MITSUBISHI Q68AD-G

Brand: MITSUBISHI 

Name: Voltage / current input analog module

Model: Q68AD-G

8 channel.

Input: DC-10~10mA; 0~20mA.

Output (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; 0~16000; -16000~16000.

Conversion speed: 10ms/ channel.

40 pin connector.

Isolation between channels.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

Input voltage range: AC100-120V.

Output voltage: DC5V.

Output power: 6A.

Simplified program debugging.

Can use the software with the implementation of the conditions of the test function, any step in the program,

Changes the value of the soft component to a user specified value.

In the past, when debugging the specific loop process, the need to add a set of soft components of the program,

At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action MITSUBISHI Q68AD-G 

Therefore, do not need to change the program separately in order to debug, debugging operation is more simple.

Through the expansion of soft components, more convenient to create the program MITSUBISHI Q68AD-G. 

M soft components and B soft components can be expanded to 60K points, making the program easier to understand.

Auto backup key data.

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters due to forgetting to replace the battery.

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and other planned downtime,

The data is lost due to battery depletion MITSUBISHI Q68AD-G. 

The next time the power is turned on, the backup data will be automatically restored.Control axis: maximum 32 axes.

Manual pulse generator operation function: can use 3 sets of manual pulse generator MITSUBISHI Voltage / current input analog module. 

Synchronous encoder operation function: can use 12 synchronous encoder MITSUBISHI Voltage / current input analog module. 

Peripheral I/F: by CPU PLC.

High speed motion control system based on multi CPU architecture.

Multi CPU system based on Q series PLC.

Flexible selection of CPU PLC and motion CPU according to different applications.

In the construction of multi CPU system, can have up to 4 sets of CPU MITSUBISHI Voltage / current input analog module. 

When 3 Q173DCPU is used, the maximum 96 axes can be controlled.Extended SRAM card 1MB.

Support SD memory card.

High speed universal QCPU support SD memory card,

In order to be able to have a memory card portt between SD and PC to easily realize data exchange Q68AD-G. 

In addition, the SD memory card and the extended SRAM card can be used simultaneously.

Therefore, the extension of the file register using the extended SRAM card,

SD memory cardd can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation MITSUBISHI Q68AD-G. 

MITSUBISHI Q66AD-DG

Brand: MITSUBISHI 

Name: Current input analog module

Model: Q66AD-DG

8 channel.

Input: DC4~20mA.

Output (resolution): 0~6400; 0~3200.

Conversion speed: 10ms/ channel.

18 point terminal station.

Isolation between channels.

Power supply to a two wire transmitter.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 100 K step.

Processing speed: 0.0095 s.

Program memory capacity: 400 KB.

Support USB and network.

Support installed memory card.

Providing high speed communication between multiple CPU.

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Q66AD-DG. 

The minimum interval of the fixed period interrupt program is reduced to 100 s Q66AD-DG

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control MITSUBISHI Q66AD-DG. 

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control.8 axes.

Connect SSCNET III.

Control unit: pulse.

Location data: 32 data / axis MITSUBISHI Q66AD-DG. 

Ideal solution for simple multi axis positioning.

A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.

The multi axis system is most suitable for simple positioning control.

Ideal selection for high speed linear positioning control in multi axis system MITSUBISHI Current input analog module. 

Linear interpolation operation with up to 4 axes can be carried out MITSUBISHI Current input analog module. 

With the electronic gear, gap compensation, absolute position system, such as basic positioning function. Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Source type MITSUBISHI Current input analog module. 

18 point spring clip connection terminal.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module Q66AD-DG. 

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily diisplayed MITSUBISHI Q66AD-DG. 

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display

MITSUBISHI Q64AD-GH

Brand: MITSUBISHI 

Name: Voltage / current input analog module

Model: Q64AD-GH

4 channel.

Input: DCO~20mA DC-10~10V.

Output (resolution): 0~32000; -32000~32000; 0~64000; -64000~64000.

Conversion speed: 10ms/4 channel.

18 point terminal station.

Isolation between channels.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

SRAM memory card; capacity: 4M bytes.

Support SD memory card.

High speed universal QCPU support SD memory card,

In order to be able to have a memory card port between SD and PC to easily realize data exchange.

In addition, the SD memory card and the extended SRAM card can be used simultaneously.

Therefore, the extension of the file register using the extended SRAM card,

SD memory card can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation MITSUBISHI Q64AD-GH 

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording MITSUBISHI Q64AD-GH. 

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording.

Better user experience data recording function.

Easy to record, no need to program.

Simply through the special configuration tool wizard to easily complete the settings,

The collected data can be saved in CSV format to SD storage card MITSUBISHI Q64AD-GH. 

Can be effectively used to save the CSV file to facilitate the creation of a variety of reference materials,

Including daily reports, generate reports and general reports.

These data can be applied to the data analysis, tracing, etc..

To record the change of control data without missing.

Data can be collected in a time interval or in a millisecond time interval,

To record the change of the specified control data without any omission MITSUBISHI Voltage / current input analog module MITSUBISHI Voltage / current input analog module. 

Therefore, in the event of failure, can quickly determine the cause, the precise action analysis.Connect to read and write 1Ch.

ID system interface module.

ID controller M-688-001/002 BIS can be installed directly to the Q series of substrates,

Control module for reading and writing ID tag data through a programmable logic controller MITSUBISHI Voltage / current input analog module. 

The ladder diagram of M-6888-002 BIS is compatible with QD35ID1/2 Q64AD-GH. 

2 antennas can be connected, and the parallel processing of the 2 channels can be simultaneously carried out.

Can use all ID tags in the M BIS series.

ID series /BIS system is an industriaal automation ID system which can use the electromagnetic combination method to read and write data MITSUBISHI Q64AD-GH. 

ID tag has a variety of sizes and storage capacity.

MITSUBISHI Q62AD-DGH

Brand: MITSUBISHI 

Name: Current input analog module

Model: Q62AD-DGH

2 channel.

Input: DC4~20mA (connecting two wire transmitter); DC0~20mA.

Output (resolution): 0~4000. 0~12000.

Conversion speed: 10ms/ channel.

40 pin connector.

Isolation between channels.

Power supply to a two wire transmitter.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

GI-50/125 optical cable.

Double ring.

Remote I/O net (remote master station).

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station MITSUBISHI Q62AD-DGH. 

Optical fiber loop system Q62AD-DGH ..... High speed communication of 10Mbps/25Mbps is realized.

The distance between stations, the length of the total cable length, strong anti-interference.

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI Q62AD-DGH. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.Adapter for mounting DIN guide rail.

For Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, Q63B.Input voltage range: AC100-240V.

Output voltage: DC5V.

Output power: 8.5A.

Simplified program debugging.

Can use the software with the implementation of the conditions of the test function, any step in the program,

Changes the value of the soft component to a user specified value MITSUBISHI Q62AD-DGH. 

In the past, when debugging the specific loop process, the need to add a set of soft components of the program,

At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action MITSUBISHI Current input analog module. 

Therefore, do not need to change the program separately in order to debug, debugging operation is more simple MITSUBISHI Current input analog module. 

Through the expansion of soft components, more convenient to create the program.

M soft components and B soft components can be expanded to 60K points, making the program easier to understand.

Auto backup key data.

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters duue to forgetting to replace the battery MITSUBISHI Current input analog module Q62AD-DGH. 

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and oother planned downtime,

The data is lost due to battery depletion MITSUBISHI Q62AD-DGH. 

The next time the power is turned on, the backup data will be automatically restored.

MITSUBISHI QY81P

Brand: MITSUBISHI 

Name: Transistor output module (source)

Model: QY81P

Output points: 32 points.

Output voltage and current: DC12~24V; 0.1A/ point; 2A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

32 points and 1 common ends.

Source type.

40 pin connector.

With heat protection.

With the surge absorber.

With fuse.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 30 K step.

Processing speed: 0.02 s.

Program memory capacity: 120 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing MITSUBISHI QY81P. 

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0  QY81P 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula MITSUBISHI QY81P. 

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.Output: 2 channels.

Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000.

Output: DC-10~10V; DC0~20mA MITSUBISHI QY81P. 

Conversion speed: 80 s/1 channel.

18 point terminal station.

Transformer isolation between power supply and output.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required MITSUBISHI Transistor output module (source). 

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module MITSUBISHI Transistor output module (source). 

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control MITSUBISHI Transistor output module (source). 

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module QY81P. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of thee positioning of the industry, the control needs of various fields MITSUBISHI QY81P. 

Can also be used in combination with the CPU module to achieve appropriate control. 

MITSUBISHI QY80-TS

Brand: MITSUBISHI 

Name: Transistor output module (spring clip terminal)

Model: QY80-TS

Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Source type.

18 point spring clip connection terminal.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 40 K step.

Processing speed: 0.0095 s.

Program memory capacity: 160 KB.

Support USB and network.

Support installed memory card.

Providing high speed communication between multiple CPU.

Shorten the fixed scan interrupt time, high precision device MITSUBISHI QY80-TS. 

The minimum interval of the fixed period interrupt program is reduced to 100 s QY80-TS

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control MITSUBISHI QY80-TS. 

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control.8 axis, differential drive output type.

Control unit: pulse MITSUBISHI QY80-TS. 

Location data: 10 data / axis.

Maximum pulse output: 4Mpps.

40 pin connector.

Differential output.

Ideal solution for simple multi axis positioning.

Perfect match with stepper motor control.

Plus deceleration smooth, speed change subtle.

To speed up the speed of positioning control to start processing.

Positioning module.

Open collector output MITSUBISHI Transistor output module (spring clip terminal). 

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types MITSUBISHI Transistor output module (spring clip terminal). 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps MITSUBISHI Transistor output module (spring clip terminal). )

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Thhrough regular backup, can be the latest parameters, procedures, etc QY80-TS. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage ccard in advance MITSUBISHI QY80-TS. 

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown.

MITSUBISHI QY80

Brand: MITSUBISHI 

Name: Transistor output module (source)

Model: QY80

Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A/ common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Source type.

18 point terminal station.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Input: 8 channels.

30kpps/10kpps/1kpps/100pps/50pps/10pps/1pps/0.1pps.

Counter input signal: DC5/12-24V.

The module is suitable for the measurement of the number of input pulses, such as speed, speed, instantaneous flow rate and so on,

As well as the quantity, the length, the cumulative flow and so on the measurement MITSUBISHI QY80. 

Input pulse values are updated every 10ms.

The number of pulses (sampling pulse number), which can be accumulated and processed by the moving average, is updated according to the counting period QY80 For A6TBXE/A6TBY36E/A6TBX54E/A6TBY54E/A6TBX70E (common cathode; source) long 5m.32 point connector for welding (37 pin D-Sub connector).Control axis: maximum 8 axes.

Greater flexibility MITSUBISHI QY80. 

PLC control and motion control using independent CPU, optimize the system configuration.

More than 4 CPU modules can be freely selected in multi CPU system.

MITSUBISHI SSCNET control function.

By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.

The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified MITSUBISHI QY80. 

Each 1 CPU can control up to 32 axes at the same time.

Can control the small capacity from 10W to 55KW large capacity servo motor.

Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring MITSUBISHI Transistor output module (source). Control axis: maximum 8 axes.

Peripheral I/F: by CPU PLC.

Manual pulse generator operation function: can use 3 sets of manual pulse generator MITSUBISHI Transistor output module (source). 

Synchronous encoder operation function: can use 8 synchronous encoder.

CPU special high speed communication bus, each 0.88ms cycle can exchange 14K data word.

Exercise basic performance is about 2 times, sports SFC processing time is reduced by about 1/4 MITSUBISHI Transistor output module (source). 

PLC interrupt program to achieve high-speed synchronization between multiple CPU.

Motion specific instruction.Express PCI bus.

Support Japanese, English OS.

Multimode fiber optic cable.

Dual loop controller network (control station / common station).

With external power supply function.

Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.

Using Ethernet cables and connectors available on the market to reduce costs.

High speed communication capable of communicating with 1Gbps.

Improve the communication response, significantly shorten the cycle time.

Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.

Data can be read or written to other station programmable controller.

Status of IE CC-Link field network can be confirmed by Works2 GX.

Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,

So it can reduce the time of abnormal to resume normal operation.

MELSECNET/H network module capable of composing large scale flexible network system.

The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station.

Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.

The distance beetween stations, the length of the total cable length, strong anti-interference QY80. 

Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.

Twisted pair bus system MITSUBISHI QY80. ..... Combined with high performance price ratio network module and twisted pair cable,

The construction cost of network system is very low.

MITSUBISHI QY68A

Brand: MITSUBISHI 

Name: Transistor output module (independent)

Model: QY68A

Output points: 8 points.

Output voltage and current: DC5~24A/ point; 8A/ common terminal.

OFF leakage current: 0.1mA.

Response time: 10ms.

Leaky type and source sharing.

18 point terminal station.

With the surge absorber.

All points of independence.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

Input: 4 channels.

Thermocouple (K, J, T, B, S, E, R, N, U, L, PLlI, W5Re/W26Re,,).

Heater disconnection detection function.

Sampling period: 0.5s/4 channel.

18 point terminal table x2.

Peak current suppression.

Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost MITSUBISHI QY68A. 

Heating function at the same time QY68A

The multiple loop can reach the set value at the same time to carry out the uniform temperature control,

Helps to prevent no-load and effective energy saving and reduce operating costs.

Automatic adjustment function.

The PID constant can be adjusted automatically in the control process.

Automatic adjustment of cost (time, material and electrical energy) can be reduced MITSUBISHI QY68A. 

Can be flexible in various settings, to achieve the best temperature control of the temperature control module.

Equipment for high temperature control stability of extrusion molding machine,

The temperature regulating module has the function of preventing overheating and preventing over cooling.

According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode MITSUBISHI QY68A. 

In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected. Program capacity: 8K step.

Input / output points: 1024 points.

Number of input and output elements: 2048 MITSUBISHI Transistor output module (independent). 

Continue to go beyond, to climb the peak of Q series.

Strengthen security function MITSUBISHI Transistor output module (independent). 

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users MITSUBISHI Transistor output module (independent). 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

CPU module expansion standard RAM (max 8MB).

Can be used with the SD memory card at the same time.

Continuous access file register.5 slots.

No need for power.

Used to install large Q series modules.

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance.

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown.

Wider application range, more advanced.

Leading in the era of the Q series CPU products.

Q series CPU products a wide range of applications,

Provide programmable controller, process, redundancy, C language, movement, manipuulator, CNC all kinds of CPU,

In order to meet the needs of various control QY68A. 

Through the multi CPU configuration, can be based on the use of the scale, purpose,

Construction of the best system to meet the requirements of all kinds oof control MITSUBISHI QY68A. 

In addition, the high reliability system can be constructed by the redundant system,

Even if a fault occurs, the system can continue to run.

MITSUBISHI QY50

Brand: MITSUBISHI 

Name: Transistor output module (drain type)

Model: QY50

Output points: 16 points.

Output voltage and current: DC12~24V; 0.5A/ point; 4A common.

OFF leakage current: 0.1mA.

Response time: 1ms.

16 points and 1 common ends.

Leaky type.

18 point terminal station.

With the surge absorber.

With fuse.

Ultra high speed processing, production time is shortened, better performance.

As applications become larger and more complex, it is necessary to shorten the system operation cycle time.

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved.

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

32 point connector for pressing flat cable (40 pin connector.Q3MEM-8MBS, Q3MEM-4MBS replacement battery.Input points: servo external signal 32 points, 8 axis.

Input mode: source / drain type.

Input and output points: 32 points.

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming MITSUBISHI QY50 

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming.

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area MITSUBISHI QY50. 

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved MITSUBISHI QY50. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.1 axes, open collector output type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector MITSUBISHI Transistor output module (drain type). 

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types MITSUBISHI Transistor output module (drain type). 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps MITSUBISHI Transistor output module (drain type). ) Master station.

Province distribution network module in cabinet and device.

Link to connect the 64 statioons when the fastest scanning time for 1 QY50. 2ms (rate 2.5Mbps).

According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.

CC-Link/LT from the station does not need any parameter settinggs MITSUBISHI QY50. 

Only need to set up the transmission speed in the master module, you can use the remote I/O.

QJ61CL12 can be used as the main station of CC-Link/LT.

MITSUBISHI QY40P-TS

MITSUBISHI QY40P-TS Product information and technical parameters：

Brand: MITSUBISHI 

Name: Transistor output module (spring clip terminal)

Model: QY40P-TS

Output points: 16 points.

Output voltage and current: DC12~24V; 0.1A/ point; 1.6A/ common.

OFF leakage current: 0.1mA;

Response time: 1ms; 1 point 16 public end; leaky type.

18 point spring clip connection terminal.

With heat protection.

With short circuit protection.

With the surge absorber.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

8 channel.

Input: DC0~20mA.

Output (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; 0~16000; -16000~16000.

Conversion speed: 80 s/1 channel.

18 point terminal station."2CH RS-232.

QJ71C24N (-R2) through the RS-232 serial communication,

Programming and monitoring of programmable controllers using programming tools MITSUBISHI QY40P-TS. 

QJ71C24N (-R2) with the function of the modem corresponding to the public telephone line,

Can be used to initialize the modem, and the connection of the object device processing,

Communication with a remote device, a programming tool, a modem, and a public telephone line QY40P-TS 

Using remote password,

Can be prevented by QJ71C24N (-R2) function of the modem Q series programmable controller for illegal access MITSUBISHI QY40P-TS. 

Serial communication module capable of collecting and changing data of programmable controller, monitoring and managing, measuring data collection and so on.

Can achieve the highest speed of 230.4kbps, the maximum of 960 words (MC protocol communications) of the high speed and large capacity communications.

Can use MC protocol, through the external devices (PC, monitors, etc MITSUBISHI QY40P-TS. ) to implement the data read / write programmable controller.

By selecting a non sequential protocol and use sequential program for communication control, the programmable controller and the external device (barcode reader and measurement equipment),

Communication with local protocols using external devices. "Measurement items: leakage current (Io), resistive leakage current (Ior).

Measuring circuit number: 2 circuits.

Insulation monitoring module for measuring leakage current.

Leakage current can be measured to ensure safety by monitoring the leakage current (Io), can detect the risk of electric shock.

Insulation state measurement of resistive leakage current (Ior) can be monitored continuously and continuously,

In order to continuously monitor the insulation aging status of the equipment.

Each measurement project can be carried out in the 2 phase of the alarm monitoring can be respectively on the leakage current (Io), resistive leakage current (Ior) for the 2 phase of the alarm monitorring,

No ladder diagram program QY40P-TS. Alarm monitoring is divided into 2 stages of attention alarm and danger alarm.

A module can measure two circuits of a module can be two circuits on the same line in the same system type power measurement.

Inn addition, Works2 GX (1 QY40P-TS. 90U version or higher version) can be used to easily set the parameters.

Leakage current (Io), resistive leakage current (Ior).

MITSUBISHI QY18A

Condition                        New

Weight (kg)                     0.22

Our Part Number            QY18A

Height (mm)                   98

Width (mm)                    27.4

Depth (mm)                   90

Brand                            Mitsubishi

Manufacturer Range    Q SeriesShort DescriptionMitsubishi QY18A Q Series 8 Point Relay, 240 VAC/24 VDC, 2 A Contact, All Points Independent

MITSUBISHI QY10-TS

Brand: MITSUBISHI 

Name: Relay output module (spring clip terminal)

Model: QY10-TS

Output points: 16 points.

Output voltage and current: 24V/AC240V 2A/1; DC point; 8A/1 common end.

Response time: 12ms.

16 points / a common end.

18 point spring clip connection terminal.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

MITSUBISHI QX82-S1

Condition                                  New

Weight (kg)                               0.18

Our Part Number                      QX82S1

Height (mm)                             98

Width (mm)                              27.4

Depth (mm)                              90

Brand                                        Mitsubishi

Manufacturer Range                Q Series

Short Description                     Mitsubishi QX82-S1 Q Series 64 Point, 24 VDC Input (4ma), Source Type, 32 Points/Co mmon, High Speed

MITSUBISHI QX81

Brand: MITSUBISHI 

Name: Type DC input module

Model: QX81

Input points: 32 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

32 point /1 a public side.

Common cathode.

37 pin D-sub connector.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

4 axis, differential drive output type.

2 axis /4 axis /3 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 1Mpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types MITSUBISHI QX81. 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control QX81

(the command pulse of the open collector positioning module is highest 200kpps.)

Can also meet the needs of high speed, high precision control MITSUBISHI QX81. 

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location MITSUBISHI QX81. 

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Type DC input module MITSUBISHI Type DC input module. 

Can also be used in combination with the CPU module to achieve appropriate control.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications. Input: 4 channels.

Thermocouple (C1602~1995 JIS) MITSUBISHI Type DC input module. 

Micro voltage (-100mV~100mV).

Conversion speed: (sampling period x3) /1 channel.

18 point terminal station.

Most suitable for process control of isolated analog modules.

Temperature data can be collected by connecting thermocouple / thermal resistance.

Products can choose multi-channel (8 channel) input type and channel isolation type.

Customers can choose the most suitable model according to the intended use.

Auto backup key data

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters due to forgetting to replace the battery.

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and other planned downtime,

The data is lost due to battery depletion.

The next time the power is turned on, the backup data will be automatically restored.

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card. QX81. 

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage ccard in advance MITSUBISHI QX81. 

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown.