OMON CJ1W-TC003

International Standards

• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Unit classi- fica- tion	Product name	Specifications			No. of unit numbers allocated	Current consumption (A)		Model	Stand- ards
		No. of loops	Temperature sensor inputs	Control outputs		5 V	24 V
CJ1 Special I/O Units	Temperature Control Units	4 loops	Thermocouple input (R, S, K, J, T, B, L)	Open collector NPN outputs (pulses)	2	0.25	-	CJ1W-TC001 *	UC1, N, L, CE
		4 loops		Open collector PNP outputs (pulses)		0.25	-	CJ1W-TC002 *
		2 loops, heater burnout detection function		Open collector NPN outputs (pulses)		0.25	-	CJ1W-TC003
		2 loops, heater burnout detection function		Open collector PNP outputs (pulses)		0.25	-	CJ1W-TC004
		4 loops	Platinum resistance thermometer input (JPt100, Pt100)	Open collector NPN outputs (pulses)		0.25	-	CJ1W-TC101 *
		4 loops		Open collector PNP outputs (pulses)		0.25	-	CJ1W-TC102 *
		2 loops, heater burnout detection function		Open collector NPN outputs (pulses)		0.25	-	CJ1W-TC103
		2 loops, heater burnout detection function		Open collector PNP outputs (pulses)		0.25	-	CJ1W-TC104

General Specifications

Item	Specification
Unit classification	CJ-series Special I/O Unit
Compatible Racks	CJ-series CPU Rack or CJ-series Expansion Rack
Max. number of Units	10 Units/Rack max. (CPU Rack or Expansion Rack)
CPU Unit data areas for data storage/exchange	Special I/O Unit Area (960 words) CIO 2000 to CIO 2959	20 words/Unit for constant data exchange (6 output words and 14 input words)	CPU Unit to Temperature Control Unit	Set point (SP) Operating commands RUN/STOP control Start/Stop AT Write commands Heater burnout set value
			Temperature Control Unit to CPU Unit	Process value (PV) Set point (SP) Status Heater current monitor
	DM words allocated to Special I/O Units (9,600 words) D20000 to D29599	10 words/Unit transferred when power is turned ON or Unit is restarted	CPU Unit to Temperature Control Unit	Alarm mode Alarm hysteresis
		90 words/Unit for regular data exchange	Two-way transfer between CPU Unit and Temperature Control Unit	Alarm value Input compensation value Control period Hysteresis Proportional band Integral time Derivative time Output monitor
Insulation resistance	20 M Ω min. (at 500 VDC) between the following points: All output and NC terminals and external AC terminals (Power Supply Unit) All input terminals and external AC terminals (Power Supply Unit) All input terminals and all output terminals All external DC terminals (inputs, outputs, and NC) and the FG plate Between input terminals (sensor and CT inputs) I/O terminals and NC terminals
Dielectric strength	2,000 VAC 50/60 Hz for 1 min., detected current: 1 mA The output terminals/NC terminals and external AC terminals (Power Supply Unit) 1,000 VAC 50/60 Hz for 1 min., detected current: 1 mA Input terminals and external AC terminals (Power Supply Unit) Input terminals and output terminals External DC terminals (inputs, outputs, and NC) and the FG plate 500 VAC 50/60 Hz for 1 min., detected current: 1 mA Between input terminals (sensor and CT inputs) I/O terminals and NC terminals
Internal current consumption	250 mA max., 5 VDC
Other	Other general specifications conform to the CJ-series general specifications.
Dimensions	31 × 90 × 65 mm (W × H × D)
Weight	150 g max.

Characteristics

Item	Specification
Model number	CJ1W-TC00[]	CJ1W-TC10[]
Temperature sensor	Thermocouple: R, S, K, J, T, L, B	Platinum resistance thermometer: Pt100, JPt100
Number of loops	4 loops or 2 loops with heater burnout detection *1
Control output and heater burnout alarm output	NPN or PNP outputs, both with short-circuit protection *1 External power supply voltage: 24 VDC +10%, -15% Max. switching capacity: 100 mA (per output) Leakage current: 0.3 mA max. Residual voltage: 3 V max.
Temperature control method	ON/OFF control or PID control with two degrees of freedom (Set with pin 6 on the Unit's DIP switch.)
Control operation	Forward or reverse operation (Set with pins 4 and 5 on the Unit's DIP switch.)
RUN/STOP control	Supported (Controlled from the CPU Unit through bits allocated in the Special I/O Unit area.)
Operation with CPU Unit in PROGRAM mode	The Temperature Control Unit can be set to continue operating or stop operating when the CPU Unit is in PROGRAM mode. (Set with pin 1 on the Unit's DIP switch.)
Auto/Manual switch for operational output	None
Autotuning (AT) of PID constant	Supported (Controlled from the CPU Unit through bits allocated in the Special I/O Unit area.)
Indication accuracy	Celsius: ± 0.3% of PV or ± 1 ° C (whichever is larger) ± 1 digit max. Fahrenheit: ± 0.3% of PV or ± 2 ° F (whichever is larger) ± 1 digit max. L and - 100 ° C or less for K and T are ± 2 ° C ± 1 digit max. 200 ° C or less for R and S is ± 3 ° C ± 1 digit max. No accuracy is specified for 400 ° C or less for B *2	Celsius: ± 0.3% of PV or ± 0.8 ° C (whichever is larger) ± 1 digit max. Fahrenheit: ± 0.3% of PV or ± 1.6 ° F (whichever is larger) ± 1 digit max.
Hysteresis (when using ON/OFF control)	0.0 to 999.9 ° C or ° F (0.1 ° C or ° F units)
Proportional band	0.1 to 999.9 ° C or ° F (0.1 ° C or ° F units)
Integral (reset) time	0 to 9,999 s (one-second units)
Derivative (rate) time	0 to 9,999 s (one-second units)
Control period	1 to 99 s (one-second units)
Sampling period	500 ms (4 loops)
Output refresh period	500 ms (4 loops)
Display refresh period	500 ms (4 loops)
Input compensation value	- 99.9 to 999.9 ° C or ° F (0.1 ° C or ° F units)
Alarm output setting range	- 999 to 9,999 ° C or ° F (1 ° C or ° F units) The setting range will be - 99.9 to 999.9 ° C or ° F (0.1 ° C or ° F units) for K or J with decimal point mode, or platinum resistance thermometer.B24
External terminal connections	Removable terminal block with 18 points (M3 screws)
Effect on the CPU Unit's cycle time	0.4ms

*1. The last three digits of the model number indicate the Unit's features:

*2. Indication accuracy of thermocouples 

       • Accuracy ratings are given for the Temperature Control Unit used in a set with a cold-junction compensator (on the 

           terminal block). Always use the Unit and terminal block in a set. There are labels with serial numbers attached to 

           the terminal blocks and Units to help keep track of the sets. 

       • When returning a thermocouple-type Temperature Control Unit for repair, always return the Unit and the terminal 

           block (with the cold-junction compensator) as a set.

Heater Burnout (HB) Alarm

Item	Specification
Maximum heater current	Single-phase AC, 50 A
Indication accuracy of input current	±5% of full scale ± 1 digit max.
Heater burnout alarm setting range	0.1 to 49.9 A (0.1 A units) The heater burnout detection function will not operate if the set value is set to 0.0 A or 50.0 A. (When the SV is 0.0 A, the heather burnout alarm will be OFF. When the SV is 50.0 A, the heater burnout alarm will be ON.)
Min. detectable ON time *	200 ms

* If the control output is ON for less than 200 ms, the heater burnout detection function will not operate and heater 

   current measurement will not be performed.

Current Transformer (CT) Ratings

Item	E54-CT1	E54-CT3
Max. continuous heater current	50A	120 A *
Dielectric strength	1,000 VAC (1 min.)
Vibration resistance	50 Hz, 98 m/s2
Weight	Approx. 11.5 g	Approx. 50 g
Accessories	None	Contacts (2) Plugs (2)

CJ1W-TC[][][]

Current Transformer (Optional)

E54-CT1

E54-CT3

OMRON SRT2-ID16

Brand: OMRON 

Name: Transistor Remote I/O Terminals

Model: SRT2-ID16

I/O classification: Input. 

Internal I/O circuit common: NPN (+ common). 

I/O points: 16. 

Rated voltage: 24 VDC. 

I/O rated voltage: 24 VDC. 

Long-distance Communications Supported by SRT2 Models, 

(Long-distance/High-speed Communications Selection). 

Ultra-compact at 80 x 48 x 50 (W x H x D) mm for, 

4-point and 8-point terminals and 105 x 48 x 50, 

(W x H x D) mm for 16-point terminals. 

Two independent power supplies can be used, 

because the I/O terminals are insulated from the internal circuits. 

DIN track mounting and screw mounting are both supported.

I/O classification: Output. 

Internal I/O circuit common: PNP (+ common). 

I/O points: 16. 

Rated voltage: 24 VDC. 

I/O rated voltage: 24 VDC. 

Long-distance Communications Supported by SRT2 Models, 

(Long-distance/High-speed Communications Selection). 

Ultra-compact at 80 x 48 x 50 (W x H x D) mm for, 

4-point and 8-point terminals and 105 x 48 x 50, 

(W x H x D) mm for 16-point terminals OMRON SRT2-ID16 SRT2-ID16 

Two independent power supplies can be used, 

because the I/O terminals are insulated from the internal circuits. 

DIN track mounting and screw mounting are both supported. 

Name: Compact Connectors. 

Specifications: Inputs; 2 inputs; NPN. 

Bit slave of smallest class in industry, 

Innovation in wiring for any type of machinery OMRON SRT2-ID16. 

Available in 2 types: 2-point Bit Slave Unit, 

and 4-point Bit Slave Unit. 

Compact size for installation in limited space. 

Save space and wiring since bit slave can be, 

installed near I/O devices. 

Industry first bit slave connectable with round, 

cables which can be easily purchased at a lower price. 

Connectable with flat cables, too for easy wiring. 

Cables are selectable depending on applications OMRON SRT2-ID16. Name: MIL Connectors. 

Specifications: Outputs; 32 outputs ; PNP; --. 

"Easy" and "Flexible" system expansion, 

with linked CC-Link and CompoNet. 

Branching is easily made with CompoNet. 

Wiring material cost can be reduced. 

Bit-level I/O distribution reduces, 

wiring in the system OMRON Transistor Remote I/O Terminals. 

A wide variety of CompoNet Slave Units, 

contribute to system size reduction. 

Seven-segment Display on the Gateway Unit, 

helps to detect errors on site OMRON Transistor Remote I/O Terminals. 

The Participation Flags and Communications, 

Error Flags can be checked at the Host, 

Controller to detect the location and, 

content of the error. Name: e-CON Connectors. 

Specifications: Outputs; 16 outputs; NPN; 

Without Short-circuit and, 

Disconnected Line Detection OMRON Transistor Remote I/O Terminals. 

"Easy" and "Flexible" system expansion, 

with linked CC-Link and CompoNet. 

Branching is easily made with CompoNet. 

Wiring material cosst can be reduced SRT2-ID16. 

Bit-level I/O distribution reduces, 

wiring in the system. 

A wide variety of CompoNet Slave Units, 

contribute to system size reduction. 

Seven-segment Display on the Gateway Unit, 

helps to detect errors on sitee OMRON SRT2-ID16. 

The Participation Flags and Communications, 

Error Flags can be checked at the Host, 

Controller to detect the location and, 

content of the error.

SRT2-ID16(-1)
SRT2-OD16(-1)

OMRON CJ1W-NC213

Basic Specifications

Item	Model
	CJ1W-NC113/133	CJ1W-NC213/233	CJ1W-NC413/433
Power supply  voltage	5 V DC (for the PCU itself)
	24 V DC (external power supply)
	5 V DC (external power supply; line driver output only)
Allowable power supply voltage  range	4.75 to 5.25 V DC (for the PCU itself)
	21.6 to 26.4 V DC (external power supply)		22.8 to 25.2 V DC  (external power supply)
	4.75 to 5.25 V DC (external power supply; line driver output only)
Internal current  consumption	250 mA max. at 5 V DC	250 mA max. at 5 V DC	360 mA max. at 5 V DC
Current  consumption of  external power  supply	NC113: 30 mA max. at 24 V DC NC133: 10 mA max. at 24 V DC NC133: 60 mA max. at 5 V DC	NC213: 50 mA max. at 24 V DC NC233: 20 mA max. at 24 V DC NC233: 120 mA max. at 5 V DC	NC413: 100 mA max. at 24 V DC NC433: 30 mA max. at 24 V DC  NC433: 230 mA max. at 5 V DC
External  dimensions	90 (H) × 31 (W) × 65 (D) (all models)
Weight	100 g max.	100 g max.	150 g max.
Ambient  operating  temperature	0 to 55 ° C		0 to 50 ° C *

Note: Specifications not listed above conform to CJ Series general specifications. 
* Refer to Operation Manual 3-3-5 Mounting Precaution for CJ1W-NC413/NC433 for information on the ambient operating 
  temperature of the CJ1W-NC413/433.

Performance Specifications

Item		Model
		CJ1W-NC113/133	CJ1W-NC213/233	CJ1W-NC413/433
Applicable PLC models		CJ-series PLCs *1
Unit type		Special I/O Unit
I/O requirements	Words	5 words	10 words	20 words
Controlled driver		Pulse-train input-type Servo Drive or stepping motor driver  NC113/213/413 models have open collector output.  NC133/233/433 models have line driver output.
Control	Control system	Open-loop control by pulse train output
	Number of control  axes	1 axis	2 axes	4 axes
Control unit		Pulse
Positioning operations		Two types: memory operation and direct operation
Positioning  operations	Independent	1 axis	2 independent axes	4 independent axes
	Linear interpolation	None	2 axes max.	4 axes max.
	Speed control	1 axis	2 independent axes	4 independent axes
	Interrupt feeding	1 axis	2 independent axes	4 independent axes
Positions	Range	-1,073,741,823 to 1,073,741,823 pulses *2
	Data items	100/axis
Speeds	Range	1 pps to 500 kpps
	Data items	100/axis
Acceleration and  deceleration times	Range	0 to 250 s, until maximum speed is reached.
	Data items	9/axis for acceleration and deceleration each
Functions and  settings	Origin search	Origin proximity input signal: selectable (absent, N.O. or N.C. contact).  Origin input signal: selectable (N.O. or N.C. contact)  Origin compensation: -1,073,741,823 to 1,073,741,823 pulses  Origin search speed: High-speed or proximity-speed can be set.  Origin detection method: May be set to stop upon origin input signal after proximity input  signal has turned ON, to stop upon origin input signal after proximity input signal has  turned OFF, to stop upon origin input signal without using proximity input signal, or to stop  upon origin input signal after limit input signal has turned OFF.  N.O. = Normally open  N.C. = Normally closed
	Jogging	Jogging can be executed at a specified speed.
	Dwell times	19/axis can be set from 0 to 9.99 s (unit: 0.01 s).
	Acceleration/  deceleration curves	Trapezoidal or S-curve (Can be set separately for each axis.)
	Zones	Zone Flag turns ON when present position is within a specified zone. Three zones can be  set for each axis.
	Software limits	Can be set within a range of -1,073,741,823 to 1,073,741,823 pulses.
	Backlash  compensation	0 to 9,999 pulses. Compensation speed can also be set.
	Teaching	With a command from the PLC, the present position can be taken as the position data.
	Deceleration stop	The STOP command causes positioning to decelerate to a stop according to the specified  deceleration time.
	Emergency stop	Pulse outputs are stopped by an external emergency stop command.
	Present position  preset	The PRESENT POSITION PRESET command can be used to change the present position  to a specified value.
	Override	When the override enabling command is executed during positioning, the target speed is  changed by applying the override coefficient. Possible to set to a value from 1 to 999% (by  an increment of 1%)
	Data saving	1) Saving to flash memory. (Can be written 100,000 times.)  2) Reading from PLC area by data reading instruction.  3) Reading by Support Software and saving to personal computer hard disk or floppy disk.
External I/O	Inputs	Prepare the following inputs for each axis:  CW and CCW limit input signals, origin proximity input signal, origin input signal, emergency  stop input signal, positioning completed signal, interrupt input signal
	Outputs	Prepare the following outputs for each axis:  Pulse outputs  CW/CCW pulses, pulse outputs and direction outputs can be switched.  Either error counter reset or origin-adjustment command outputs can be selected  depending on the mode.
Pulse output distribution period		1-axis operation: 4 ms  Linear interpolation: 8 ms
Response time		Refer to Operation manual Appendix A Performance Characteristics.
Self-diagnostic function		Flash memory check, memory loss check, CPU bus check
Error detection function		Overtravel, CPU error, software limit over, emergency stop

mitsubishi C200H-LK202-V1

Brand: OMRON 

Name: Host Link Module

Model: C200H-LK202-V1

Name: Host Link Module.

Model: C200H-LK202-V1.

Communication ports: 1 RS-422.

Model: C200H-OD219.

No. of points: 64 pts.

Specifications: 4.5 VDC, 16 mA to 26.4 VDC, 100 mA..

Weight: 250g max.Name: Position Control Module.

Model: C200HW-NC213.

Control method: Open-loop, automatic trapezoid acceleration/deceleration.

Control output sig-nals: Pulse-train outputs.

Controlled axes: 2 OMRON C200H-LK202-V1. 1 set (2 included).Model: C200H-OD211.

No. of points: 12 pts.

Specifications: 0 C200H-LK202-V13 A, 24 VDC.Model: C200H-ME831.

Description: EEPROM, 8K words, no clock.Name: Position Control Module.

Model: C200H-NC211.

Control method: Open-loop, automatic trapezoid acceleration/deceleration.

Control output sig-nals: Pulse-train outputs.

Controlled axes: 2.Model: C200H-OC222N.

No. of points: 12 pts.

Specifications: 2A, 250VAC/24VDC(For resistive loads) OMRON C200H-LK202-V1. Required when supplying backup power.

For 2 Units.1 axis, Pulse output. speeds: 1 to 100, 000 pps.ISA bus: support software.Model: C200H-BC031-V2.

No. of I/O slots: 3 slots.100 to 120/200 to 240 VAC (switchable), APF/PCF.UM: 15.2K words.

DM: 6K words.

EM: 6K words.

Instruction processing time (basic instructions): 0.15 µ.s min.

No. of I/O points: 880 points OMRON C200H-LK202-V1. 

Max. no.of connecting Expansion I/O Racks: 2 Racks.

Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.

Max. no. of con-necting Special I/O Units: 10.

RS-232C: NO.Model: C200HW-CORT21-V1 OMRON Host Link Module. 

C200HW C Communications CANopen Master / Slave Unit C200HWCORT21Capacity: 32K word.

Access time: 150ns.

When using SYSMAC-CPT, can not be written in EPROM OMRON Host Link Module. 

To write a program to the EPROM, use the standard PROM writer.

Before the EPPROM memory card into the CPU, to connect the EPROM to the EPROM memory card.

If you remove the EPROM memory card from the CPU,

Will not lose its data.Name: Temperature Control Module.

Model: C200H-TC001.

Sensor: Thermocouple: R, S, K(CA), J(IC), T(CC), E(CRC), B, N, L(IC), U(CC) OMRON Host Link Module. 

Control output: Transistor outputCConnects Power Supply Adapter and SYSMAC NET Link Unit C200H-LK202-V1. 

For 1 Unit.Model: C200HW-COM03-V1.

Specifications: One RS-422/485 port.Model: C200HW-ME08K.

Capacity: 8K words.For 8-slot Backplane.Model: C200H-OD218.

No. of points: 32 ptts OMRON C200H-LK202-V1. 

Specifications: nit 4.5 VDC, 16 mA to 26.4 VDC, 100 mA. .

Weight: 180g max.Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit.

OMRON CP1W-TS001

Product Details

CP1L Temperature Sensor Input Modules

By mounting a Temperature Sensor Unit to the PLC, inputs can be obtained from thermocouples or platinum resistance thermometers, and temperature measurements can be converted to binary data (4-digit hexadecimal) and stored in the input area of the CPU Unit. 

Omron CP1L CPU's, Expansion Modules and Accessories

Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers. 

Specifications

Attribute	Value
For Use With	PLC Module
Module Type	Input
Input Type	Analogue
Number of Inputs	2
Voltage Category	24 V dc
Length	90mm
Width	86mm
Depth	50mm
Dimensions	90 x 86 x 50 mm