MITSUBISHI QD75P4

Brand: MITSUBISHI
Name: Open collector output
Model: QD75P4
4 axes, open collector output type.
2 axis /4 axis /3 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Maximum pulse output: 200Kpps.
40 pin connector.
Positioning module.
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control.
(the command pulse of the open collector positioning module is highest 200kpps.)

Compact flash memory card.
Capacity: 512M bytes. Battery replacement.
Initial voltage 3.0V.
Replace large capacity battery module with cable.
Current capacity: 18000mAh.
Service life: 5 years.
Outline dimension: 98*55.2*87mmCable length 0.6 meters.
Extended substrate for connection.Output: 8 channels MITSUBISHI QD75P4.
Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000.
Output: 0~20mA DC
Conversion speed: 80 s/1 channel.
18 point terminal station.
Transformer isolation between power supply and output.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules MITSUBISHI QD75P4.
Using the inter channel isolation analog module.
The possibility of expanding control with intelligent function.
Providing a variety of analog modules, is the ideal choice for process control applications.
Can also meet the needs of high speed, high precision control.
Most suitable analog modules for high speed conversion control.
Can provide a variety of analog and digital analog conversion module products MITSUBISHI QD75P4.
These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.
Can meet the inverter control, such as high-speed conversion needs.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location MITSUBISHI Open collector output.
Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI Open collector output.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Open collector output.
Can also be used in combination with the CPU module to achieve appropriate control. 4 axes, open collector output type.
2 axis /4 axis /3 axis linear interpolation.
2 axis interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Maximum pulse output: 200Kpps.
40 pin connector.
Positioning module.
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control.
(the command pulse of the open collector positioning module is highest 200kpps.)
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a variety of types of I/O, analog and positioning function module.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.
Can also be used in combination with the CPU module to achieve appropriate control.
The possibility of expanding control with intelligent function.
Providing a variety of analog modules, is the ideal choice for process control applications.
Can aalso meet the needs of high speed, high precision control QD75P4.
Most suitable analog modules for high speed conversion control.
Can provide a variety of analog and digital analog conversion module products.
These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility MITSUBISHI QD75P4.
Can meet the inverter control, such as high-speed conversion needs.

MITSUBISHI QD75P2

Brand: MITSUBISHI 

Name: Open collector output

Model: QD75P2

2 axes, open collector output type.

2 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.) 

Capacity: 8M bytes.

Support SD memory card.

High speed universal QCPU support SD memory card,

In order to be able to have a memory card port between SD and PC to easily realize data exchange.

In addition, the SD memory card and the extended SRAM card can be used simultaneously.

Therefore, the extension of the file register using the extended SRAM card,

SD memory card can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation MITSUBISHI QD75P2 

Better user experience data recording function.

Easy to record, no need to program.

Simply through the special configuration tool wizard to easily complete the settings,

The collected data can be saved in CSV format to SD storage card MITSUBISHI QD75P2. 

Can be effectively used to save the CSV file to facilitate the creation of a variety of reference materials,

Including daily reports, generate reports and general reports.

These data can be applied to the data analysis, tracing, etc..

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording MITSUBISHI QD75P2. 

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording.Program capacity: 252 K step.

Input / output points: 4096 points MITSUBISHI Open collector output. 

Number of input and output elements: 8192.

Processing speed: 0.034 s.

Program memory capacity: 1008 KB.

Support USB and RS232 MITSUBISHI Open collector output. 

High performance CPU plus a set of rich and powerful process control instructions.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0.88ms) of the parallel control program, the high speed control MITSUBISHI Open collector output. 

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the pprevious model,

To ensure high speed and high accuracy of the machine control QD75P2. 

The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,

Starting from the programmable controller CPU to the second axis servo amplifier,

Time to output speed command of servo amplifier MITSUBISHI QD75P2. 

This time is the index of data transmission speed between CPU.

MITSUBISHI QD75P1

Brand: MITSUBISHI 

Name: Open collector output

Model: QD75P1

1 axes, open collector output type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.) 

Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 100 K step.

Processing speed: 0.0095 s.

Program memory capacity: 400 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing MITSUBISHI QD75P1. 

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0  QD75P1 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula MITSUBISHI QD75P1. 

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.5 slots.

Requires 1 power modules.

Used to install large Q series modules.

Reduce system downtime recovery time MITSUBISHI QD75P1. 

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance MITSUBISHI Open collector output. 

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown MITSUBISHI Open collector output. 

Wider application range, more advanced.

Leading in the era of the Q series CPU products.

Q series CPU products a wide range of applications,

Provide programmable controller, process, redundancy, C language, movement, manipulator, CNC all kinds of CPU,

In order to meet the needs of various control MITSUBISHI Open collector output. 

Through the multi CPU configuration, can be based on the use of the scale, purpose,

Construction of the best system to meet the requirements of all kinds of control.

In addition, the high reliability system can be constructed by the redundant system,

Even if a fault occurs, the system can continue to run.Input / output points: 4096 points.

You can use the CF card.

Version OS:VxWorks 5.4.

Automatically transfer the record file to the FTP server,

Simply by recording the configuration tool to carry out a simple setup,

A data record file stored on the SD memory card can be sent to the FTP server.

Because the record server can handle multiple files, it can reduce the task of management and maintenance.

When a failure occurs, it can quickly respond to.

Simply extract the data associated with the problem, do not have to spend a lot of time to filter a large number of diagnostic data,

So it can quickly deterrmine the cause of the failure, and make the solution QD75P1. 

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording.

Even wheen remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording MITSUBISHI QD75P1.

MITSUBISHI QD74MH16

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD74MH16

16 axes.

Connect SSCNET III.

Control unit: pulse.

Location data: 32 data / axis.

Ideal solution for simple multi axis positioning.

A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.

The multi axis system is most suitable for simple positioning control.

Ideal selection for high speed linear positioning control in multi axis system.

Linear interpolation operation with up to 4 axes can be carried out.

With the electronic gear, gap compensation, absolute position system, such as basic positioning function. 

Adapter for mounting DIN guide rail.

For Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, Q63B.Battery replacement.

Initial voltage 3.0V.

Replace large capacity battery module with cable.

Current capacity: 18000mAh.

Service life: 5 years.

Outline dimension: 98*55.2*87mmOutput: 6 channels.

Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000 MITSUBISHI QD74MH16. 

Output: DC-12V~12V; 0~22mA QD74MH16

Conversion speed: 6ms/ channel.

40 pin connector.

Isolation between channels.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller MITSUBISHI QD74MH16. 

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc MITSUBISHI QD74MH16. .

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module. For A6TBXE/A6TBY36E/A6TBX54E/A6TBY54E/A6TBX70E (common cathode; source) long 0.5m.Input: 2 channels.

50kpps MITSUBISHI Corresponding III SSCNET positioning module. 

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type) MITSUBISHI Corresponding III SSCNET positioning module. 

Used to replace the A series of large modules "AD61".

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control MITSUBISHI Corresponding III SSCNET positioning module. 

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter fuunction,

In order to meet the needs of various applications QD74MH16. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal mannufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders MITSUBISHI QD74MH16. (QD65PD

MITSUBISHI QD74MH8

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD74MH8

8 axes.

Connect SSCNET III.

Control unit: pulse.

Location data: 32 data / axis.

Ideal solution for simple multi axis positioning.

A variety of functions, such as positioning control, constant velocity control, and other positioning control systems.

The multi axis system is most suitable for simple positioning control.

Ideal selection for high speed linear positioning control in multi axis system.

Linear interpolation operation with up to 4 axes can be carried out.

With the electronic gear, gap compensation, absolute position system, such as basic positioning function. 

Capacity: 32M bytes.

Better user experience data recording function.

Easy to record, no need to program.

Simply through the special configuration tool wizard to easily complete the settings,

The collected data can be saved in CSV format to SD storage card.

Can be effectively used to save the CSV file to facilitate the creation of a variety of reference materials,

Including daily reports, generate reports and general reports MITSUBISHI QD74MH8 

These data can be applied to the data analysis, tracing, etc..

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording.

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording MITSUBISHI QD74MH8. 3 slots.

The main substrate needs to be equipped with CPU and power supply.

Requires 1 power modules.

Used to install Q series modules.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI QD74MH8. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI Corresponding III SSCNET positioning module. Cable length 5 meters.

Extended substrate for connection MITSUBISHI Corresponding III SSCNET positioning module. Input / output points: 4096 points.

Number of input and output elements: 8192.

Program capacity: 60 K step.

Processing speed: 0.0095 s.

Program memory capacity: 240 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU MITSUBISHI Corresponding III SSCNET positioning module. 

High speed and high precision data processing.

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0.014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula QD74MH8. 

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrrupt program is reduced to 100 s MITSUBISHI QD74MH8. 

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

MITSUBISHI QD72P3C3

MITSUBISHI QD70P8

Brand: MITSUBISHI 

Name: Open collector output

Model: QD70P8

8 axes, open collector output type.

Control unit: pulse.

Location data: 10 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Ideal solution for simple multi axis positioning.

Perfect match with stepper motor control.

Plus deceleration smooth, speed change subtle.

To speed up the speed of positioning control to start processing.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.)

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance.

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown. 

Master / local station sharing.

Corresponding Ver2 CC-Link.

Consistency of CC-Link to maintain loop transmission,

And the cycle of transmission and information (instantaneous transmission) communication separately, so as to ensure the timeliness of.

Even if the information reaches saturation, it will not affect the link scan time MITSUBISHI QD70P8. 

The QJ61BT11N module supports CC-Link version 1 and version 2, which can be used as a local station or master station module QD70P8

I/O control in the first class of open field network module.

CC-Link based on reliable field bus technology,

Able to transmit large number of bits data (such as ON/OFF information) and word data (such as analog information).Output points: 32 points MITSUBISHI QD70P8. 

Output voltage and current: DC5 ~ 24V0.2A/1 point.

2A/1 common end.

Response time: 2 s; 32 1 public end leakage.

40 pin connector.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password MITSUBISHI QD70P8. 

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location MITSUBISHI Open collector output. 

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI Open collector output. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Open collector output. 

Can also be used in combination with the CPU module to achieve appropriate control.

Easy connection programming tool via ethernet.

Programming tools (Workss2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings QD70P8. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method annd the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD70P8.

MITSUBISHI QD70P4

Brand: MITSUBISHI 

Name: Open collector output

Model: QD70P4

4 axes, open collector output type.

Control unit: pulse.

Location data: 10 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Ideal solution for simple multi axis positioning.

Perfect match with stepper motor control.

Plus deceleration smooth, speed change subtle.

To speed up the speed of positioning control to start processing.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.)

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance.

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown. 

"10BASE-T/100BASE-TX.

"A channel modular connector.

1 way RS-232.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used MITSUBISHI QD70P4. 

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection QD70P4

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control MITSUBISHI QD70P4. 

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs. "Module connector 1Ch.

1ch RS-232.

The possibility of expanding control with intelligent function MITSUBISHI QD70P4. 

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control MITSUBISHI Open collector output. 

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility MITSUBISHI Open collector output. 

Can meet the inverter control, such as high-speed conversion needs.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings MITSUBISHI Open collector output. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.PCI bus.

Support Japanese, English OS.

GI optical cable.

Dual loop controller network (control station / common station).

I/O control in the first class of open field network module.

CC-Link based on reliable field bus technology,

Able to transmit large number of bits data (such as ON/OFF information) and word data (such as analog information).

Consistency of CC-Link to maintain loop transmission,

And the cycle of transmission and information (instantaneous transmission) communication separately, so as to ensure the timeliness of.

Even if the information reachhes saturation, it will not affect the link scan time QD70P4. 

DB A20 AnyWire system uses a separate transmission mode,

Sensor networks to achieve high speed and high reliability.

The transmission distance of 50m/200m/1km/3km can be selectted MITSUBISHI QD70P4. 

1 modules can be up to 512 points of the input, 512 points of output (standard setting).

Even branch wiring, but also to detect transmission lines

MITSUBISHI QD63P6

Brand: MITSUBISHI 

Name: Multi channel high speed counter module

Model: QD63P6

Input: 6 channels.

200/100/10kpps.

Counter input signal: 5VDC.

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control.

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,

In order to meet the needs of various applications. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal manufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders. (QD65PD2)

Control axis: maximum 32 axes.

Teaching running function: there (when using SV13).

To stop the speed control function at the specified location.

The servo motor can rotate at a predetermined speed,

After starting the specified location to stop the instruction,

Can be set in advance to stop the location MITSUBISHI QD63P6. 

You can change the speed by changing the value of the options at the time of the operation,

You can also change the acceleration / deceleration time QD63P6. 

Phase compensation function.

The mixed function of virtual mode and real mode.

Smooth clutch linear acceleration / deceleration function.1 axis, differential drive output type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis MITSUBISHI QD63P6. 

Maximum pulse output: 1Mpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility MITSUBISHI QD63P6. 

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI Multi channel high speed counter module. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Multi channel high speed counter module. 

Can also be used in combination with the CPU module to achieve appropriate control.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications MITSUBISHI Multi channel high speed counter module. 

Based on the use off open collector outputs and differential drive output type 2 types QD63P6. 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control MITSUBISHI QD63P6. 

(the command pulse of the open collector positioning module is highest 200kpps.)

MITSUBISHI QD60P8-G

Brand: MITSUBISHI 

Name: Inter channel isolation pulse input module

Model: QD60P8-G

Input: 8 channels.

30kpps/10kpps/1kpps/100pps/50pps/10pps/1pps/0.1pps.

Counter input signal: DC5/12-24V.

The module is suitable for the measurement of the number of input pulses, such as speed, speed, instantaneous flow rate and so on,

As well as the quantity, the length, the cumulative flow and so on the measurement.

Input pulse values are updated every 10ms.

The number of pulses (sampling pulse number), which can be accumulated and processed by the moving average, is updated according to the counting period. 

Input: 4 channels.

Thermocouple (C1602-1995 JIS).

Conversion speed: 40ms/1 channel.

18 point terminal station.

Most suitable for process control of isolated analog modules.

Temperature data can be collected by connecting thermocouple / thermal resistance.

Products can choose multi-channel (8 channel) input type and channel isolation type MITSUBISHI QD60P8-G. 

Customers can choose the most suitable model according to the intended use QD60P8-G

Auto backup key data

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters due to forgetting to replace the battery.

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and other planned downtime,

The data is lost due to battery depletion MITSUBISHI QD60P8-G. 

The next time the power is turned on, the backup data will be automatically restored.

Reduce system downtime recovery time.

With a simple operation, you can back up all the data in the CPU to the memory card.

Through regular backup, can be the latest parameters, procedures, etc MITSUBISHI QD60P8-G. to save the storage card.

In the event of a CPU failure, after the replacement of CPU, can be a simple operation,

Restore the system by using the data storage card in advance.

Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown MITSUBISHI Inter channel isolation pulse input module. Input / output points: 4096 points.

Number of input and output elements: 8192 MITSUBISHI Inter channel isolation pulse input module. 

Program capacity: 40 K step.

Processing speed: 0.0095 s.

Program memory capacity: 160 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing.

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0 MITSUBISHI Inter channel isolation pulse input module. 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing.

In addition, the new addition of double precision floating ppoint arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula QD60P8-G. 

Shorten the fixed scan interrupt time, high precision device.

The minimum interval of the fixed period interrrupt program is reduced to 100 s MITSUBISHI QD60P8-G. 

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

MITSUBISHI QD62D

Brand: MITSUBISHI 

Name: High speed counting module

Model: QD62D

"Input: 2 channels.

200/100/10kpps.

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type).

DC12/24V.

0.1A/ point.

0.4A/ common end.

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control.

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,

In order to meet the needs of various applications. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal manufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders. (QD65PD2)"

FL-net (OPCN-2) Ver.2.00 interface.

10BASE5/10BASE-T use.

Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module.

The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet MITSUBISHI QD62D. 

Realize the previous communication method can not achieve the detailed control of data transmission,

Real time data analysis using user applications,

In order to provide support for improving production efficiency and equipment value QD62D

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings MITSUBISHI QD62D. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.Control axis: maximum 8 axes.

Peripheral I/F: by CPU PLC MITSUBISHI QD62D. 

Manual pulse generator operation function: can use 3 sets of manual pulse generator.

Synchronous encoder operation function: can use 8 synchronous encoder.

CPU special high speed communication bus, each 0.88ms cycle can exchange 14K data word.

Exercise basic performance is about 2 times, sports SFC processing time is reduced by about 1/4 MITSUBISHI High speed counting module. 

PLC interrupt program to achieve high-speed synchronization between multiple CPU MITSUBISHI High speed counting module. 

Motion specific instruction.Input points: 64 points.

Input voltage and current: 4mA DC24V.

Response time: 0.1/0.2/0.4/0.6/1ms.

32 point /1 a public side.

Common anode.

40 pin connector.

Easy connection programming tool via ethernet.

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings MITSUBISHI High speed counting module. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file passwword QD62D. 

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorizeed access to unauthorized users MITSUBISHI QD62D. 

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

MITSUBISHI QD62

Brand: MITSUBISHI 

Name: High speed counting module

Model: QD62

Input: 2 channels.

500/200/100/10kpps.

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type).

DC12/24V.

0.5A/ point.

2A common end.

40 pin connector. 

Adapter for mounting DIN guide rail.

For Q32SB, Q33SB, Q35SB, Q33B, Q52B, Q55B, Q63B."10BASE5.

Optimal network matching for application purposes and applications,

Seamless communication between different hierarchical systems.

Enhancing the ability of information communication through network.

This is also a major task in the field of automation MITSUBISHI QD62. 

Network environment provided by Q series

Is truly open & seamless QD62

Including based on universal ethernet,

Achieve easy management of the environment "IE Control CC-Link" controller network,

As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network.

Also including Japan''s first, to achieve the world standard,

And get the SEMI certification of the field network "CC-Link",

And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI QD62. 

And support sensor networks "AnyWire",

To enrich the lineup flexibility to integrate the various layers of automation network.

Ethernet interface module capable of selecting the most suitable system and object device.

Support 100BASE-TX, can speed up the transmission speed MITSUBISHI QD62. (QJ71E71-100)

Data communication can be performed between programmable controller CPU using special instructions.

Can use the HTTP protocol, through the Web browser on the PC access to the soft element of the programmable controller MITSUBISHI High speed counting module. 

PC (Web) on the use of the communication program library and sample screen can be obtained by download services.

Can connect a number of programming tools to improve the efficiency of debugging MITSUBISHI High speed counting module. 

Make use of e-mail function, through the mail server to send e-mail (ASCII format) and attachments (binary, ASCII and CSV format).

The KeepAlive function can be used to perform the existence of the object equipment inspection, and keep the connection in the open state MITSUBISHI High speed counting module. 

This can be used to ensure connectivity and to quickly find errors. "8 channel.

Input: DC4~20mA.

Output (resolution): 0~6400; 0~3200.

Conversion speed: 10ms/ channel.

18 point terminal station.

Isolation between channels.

Power supply to a two wire transmitter.

The possibility of expanding control with intelligent function.

At the same time, the channel isolation analog module realizes high isolation voltage,

Further improve the accuracy of the benchmark.

Provide support for process control using a general purpose programmable controller.

Flow meter, pressure meter, other sensors can be directly connected to analog input,

Control valve can also be directly connected to analog output.

Hardware and installation costs hhave been greatly reduced due to the need for an external isolation amplifier QD62. 

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input modulee MITSUBISHI QD62. 

No external isolation amplifier required.

Without the use of inter channel isolation analog modules.

Using the inter channel isolation analog module.

MITSUBISHI QD62E

 

Brand: MITSUBISHI 

Name: High speed counting module

Model: QD62E

Input: 2 channels.

200/100/10kpps.

Counter input signal: DC5/12/24V.

External input: DC5/12/24V.

Uniform output: Transistor (drain type).

DC12/24V.

0.1A/ point.

0.4A/ common end.

40 pin connector.

Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.

High speed counter module for counting high-speed pulse train.

Can be used in combination with the external encoder for positioning and other control.

The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.

Each 1 channel is equipped with 2 points of external uniform output.

Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)

Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,

In order to meet the needs of various applications. (QD64D2)

The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).

Can be in the semiconductor, liquid crystal manufacturing and other high position accuracy requirements of the equipment,

Perform accurate position tracking using high resolution encoders. (QD65PD2)

Program capacity: 60 K step.

Input / output points: 4096 points.

Number of input and output elements: 8192.

Processing speed: 0.034 s.

Program memory capacity: 240 KB.

Support USB and RS232.

High performance CPU plus a set of rich and powerful process control instructions.

High speed and high precision machine control by multi CPU MITSUBISHI QD62E. 

By parallel processing of the linear and multi CPU high-speed communication (cycle 0 QD62E 88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

In addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control MITSUBISHI QD62E. 

The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,

Starting from the programmable controller CPU to the second axis servo amplifier,

Time to output speed command of servo amplifier.

This time is the index of data transmission speed between CPU.Input points: 16 points MITSUBISHI QD62E. 

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

16 point /1 a public side.

Common anode.

18 point terminal station.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI High speed counting module. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI High speed counting module. 

Can also be used in combination with the CPU module to achieve appropriate control.

Continue to go beyond, to climb the peak of Q series MITSUBISHI High speed counting module. 

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password.

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet.

Programming tools (Workks2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings QD62E. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method annd the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD62E. 

MITSUBISHI Q62HLC

Brand: MITSUBISHI 

Name: Loop control module

Model: Q62HLC

Input: 2 channels.

Input: thermocouple / micro voltage / voltage / current.

Conversion speed (input):25ms/2 channel.

Sampling period: 25ms/2 channel.

Output: DC4~20mA.

Conversion speed (output):25ms/2 channel.

18 point terminal station.

With 5 kinds of PID control mode.

Loop control module suitable for fast response object control, such as temperature control, flow control, etc..

The loop control module has a PID control format and a sampling period of 25ms that is proportional to the speed,

Support high precision, high resolution Thermocouple Input, micro voltage input, voltage input, current input and current output.

The most suitable for high speed lift and temperature control and pressure control, flow control and other requirements of the application of high speed response.

Can be connected with JIS, IEC, NBS, ASTM standard thermocouple.

Through the small voltage, voltage, current input sensor, can be measured in a variety of input range of analog.

Provides the program control function, can according to the specific requirements of the time automatically change the target value (SV) and PID constant [proportional band (P), integration time (I), differential time (D)],

And cascade control function, allowing channel 1 as the main station, channel 2 for the control from the station. 

Master station.

Province distribution network module in cabinet and device.

Link to connect the 64 stations when the fastest scanning time for 1.2ms (rate 2.5Mbps).

According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.

CC-Link/LT from the station does not need any parameter settings MITSUBISHI Q62HLC. 

Only need to set up the transmission speed in the master module, you can use the remote I/O Q62HLC

QJ61CL12 can be used as the main station of CC-Link/LT.Input voltage range: DC24V.

Output voltage: DC5V.

Output power: 8.5A.

Simplified program debugging

Can use the software with the implementation of the conditions of the test function, any step in the program,

Changes the value of the soft component to a user specified value MITSUBISHI Q62HLC. 

In the past, when debugging the specific loop process, the need to add a set of soft components of the program,

At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action.

Therefore, do not need to change the program separately in order to debug, debugging operation is more simple MITSUBISHI Q62HLC. 

Auto backup key data

Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,

To prevent the loss of the program and the parameters due to forgetting to replace the battery MITSUBISHI Loop control module. 

In addition, the soft component data and other important data can be backed up to the standard ROM,

In order to avoid during the long holiday and other planned downtime,

The data is lost due to battery depletion MITSUBISHI Loop control module. 

The next time the power is turned on, the backup data will be automatically restored.

Through the expansion of soft components, more convenient to create the program.

M soft components and B soft components can be expanded to 60K points, making the program easier to understand MITSUBISHI Loop control module. 5 slots.

The main substrate needs to be equipped with CPU and power supply.

Ultra thin main substrate.

Requires 1 power modules.

Used to install Q series modules.

Optimal network matching for application purposes and applications,

Seamless communication between different hierarchical systems.

Enhancing the ability of information communication through network.

This is also a major task in the field of automation.

Network environment provided by Q series

Is truly open & seamless.

Including based on universal ethernet,

Achieve easy management of the environment "IE Control CC-Link" controller network,

As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network.

Also including Japan''s first, to achieve the world standard,

And get the SEMI certification of the field network "CC-Link",

And inherited the design concept of the provincial distribution network CC-Link/LT".

And support sensor networks "AnyWire",

To enrich the lineup flexibility to integrate the various layers of automation network.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module Q62HLC. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of thhe positioning of the industry, the control needs of various fields MITSUBISHI Q62HLC. 

Can also be used in combination with the CPU module to achieve appropriate control.

MITSUBISHI Q61LD

Brand: MITSUBISHI 

Name: Weighing sensor input

Model: Q61LD

1 channels.

Input (weighing sensor output): V/V 0.0~3.3m.

Output (resolution): 0~10000.

Conversion speed: 10ms.

18 point terminal.

Weighing sensor input module capable of directly connecting with all kinds of weighing sensor.

The weighing sensor can now be directly connected to a programmable controller system,

Without the need for an external connection to the signal converter, etc..

By ensuring the accuracy of the weighing sensor, stable data conversion speed,

To achieve a high precision measurement.

No external signal converter!

The weighing sensor input module is directly connected to the programmable controller, which can reduce the time and cost of the sensor!

Various types of weighing sensors can be connected with the magnetostrictive type, capacitive type, rotary instrument or strain gauge.

Can connect 6 wire system (combined with remote sensing technology and ratio method) or 4 wire system weighing sensor. 

Master station module supporting AnyWireASLINK system.

Connecting sensor and programmable controller.

Free configuration of sensors, control of 512 points of the input and output.

The AnyWireASLINK transmission line (2 lines) can be used for communication to supply power for the sensor, and the sensor can also be conveniently added MITSUBISHI Q61LD. 

Can through the project software GXWorks2 batch management sensor shedding detection and from the station module settings, etc Q61LD. 

Substantial savings in time and cost.5 slots.

The main substrate needs to be equipped with CPU and power supply.

Requires 1 power modules.

Used to install large Q series modules.

Optimal network matching for application purposes and applications,

Seamless communication between different hierarchical systems MITSUBISHI Q61LD. 

Enhancing the ability of information communication through network.

This is also a major task in the field of automation.

Network environment provided by Q series

Is truly open & seamless.

Including based on universal ethernet,

Achieve easy management of the environment "IE Control CC-Link" controller network,

As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Q61LD. 

Also including Japan''s first, to achieve the world standard,

And get the SEMI certification of the field network "CC-Link",

And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Weighing sensor input. 

And support sensor networks "AnyWire",

To enrich the lineup flexibility to integrate the various layers of automation network MITSUBISHI Weighing sensor input. 

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Weighing sensor input. 

Can also be used in combination with the CPU module to achieve appropriate control.SRAM memory card; capacity: 4M bytes.

Support SD memory card.

High speed universal QCPU support SD memory card,

In order to be able to have a memory card port between SD and PC to easily realize data exchange.

In addition, the SD memory card and the extended SRAM card can be used simultaneously.

Therefore, the extension of the file register using the extended SRAM card,

SD memory card can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation.

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording.

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording.

Better user experience data recording function.

Easy to record, no need to program.

Simply through the special configuration tool wizard to easily complete the settings,

The collected data can be saved in CSV format to SD storage card.

Can be effectively used to save the CSV file to facilitate the creation of a variety of reference materials,

Including daily reports, generate reports annd general reports Q61LD. 

These data can be applied to the data analysis, tracing, etc..

To record the change of control data without missing.

Data can be collected in a time interval or in a millisecond time interval,

To record the changge of the specified control data without any omission MITSUBISHI Q61LD. 

Therefore, in the event of failure, can quickly determine the cause, the precise action analysis.