieldbus Modules

DeviceNet

CME-DN01

Profibus

CME-PD01

Lon Works

CME-COP01

Accessories

Zero phase reactor 

RF220X00A

Keypad for communication

VFD-PU06

Grounding plate

MKE-EP

Break resistor

Brake Unit

BUE-20015

BUE20037

BUE-40015

BUE-40037

Mitsubishi Inverter FR-D700 Series

Features

• Improved reliability and easy maintenance

Spring clamp terminals provide high reliability and easy wiring. Shutoff circuit (hardware)  securely provides emergency output shutoffs. The inverter with the safety stop function can comply with the safety standard without incurring too much cost. Parameter writing/reading can be restricted with a 4-digit password. The lives of the cooling fan and capacitor have been extended. Using the self-diagnosis function, the part life warning can be output and the degree of deterioration can be monitored to prevent malfunction.

• Pursuing the best performance

The General-purpose magnetic flux vector control and the auto tuning function enable operation in applications that require large starting torque. (150% 1Hz, 200% 3Hz (3.7K or lower with the slip compensation))

• Easy-to-use (Pursing the easy operation)

The non-slip, adaptable scroll speed setting dial allows for quick jumps or precise increments based on turning speed. Setting can be made easily from a personal computer with FR Configurator. An enclosure surface operation panel, which can be attached on an enclosure surface, is available as an option. Operation panel for the FR-E500 series inverters can be also connected . The inverters with 0.4K or higher capacity have built-in regenerative brake transistors, and their usage can be extended to a lift application.

• Environmentally friendly 

Filter options reduce the electromagnetic noise generated at the inverter and enables the compliance with the harmonic suppression guidelines of japan.

Model

FR-D740[]-0.4K 

Specifications

Control method : Soft-PWM control, high carrier frequency PWM control (V/F control, General-purpose magnetic flux vector control, Optimum excitation control can be selected)

Starting torque : 150% 1Hz , 200% 3 Hz (3.7K or lower) with General-purpose magnetic flux vector control and slip compensation. 

Output frequency range: 0.2 to 400Hz

Regenerative /deceleration time setting : 0.1K/0.2K....150%, 0.4/0.75K ...100%, 1.5K...50%, 2.2K or higher ...20%

Accelerations/deceleration time setting : 0 to 3600s (up to two types of accelerations can be set individually)

Multi-speed  : 15 speed

Speed command : 0 to 5VDC, 0 to 10VDC, 4 to 20mA, digital input with setting dial, digital setting with operation panel or parameter unit.

Alarm output  : 1 changeover contact output (230VAC 0.3A 30VDC 0.3A) open collector output

Output signal  : One type of open  collector and one type of contact output ( 1 changeover contact) can be selected from inverter running, up to frequency, frequency detection, output current detection, operation ready, overload warning, fault output, and alarm, etc.

Monitor function : One monitored item can be selected from output frequency, motor  current (steady or peak value), output voltage, frequency setting value, converter output voltage, regenerative brake duty, and output power, etc. Pulse train output (1440 pulses/s 1mA) 

Restart after instantaneous power failure : Available (reduced voltage (frequency search selectable))

Communication function  : RS-485 supported (Modbus-RTU) as standard.

Mitsubishi Inverter FR-F700PJ Series : FR-F740PJ-3.7K

FR-F700PJ Series
Features

• Suitable for both the general-purpose motor and the IPM motor

The series can drive both a general-purpose motor and IPM motor. Switching between the two motor controls is simple--just a single parameter setting. Initially, a general purpose motor could be used, then upgraded to an IPM motor without switching this inverter, leading to lower cost of equipment.

• Environmentally Friendly 

Power factor improving DC reactor, common mode choke (line noise filter), capacitive filter (radio noise filter) are all essential for air conditioning applications, and all of these are included in the conditioning applications and all of these are included in the Filter pack. The inverter with Filter pack (FR-F7[]0PJ-[]F) is also available The wiring with different options is no longer required.

Less wiring and smaller space is required when Filter pack also enables compliance with the harmonic suppression guideline, the architectural standard specifications (electrical installation), and the architectural standard specifications (machinery installation) (2010 revisions) in japan 

• Easy-to-use

The following functions provide the ideal operation for fans and pumps (PID control, Optimum excitation control, regeneration avoidance, and automatic restart after instantaneous power failure)

• Improved reliability and easy maintenance 

Spring clamp terminals provide high reliability and easy wiring. The lives of the cooling fan and capacitor have been extended. Using the self-diagnosis function, the component life warning can be monitored to prevent malfunction.

Model

FR-F740PJ-3.7K 

Specifications

Control method  : Soft-PWM control, high carrier frequency PWM control (V/F control, General-purpose magnetic flux vector control, Optimum excitation control, and IPM motor control can be selected)

Starting torque General-purpose motor control  : 120% (at 1Hz) with General-purpose magnetic flux vector control and slip compensation.

Starting torque IPM motor control  :  50%

Output frequency range General-purpose  : 0.2 to 400Hz

Output frequency range IPM motor control  : MM-EF : 0 to 135Hz

Regenerative braking torque General-purpose motor control  : 15%  * 1

Regenerative braking torque IPM motor control  : 5 % (10% for 1.5kW or lower)*1

Acceleration /deceleration time setting  : 0.1 to 3600s (up to two types of accelerations and decelerations can be set individually)

Multi-speed  : 15 speed

Speed command : 0 to 5VDC, 0 to 10VDC, 4 to 20mA, digital input with setting dial, digital setting with operation panel or parameter unit.

Alarm output  : 1 changeover contact output (230VAC 0.3A 30VDC 0.3A) open collector output

Output signal  : One type of open  collector and one type of contact output ( 1 changeover contact) can be selected from inverter running, up to frequency, frequency detection, output current detection, operation ready, overload warning, fault output, and alarm, etc.

Monitor function : One monitored item can be selected from output frequency, motor  current (steady or peak value), output voltage, frequency setting value, converter output voltage, regenerative brake duty, and output power, etc. Pulse train output (1440 pulses/s 1mA) 

Restart after instantaneous power failure : Available (reduced voltage (frequency search selectable))

Communication function  : RS-485 supported (Modbus-RTU) as standard.