HMI OMRON NS15-TX01B-V2

International Standards

• The standards are availabled as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Programmable Terminals

Product  name	Specifications				Model	Standards
	Effective display  area	Number  of dots	Ethernet	Case color
NS5-V2 *1	5.7-inch *2  TFT color  LED backlight	320 ×  240 dots	No	Ivory	NS5-SQ10-V2	UC1, CE, N,  L, UL Type4
				Black	NS5-SQ10B-V2
			Yes	Ivory	NS5-SQ11-V2
				Black	NS5-SQ11B-V2
	5.7-inch *2  High-luminance  TFT color  LED backlight		No	Ivory	NS5-TQ10-V2
				Black	NS5-TQ10B-V2
			Yes	Ivory	NS5-TQ11-V2
				Black	NS5-TQ11B-V2
NS8-V2	8.4-inch *2  TFT  LED backlight	640 ×  480 dots	No	Ivory	NS8-TV00-V2	UC1, CE, N,  L
				Black	NS8-TV00B-V2
			Yes	Ivory	NS8-TV01-V2
				Black	NS8-TV01B-V2
NS10-V2	10.4-inch *2  TFT  LED backlight	640 ×  480 dots	No	Ivory	NS10-TV00-V2	UC1, CE, N,  L, UL Type4
				Black	NS10-TV00B-V2
			Yes	Ivory	NS10-TV01-V2
				Black	NS10-TV01B-V2
NS12-V2	12.1-inch *2  TFT  LED backlight	800 ×  600 dots	No	Ivory	NS12-TS00-V2
				Black	NS12-TS00B-V2
			Yes	Ivory	NS12-TS01-V2
				Black	NS12-TS01B-V2
NS15-V2	15-inch  TFT	1,024 ×  768 dots	Yes	Silver	NS15-TX01S-V2
				Black	NS15-TX01B-V2
NSH5-V2 *1  Hand-held	5.7-inch  TFT	320 ×  240 dots	No	Black (Emergency  stop button: Red)	NSH5-SQR10B-V2	UC, CE
				Black  (Stop button: Gray)	NSH5-SQG10B-V2

*1. As of July 2008, the image memory has been increased to 60 MB. 

*2. Lot No. 15Z0 or later of NS5 color-type models, Lot No. 28X1 or later of NS8 models, Lot No. 11Y1 or later of NS10 

       models, Lot No. 14Z1 or later of NS12 models, Lot No. 31114K or later of NS15 models.

NS-Runtime

Product name	Specifications		Media	Model	Standards
NS-Runtime	NS-Runtime Installer, PDF manual, hardware key *	1 license	CD	NS-NSRCL1	---
		3 licenses		NS-NSRCL3
		10 licenses		NS-NSRCL10

Note: A hardware key (USB dongle) is required for NS-Runtime operation.

System Requirements

Item	Specifications
OS *	Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version)
CPU	Celeron, 1.3 GHz or higher (Recommended)
Memory size	HDD: 50 MB min., RAM: 512 MB min. (Windows 7: 1 GB min.).  50 MB is required for the Runtime alone. (An additional 280 MB is required if CX-Server is not already  installed.)

* Ver. 1.30 or later of NS Runtime do not support Windows XP (Service Pack 3 or higher) and Windows Vista.

Software

How to Select Required Support Software for Your Controller

The required Support Software depends on the Controller to connect. Please check the following table when purchasing the Support Software.

Item	Omron PLC System	Omron Machine Automation Controller System
Controller	CS, CJ, CP, and other series	NJ-series and NX-series
Programmable Terminals	NS-series	NS-series with an Ethernet port
Software	FA Integrated Tool Package CX-One	Automation Software Sysmac Studio

FA Integrated Tool Package CX-One

Product  name	Specifications			Model	Stand-  ards
		Number of  licenses	Media
FA Integrated  Tool Package  CX-One  Ver.4.[]	The CX-One is a comprehensive software  package that integrates Support Software  for OMRON PLCs and components.  CX-One runs on the following OS.  Windows XP (Service Pack 3 or higher,  32-bit version)/  Windows Vista (32-bit/64-bit version)/  Windows 7 (32-bit/64-bit version)/  Windows 8 (32-bit/64-bit version)/  Windows 8.1 (32-bit/64-bit version)/  Windows 10 (32-bit/64-bit version)  CX-One Version 4.[] includes CX-Designer  Ver.3.[].  For details, refer to the CX-One catalog  (Cat. No. R134)	1 license  *	DVD	CXONE-AL01D-V4	---

* Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product  name	Specifications			Model	Stand-  ards
		Number of  licenses	Media
Sysmac  Studio  Standard Edition  Ver.1.[]	The Sysmac Studio provides an integrated development environment to set up, program, debug, and maintain  NJ/NX Series CPU Units, NY-series Industrial PC,  Controllers and other Machine Automation Controllers,  as well as EtherCAT slaves.  Sysmac Studio runs on the following OS.  Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/  64-bit version)/Windows 8.1 (32-bit/64-bit version)/  Windows 10 (32-bit/64-bit version)  The Sysmac Studio Standard Edition DVD includes  Support Software to set up EtherNet/IP Units,  DeviceNet slaves, Serial Communications Units, and  Support Software for creating screens on HMIs (CX-  Designer).  Refer to your OMRON website for details.	-  (Media only)	DVD	SYSMAC-SE200D	---
		1 license  *	---	SYSMAC-SE201L	---

Note: To connect the NJ5 Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is 

          also required. 

          To connect the NJ1/NJ3 Controller, NS system version 8.61 or higher is required. CX-Designer version 3.4 or higher 

          is also required. 

          To connect the NX7 Controller, NS system version 8.9 or higher is required. CX-Designer version 3.64 or higher is 

          also required. 

          To connect the NX1 controller, NS system version 8.96 or higher is required. CX-Designer version 3.70 or higher is 

          also required. 

          To connect the NX1P controller, NS system version 8.93 or higher is required. CX-Desiner version 3.70 or higher is 

          also required. 

* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).

Cable

Product name		Specifications		Model	Stand-  ards
Cable  *1		Screen transfer cable for DOS/V  (CX-Designer ↔ PT)	Length: 2 m	XW2Z-S002	---
		USB-Serial Conversion Cable	Length: 0.5 m	CS1W-CIF31	N
		USB relay cable	Length: 1 m	NS-USBEXT-1M	---
NSH5 Cables		RS-422A cable (loose wires + D-Sub 9-pin)	Length: 10 m	NSH5-422CW-10M
		RS-232C cable (loose wires + D-Sub 9-pin)	Length: 3 m	NSH5-232CW-3M
		RS-232C cable (loose wires + D-Sub 9-pin)	Length: 10 m	NSH5-232CW-10M
UL-compliant NSH5  Cable		RS-422A cable (loose wires)	Length: 10 m	NSH5-422UL-10M	CU
		RS-232C cable (loose wires + relay cable)	Length: 3 m	NSH5-232UL-3M
		RS-232C cable (loose wires + relay cable)	Length: 10 m	NSH5-232UL-10M
PT-to-PLC  Connecting Cable *2		PT connection: 9 pins  PLC connection: 9 pins	Length: 2 m	XW2Z-200T	---
			Length: 5 m	XW2Z-500T
		PT connection: 9 pins  PLC peripheral port	Length: 2 m	XW2Z-200T-2
			Length: 5 m	XW2Z-500T-2
NSH5 Removable Box  Cable		RS-232C Cable (connectors)	Length: 3 m	NSH5-232CN-3M
			Length: 10 m	NSH5-232CN-10M
NSH5 Removable Box		---		NSH5-AL001
NSH5 Wall-mounting  Bracket		---		NSH5-ATT02
NSH5 Visor		---		NSH5-ATT01

*1. Use a standard USB Type A male to Type B type male Cable to connect the NS series PT to a personal computer 

       (CX-Designer). 

       We recommend that you use a USB cable with a ferrite core attached to ensure stable communications. 

       (Examples: FH-VUAB from OMRON and U2C-BF series (US2-BF[][]BK) from ELECOM as of February 2016) 

       Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends 

       on the printer. 

*2. To connect the NS series PT to NJ series Controller, using a commercially available 10/100-BASE-TX twisted-pair 

       cable. 

       For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).

Options

Product name		Specifications		Model	Stand-  ards
Video  Input  Unit		Inputs: 4 channels  Signal type: NTSC/PAL		NS-CA001	UC1, CE
		Input channels: 2 video channels and 1 RGB channel *1  Signal type: NTSC/PAL		NS-CA002
Controller  Link  Interface  Unit		For Controller Link Communications		NS-CLK21	UC1, CE
RS-422A  Adapter		Transmission distance: 500 m total length  Note: Use this model when connecting PT models without  a V[] suffix.  Note: PT models with the V[] suffix can also be connected.		NS-AL002	---
		Transmission distance: 50 m total length  Note:  Only PT models with a suffix of V[] are connectable.  Use the NS-AL002 to connect models without a V[] suffix.		CJ1W-CIF11	UC1, N,  L, CE
Sheet/  Cover  *2		Anti-reflection Sheets  (5 surface sheets)	NS15	NS15-KBA04	---
			NS12/10	NS12-KBA04
			NS8	NS7-KBA04
			NS5	NT30-KBA04
		Protective Covers (5 pack)  (anti-reflection coating)	NS12/10	NS12-KBA05
			NS8	NS7-KBA05
			NS5	NT31C-KBA05
		Protective Covers (1 cover included)  (Transparent)	NS15	NS15-KBA05N
		Protective Covers (5 covers included)  (Transparent)	NS12/10	NS12-KBA05N
			NS8	NS7-KBA05N
			NS5	NT31C-KBA05N
Attachment		NT625C/631/631C Series to NS12/10 Series		NS12-ATT01
		NT625C/631/631C Series to NS12/NS10 Series (Black)		NS12-ATT01B
		NT610C Series to NS12/10 Series		NS12-ATT02
		NT620S/620C/600S Series to NS8 Series		NS8-ATT01
		NT600M/600G/610G/612G Series to NS8 Series		NS8-ATT02
Memory  Card		128 MB		HMC-EF183
		256 MB		HMC-EF283
		512 MB		HMC-EF583
Memory Card Adapter		---		HMC-AP001	CE
Replacement Battery		Battery life: 5 years (at 25°C)		CJ1W-BAT01	---
Bar Code Reader *3		CCD handheld bar code reader (RS-232C interface)		V520-RH21-6

HMI MITSUBISHI GT1685M-STBD

Brand: MITSUBISHI Name: 15 Inch Touch ScreenModel: GT1685M-STBDSeries: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 15 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
Applicable model: A985GOT (-V).Function: high performance and low price in the middle end model.
Picture size: 10.4 inches.
Resolution: SVGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
The highest level model with multi touch and gesture features.
Specification rich, design at ease.
GT27 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface MITSUBISHI GT1685M-STBD GT1685M-STBD
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
In addition, also supports video, animation playback, video input and RGB input and output, can use all the features of GOT2000 MITSUBISHI GT1685M-STBD.
Can be programmed CPU and other procedures, parameters, such as data storage (backup) to the SD GOT memory card, USB memory.
When the programmable controller fails, batch write back (recovery) program.
1, the human body sensor
People will be able to automatically detect and display the picture.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, USB interface: host USB (USB-A)
GOT data can be transmitted through the USB memory or read log data and other data,
Can also be connected to the USB mouse, keyboard use MITSUBISHI GT1685M-STBD.
4, the extension of the interface
Communication module and optional module can be installed MITSUBISHI 12.1 Inch Touch Screen.
5, Ethernet interface
Up to 4 different manufacturers can be connected to the FA machine.
6, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer MITSUBISHI 12.1 Inch Touch Screen.
7, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
8, SD memory card slot
Can save alarm and log data, such as a large number of data. Function: high performance and low price in the middle end model.
Picture size: 8 MITSUBISHI 12.1 Inch Touch Screen. 4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
The highest level model with multi touch and gesture features.
Specification rich, design at ease.
GT27 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
In addition, also supports video, animation playback, video input and RGB input and output, can use all the features of GOT2000.
Can be programmed CPU and other procedures, parameters, such as data storage (backup) to the SD GOT memory card, USB memory.
When the programmable controller fails, batch write back (recovery) program.
1, the human body sensor
People will be able to automatically detect and display the picture.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, USB interface: host USB (USB-A)
GOT data can be transmitted through the USB memory or read log data and other data,
Can also be connected to the USB mouse, keyboard use.
4, the extension of the interface
Communication module and optional mmodule can be installed GT1685M-STBD.
5, Ethernet interface
Up to 4 different manufacturers can be connected to the FA machine.
6, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
7, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader MITSUBISHI GT1685M-STBD.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.

HMI WEINVIEW MT8101IE

SPECIFICATION
Display: 10.1 TFT
Brightness: 300 cd/m2
Color: 262K
Contrast Ratio: 500:1
Resolution (WxH dots): 800 x 480
Back light: LED
Backlight life time (avg.): >30,000 hrs
Touch panel: 4 wires resistive type
USB Host :USB 2.0 x 1
Processor: 32 bits RISC Cortex-A8 600MHz
Flash memory: 128MB
Enclosure: Plastic
Dimensions WxHxD: 271 x 213 x 40 mm
Panel cutout dimension: 260 x 202 mm

Berhasil menyimpan template chat

Template berhasil di hapusBatalkan

Oops, terjadi kendala koneksi.Coba La

HMI WEINVIEW MT8102IE

Remarks：

MT8102iE/MT8103iE’s COM3 can either use RS-485 or RS-232. However, only Tx & Rx (no RTS/CTS) may be used for COM1 RS232 when COM3 RS-232 is also used

MT8100iE/MT8101iE/MT8102iE/MT8103iE COM Port Pin-out Comparisons

HMI WEINVIEW MT8071IP

Speksifikasi 

Display:7inch TFT LCD
Resolution:800 x 480
Colors:16M
Flash:128 MB
RAM:128 MB
Processor:32 Bits RISC Cortex-A8 600MHz
USB Host:USB 2.0 x 1
Ethernet:10/100 Base-T x 1
COM Port:COM1: RS-232, COM2: RS-485 2W/4W
RS-485 Dual Isolation:N/A
Input Power:2420% VDC
Power Consumption:500mA@24VDC
Dimensions WxHxD:200.4 x 146.5 x 34 mm
Panel Cutout:192 x 138 mm

HMI WEINVIEW/WEINTEK TK6070IP

Weinview/Weintek 7 inch PLC HMI TK6070IP TK6070IP 1WV TK6070IP1WV PB68Description:
WEINVIEW HMI port can communicate with most of the equipment, Especially Allen-Bradley,Omron,Mitsubishi,Siemens,LG,Modicon,Ge,Fanuc,SNP-X,Delta,Facon,Liyan Ex Series,Matsushita ,IDEC ,Keyence Kv Series ,Toshiba T Series , Koyo,Vigor, Yokogawa Fa-M3,Parker Compax3, Saia Pcd S-Bus Mode ,Sew Eurodrive Movitrac , Baumuller Servo ,Heng Yuan Sensor and so on.
SPEK:
Monitor:7 TFT
Resolution(WxH dots):800x480
Brightness(cd/m2):350
Backlight type:LED
Backlight service life:>30,000 hours
Display colors:65536 types
Type:Four-wire analog resistance type
Touch precision:Active Area Length(X)2%,Width(Y)2%
Flash RAM(MB):128
DRAM:64
Processor:32 Bit RISU CPU 400MHz
Mini USB downloading port:USB2.0 X 1
COM connectivity port:COM 1 RS-232, COM 2 RS-485 2W/4W
Calendar:Built-in
Input power:2420%VDC
Power dissipation:350mA@24V
Isolated power supply:None
Pressure-proof:500 VAC(per min)
Insulating resistance:Over 500MW at 500 VDC
Quake-proof:10 to 25Hz(Direction X,Y,Z 2G 30 mins)
Sheathing material:Industrial plastics
Outside measurement WxHxD:200.4 x 146.5 x 34mm
Opening size(mm):192 x 138
Protection level:IP65 front panel protection
Storage Temperature:-200~ 600(-40~ 1400F)
Operating Temperature:00~ 500C(320~ 1220F)
Operating Humidity:10% ~ 90%(No condensation)

OMRON CS1W-DRM21-V1

Brand: OMRON 

Name: DeviceNet Unit

Model: CS1W-DRM21-V1

Product: DeviceNet Unit. 

Specifications: For CS Series, 

Functions as either a master or a slave. 

2,048 I/O points. 

Standards: UC1, N, L, CE. 

A DeviceNet Unit for the CS Series. 

That Boasts Industry-leading. 

Performance and Functions.

Unit type: CS1 Special I/O Units. 

Product name: Isolated-type, 

Thermocouple Input Units. 

points Input: 4 inputs. 

Signal range selection: 

Set separately for each input. 

I/O type: R, S, K, J, T, L, B. 

Conversion speed: 250 ms/4 inputs. 

Externa connection: Removable erminal block. 

No. of unit numbers allocated: 1 OMRON CS1W-DRM21-V1. 

Current consumption: 5V, 0.25A; 26V, --. 

Standards: UC1, CE CS1W-DRM21-V1 

Provides the functionality of isolators, 

power supplies, signal converters, 

and other devices. 

The Analog Input Unit converts analog, 

input signals such as 1 to 5 V or 4 to 20mA, 

into digital values, and takes the values, 

scaled in industrial units, and transfers, 

it to the CPU Unit as the process value OMRON CS1W-DRM21-V1. 

Because of this, no ladder program is required, 

at the CPU Unit for scaling.

The Analog Output Unit converts analog output set, 

values from the CPU Unit to analog output signals, 

such as 4 to 20 mA or 1 to 5 V, and outputs them. 

The built-in functions, such as measurement value, 

alarms, rate-of-change calculations, and square roots, 

have enabled major savings in cost and space compared, 

with previous systems OMRON CS1W-DRM21-V1. 

High-resolution Models and 8-point Input Models are, 

also available. 

By combining the Units, logging/monitoring. 

systems can be constructed, 

or the Units can be used together with LCBs/LCUs, 

to construct complete process control systems OMRON DeviceNet Unit. 

Parameters can be easily displayed and set in an, 

easy-to-understand form without special tools. Unit type: CS-series Special I/O Units OMRON DeviceNet Unit. 

Product name: Analog Input Units. 

Specifications: I/O points, 4 inputs; 

Signal range selection, 

Set separately for each input; 

Signal range, 1 to 5 V, 0 to 5 V, 

0 to 10 V, -10 V to 10 V, 4 to 20 mA; 

Resolution, 1/8,000 (Settable to 1/4,000); 

Conversion speed, 250 s/point max OMRON DeviceNet Unit. 

(Settable to 1 ms/point). 

Externa connection, Removable terminal block. 

Current consumption: 5V, 0.12A; 26V, 0.09A. 

Standards: UC1, N, CE. 

For Various Analog I/Os. 

Analog Input Units for converting, 

analog input signals into binary data. 

Analog Output Units for converting , 

binary data into analog output signals. Unit type: CS1 Basic I/O Units. 

Product name: DC Input/Transistor Output Unit. 

Specifications: 24 VDC, 6 mA 32 inputs. 

Mountable Racks: CPU Rack, CS1W-BC, 

@@3, Yes, @@2, Yes; 

C200HX/HG/HE Exxpansion I/O Rack, No CS1W-DRM21-V1. 

CS1 Expansion Rack, CS1W-BI, 

@@3, Yes, @@2, Yes; 

CS1 Long distance Expansion Rack, Yes; 

SYSMAC BUS Slave Rack, No. 

Words required: 2 input words and 2 output words. 

Current consumption: 5V system, 0.227A; 

26 V system, -- OMRON CS1W-DRM21-V1. 

Standards: U, C, N, L, CE. 

Multi-application Controllers: 

From High-performance Machine C, 

Highly Reliable Process Control.

MITSUBISHI Q172CPUN

Brand: MITSUBISHI Name: Motion CPU moduleModel: Q172CPUNControl axis: maximum 8 axes.
Greater flexibility.
PLC control and motion control using independent CPU, optimize the system configuration.
More than 4 CPU modules can be freely selected in multi CPU system.
MITSUBISHI SSCNET control function.
By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.
The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified.
Each 1 CPU can control up to 32 axes at the same time.
Can control the small capacity from 10W to 55KW large capacity servo motor.
Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring.
FL-net (OPCN-2) Ver.2.00 interface.
10BASE2 use.
Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module.
The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet MITSUBISHI Q172CPUN.
Realize the previous communication method can not achieve the detailed control of data transmission,
Real time data analysis using user applications,
In order to provide support for improving production efficiency and equipment value Q172CPUNOptimal network matching for application purposes and applications,
Seamless communication between different hierarchical systems MITSUBISHI Q172CPUN.
Enhancing the ability of information communication through network.
This is also a major task in the field of automation.
Network environment provided by Q series
Is truly open & seamless.
Including based on universal ethernet,
Achieve easy management of the environment "IE Control CC-Link" controller network,
As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Q172CPUN.
Also including Japan''s first, to achieve the world standard,
And get the SEMI certification of the field network "CC-Link",
And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Motion CPU module.
And support sensor networks "AnyWire",
To enrich the lineup flexibility to integrate the various layers of automation network MITSUBISHI Motion CPU module. Input points: 32 points.
Input voltage and current: 4mA DC24V.
Response time: 1/5/10/20/70ms.
32 points and 1 common ends.
Common anode.
Output points: 32 points.
Output voltage and current: DC12-24V; 0.1A/ point; 2A/ common.
Response time: 1ms.
1 point 32 public end, leakage type; 40 pin connector MITSUBISHI Motion CPU module.
With thermal protection.
With short circuit protection.
With the surge absorber.
With the help of sample tracking function, the starting time is shortened
By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,
Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.
In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.
Can be used to analyze the data collected by programming tools,
In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.
And the sampling tracking results can be stored in LogViewer GX form CSV,
By recording data display and analysis tool LogViewer GX to display.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming.
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area.
The address register is extended to 32 bits, which can be programmed to go beyond the traditioonal 32K word,
And to achieve the extension to the file register to all regions of the file register Q172CPUN.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured daata (array),
The speed has been improved MITSUBISHI Q172CPUN.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

MITSUBISHI Q64TDV-GH

Brand: MITSUBISHI 

Name: Thermocouple type temperature input module

Model: Q64TDV-GH

Input: 4 channels.

Thermocouple (C1602~1995 JIS).

Micro voltage (-100mV~100mV).

Conversion speed: (sampling period x3) /1 channel.

18 point terminal station.

Most suitable for process control of isolated analog modules.

Temperature data can be collected by connecting thermocouple / thermal resistance.

Products can choose multi-channel (8 channel) input type and channel isolation type.

Customers can choose the most suitable model according to the intended use.

Auto backup key data

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters due to forgetting to replace the battery.

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and other planned downtime,

The data is lost due to battery depletion.

The next time the power is turned on, the backup data will be automatically restored.

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance.

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown. 

Q series of basic conversion module, A series of additional basic unit connection adapter unit.

Suitable for: A5 - B/A6 - B.Positioning: 3 axis, built-in counter function, open collector output type.

Control unit: pulse.

Number of location data: 1/ axis.

Maximum output pulse: 100Kpps.

Counter: 3 channels MITSUBISHI Q64TDV-GH. 

100Kpps.

Counter input signal: DV5~24V.

40 pin connector.

Positioning control using encoder feedback, especially suitable for conveying system and processing machinery, etc Q64TDV-GH.

In the 1 single module, the 3 axis positioning function and the 3 channel counter function are integrated.

Positioning module, high-speed counter module combined as a whole,

Can effectively use the board slot and save space MITSUBISHI Q64TDV-GH. Express PCI bus.

Support Japanese, English OS.

Multimode fiber optic cable.

Dual loop controller network (control station / common station).

With external power supply function.

Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.

Using Ethernet cables and connectors available on the market to reduce costs.

High speed communication capable of communicating with 1Gbps MITSUBISHI Q64TDV-GH. 

Improve the communication response, significantly shorten the cycle time.

Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.

Data can be read or written to other station programmable controller MITSUBISHI Thermocouple type temperature input module. 

Status of IE CC-Link field network can be confirmed by Works2 GX.

Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,

So it can reduce the time of abnormal to resume normal operation MITSUBISHI Thermocouple type temperature input module. 

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station MITSUBISHI Thermocouple type temperature input module. 

Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.

The distance betweenn stations, the length of the total cable length, strong anti-interference Q64TDV-GH. 

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI Q64TDV-GH. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.

MITSUBISHI QJ71GF11-T2

Brand: MITSUBISHI 

Name: IE CC-Link field network

Model: QJ71GF11-T2

Master / local station sharing.

IE CC-Link field network.

Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.

Using Ethernet cables and connectors available on the market to reduce costs.

High speed communication capable of communicating with 1Gbps.

Improve the communication response, significantly shorten the cycle time.

Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.

Data can be read or written to other station programmable controller.

Status of IE CC-Link field network can be confirmed by Works2 GX.

Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,

So it can reduce the time of abnormal to resume normal operation.

QJ71GF11-T2 can be used as the main station / local station of IE CC-Link field network.

Control axis: maximum 8 axes.

Teaching running function: there (when using SV13).

To stop the speed control function at the specified location.

The servo motor can rotate at a predetermined speed,

After starting the specified location to stop the instruction,

Can be set in advance to stop the location MITSUBISHI QJ71GF11-T2. 

You can change the speed by changing the value of the options at the time of the operation,

You can also change the acceleration / deceleration time QJ71GF11-T2

Phase compensation function.

The mixed function of virtual mode and real mode.

Smooth clutch linear acceleration / deceleration function.Output points: 16 points.

Output voltage and current: 24V/AC240V 2A/1; DC point; 8A/1 common end.

Response time: 12ms MITSUBISHI QJ71GF11-T2. 

16 points / a common end.

18 point spring clip connection terminal.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users MITSUBISHI QJ71GF11-T2. 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location MITSUBISHI IE CC-Link field network. 

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI IE CC-Link field network. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI IE CC-Link field network. 

Easy connection programming tool via ethernet.

Programming tools (Works2 GX,, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings QJ71GF11-T2. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method annd the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QJ71GF11-T2. 

PLC YASKAWA JAMSC-B2742

JAMSC-B2742

PLC YASKAWA JAMSC-IF60

JAMSC-IF60

PLC YASKAWA JAMSC-B2902

JAMSC-B2902

MITSUBISHI A62DA

Brand: MITSUBISHI Name: Analog output moduleModel: A62DA2 channels.
Input: DC-10 ~ 10V, DC4 ~ 20mA.
Output (resolution): -2000 ~ 2000, -1000 ~ 1000.
Transform speed: 15ms/2 channel.
20 point terminal station.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register.
And then combine the data and the program with CPU.
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.
The working process of the input interface circuit: when the switch is closed, the diode light,
The transistor is then guided to the internal circuit and input signal under the irradiation of the light.
When the switch is off, the diode does not emit light, and the transistor is not on the way. Internal circuit input signal.
It is through the input interface circuit to the external switch signal into PLC internal can accept the digital signal.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
G1-62.5/125 fiber optic cable.
Double loop.
PC inter network (management station / station) / remote I/O network (remote control station).
How to choose MITSUBISHI PLC.
MITSUBISHI PLC options include the choice of MITSUBISHI PLC models, capacity, I/O module, power, etc..
MITSUBISHI PLC distribution I/O points and design MITSUBISHI PLC peripheral hardware circuit
Draw the I/O point of the PLC and the input / output device connection diagram or the corresponding table,
This part also can be carried out in second steps MITSUBISHI A62DA A62DA
Design PLC peripheral hardware circuit.
Draw the electrical wiring diagram of the other parts of the system,
Including the main circuit and the control circuit does not enter the PLC, etc MITSUBISHI A62DA. .
The electrical schematic diagram of the system composed of I/O PLC connection diagram and PLC peripheral electrical circuit diagram.
So far the system''s hardware electrical circuit has been determined. Large capacity battery.3C-2V/5C-2V coaxial cable.
Double loop.
PC inter network (management station / common station) / remote I/O network (remote control station).
How to choose MITSUBISHI PLC MITSUBISHI A62DA.
MITSUBISHI PLC options include the choice of MITSUBISHI PLC models, capacity, I/O module, power, etc..
MITSUBISHI PLC distribution I/O points and design MITSUBISHI PLC peripheral hardware circuit
Draw the I/O point of the PLC and the input / output device connection diagram or the corresponding table,
This part also can be carried out in second steps MITSUBISHI Analog output module.
Design PLC peripheral hardware circuit MITSUBISHI Analog output module.
Draw the electrical wiring diagram of the other parts of the system,
Including the main circuit and the control circuit does not enter the PLC, etc..
The electrical schematic diagram of the system composed of I/O PLC connection diagram and PLC peripheral electrical circuit diagram.
So far the system''s hardware electrical circuit has been determined MITSUBISHI Analog output module. Enter points: 64 points.
Voltage: DC12/24V.
Current: 3/7mA.
Response time: 10ms.
32 points / a common end.
Cathode common.
40 pin connector.
System program memory for storing system program,
Including management procedures, monitoring procedures, as well as the user program to do the compiler to compile the process of interpretation.
Read only memory. Manufacturers use, content can not be changed, power does not disappear.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.
Each scanning process. Focus on the input signal sampling. Focus on the output signal to refresh.
Input refresh process. When the input port is closed,
Program in the implementation phase, the input end of a new state, the new state can not be read.
Only when the program is scanned, the new state is read.
A scan cycle is divided into the input sample, the program execution, the output refresh.
The contents of the coomponent image register are changed with the change of the execution of the program A62DA.
The length of the scan cycle is determined by the three.
CPU the speed of executing instructions.
Time of instruction.
Instruction count.
Due to thhe adoption of centralized sampling MITSUBISHI A62DA.
Centralized output mode.
There exist input / output hysteresis phenomena, i.e., the input / output response delay

MITSUBISHI MR-J4-200A4

MR-J4-200A4

HMI MITSUBISHI GT2308-VTBA

Condition	New
Weight (kg)	1.5
Our Part Number	GT2308VTBA
Height (mm)	194
Width (mm)	241
Depth (mm)	52
Brand	Mitsubishi
Manufacturer Range	GOT
Manufacturer Series	GOT 2000
Supply Voltage (AC)	100-240 V
IP Rating	IP67
IP Rating Back	IP20
Display Colour	65536
Display Resolution	640 x 480
Display Size	8.4"
Display Type	TFT
Backlighting	Yes
Internal Memory (Mb)	9
Keyboard Type	Touch Screen
Screen Aspect	Landscape
Short Description	Mitsubishi GT2308-VTBA 8.4 Vga TFT, 65k Colour Graphic Operator Terminal, 640x480 Pixel Touch Screen, With Ethernet, RS232 And RS422/485, USB (Host And Device) Connections, Plus Sd Memory Card Slot.

MITSUBISHI FX1N-14MT-ES/UL

• Manufacturer: Mitsubishi Electric
• FX1N-14MT-ES/UL
• FX1N Main Modules 
• Input : 8 
• Type: 24V DC Sick/Source 
• Output 
• Qty: 6(8) 
• Type : Transistor 
• Power Supply :12 V DC -15% to 24V DC +20% 
• Dimensions(mm) : 90 x 90 x 75 

YASKAWA JAMSC-B2603

YASKAWA JAMSC-120DRA84300

YASKAWA  JAMSC-120DRA84300