FX5U-32MT/DSS

Specifications

Attribute	Value
For Use With	FX5 Expansion Adapter, FX5 Extension Module
Number of I/O	16
Manufacturer Series	MELSEC iQ-F
Number of Inputs	16
Input Type	Analogue
Voltage Category	5 V dc, 24 V dc
Output Type	Analogue
Number of Outputs	16
Display Included	Yes
Communication Port Type	RS232C, RS485
Program Capacity	128 kB
Programming Interface	Computer
Number of Communication Ports	2
Memory	4 (SD Memory Card) GB, 5 (Data Memory/Standard ROM) MB, 120 (Device/Label Memory) kB, 128 (Program Capacity) kB
Output Current	480 mA, 900 mA
Width	90mm
Length	150mm
Programming Language Used	Function Block Diagram/Ladder Language (FBD/LD), Ladder Diagram (LD), Structured Text (ST)
Depth	83mm
Minimum Operating Temperature	-20°C
Dimensions	150 x 90 x 83 mm
Maximum Operating Temperature	+55°C
Maximum Inputs/Outputs	16 (Input), 16 (Output)
Mounting Type	Desktop

FX5U-32MR/DS

Specifications

Attribute	Value
For Use With	FX5 Expansion Adapter, FX5 Extension Module
Number of I/O	16
Manufacturer Series	MELSEC iQ-F
Number of Inputs	16
Input Type	Analogue
Voltage Category	5 V dc, 24 V dc
Output Type	Analogue
Number of Outputs	16
Display Included	Yes
Communication Port Type	RS232C, RS485
Program Capacity	128 kB
Programming Interface	Computer
Number of Communication Ports	2
Minimum Operating Temperature	-20°C
Depth	83mm
Width	90mm
Dimensions	150 x 90 x 83 mm
Maximum Inputs/Outputs	16 (Input), 16 (Output)
Maximum Operating Temperature	+55°C
Memory	4 (SD Memory Card) GB, 5 (Data Memory/Standard ROM) MB, 120 (Device/Label Memory) kB, 128 (Program Capacity) kB
Mounting Type	Desktop
Length	150mm
Output Current	480 mA, 900 mA
Programming Language Used	Function Block Diagram/Ladder Language (FBD/LD), Ladder Diagram (LD), Structured Text (ST)

FX3S-5DM

MITSUBISHI FX3S-5DM Product information and technical parameters：

• Brand: MITSUBISHI 
• Name: Display module
• Model: FX3S-5DM
• Display: 7 segment digital display + icon display.
• Can monitor, change the value of software components.
• Can also be simple to operate, change the value.
• Equipped with a button operation can be used (operator certification function) and control through the PLC control function,
• Can be used with the function expansion board.
• Can be installed directly to the FX3S, FX3SA, no wiring. 
• Needle number: 40.
• Specification: loose wire connector, 5 sets (0.3mm 2). Max input / output points: 64 points.
• Power supply voltage: 24VDC.
• Input points: 32 points.
• Output points: 32 points.
• Output type: Transistor (source).
• Power consumption: 11W.
• Weight (kg):0.35.
• Size (WxHxD) mm:60x90x87.Taking into account space saving and processing speed FX3S-5DM. 
• Connector input and output type compact high performance universal machine FX3S-5DM
• Compact, scalable input / output.
• Can connect analog quantity, communication, positioning, etc..
• Rich special extension equipment for FX2N.
• By connecting the compact FX2rvc series with the input and output expansion module.
• The input and output can be extended to 256 points FX3S-5DM. 
• Built in 8000 step RAM memory.
• By installing the memory card box, the maximum can be extended to the 16000 step.
• Overseas oriented products meet all kinds of international standards.
• Use terminal module to replace connector connection or relay terminal row connection,
• So as to save the wiring inside the cabinet. Max input / output points: 20 points.
• Power supply voltage: 24VDC.
• Input points: 12 points FX3S-5DM. 
• Output points: 8 points.
• Output type: relay.
• Power consumption (W): 7.
• Weight (kg):0.3.
• Size (WxHxD) mm:75x90x49.
• Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
• This type of PLC is mainly used in all of the digital input, digital output control point of the device.
• Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
• The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
• The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
• The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication FX3S-5DM. 
• All equipment is digital input and output point.
• The total I/O points are not more than 30 points, and the input points are less than 16, thhe output points are less than 14 FX3S-5DM. 
• Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.

FX3G-EEPROM-32L

Spesifications

• Manufacturer: Mitsubishi Electric 
• FX3S, EEPROM with FX3G loader function memory FX3G-EEPROM-32L
• Apply sequencer : FX3S, FX3G 
• Memory Type : EEPROM memory 
• Memory capacity : 32000 step, FX3S when connecting, 16000 step (program capacity is 4000 steps) can be used to. 
• Function : Loader function with battery backup unnecessary sequencer write at and mis-writing prevention with protect switch 
• Shipping Weight : 1 Kg

FX3U-CNV-ADP

Spesifications

Condition	;New
Weight (kg)	:0.1
Our Part Number	:FX3GCNVADP
Height (mm)	:14.6
Width (mm)	:90
Depth (mm)	:86
Brand	:Mitsubishi
Manufacturer Series	:FX3G
Manufacturer Range	:FX Series
Short Description	:Mitsubishi Fx3g Adp Adapter For Fx3u Adp Modules

FX3U-ENET-ADP

Spesifications

• Manufacturer: Mitsubishi Electric 

• Ethernet interface block FX3U-ENET-ADP
• Transmission Specifications Data transmission speed: 100Mbps or 10Mbps, 
• Communication mode: Full / half duplex 
• Transmission method: Baseband 
• The maximum segment length: 100m 
• The maximum number of nodes / connection: 10BASE-T: cascade up to four stages
  100BASE-TX: cascade up to two-stage
  above is the connection possible number of stages at the time of use repeater hub.
  Can be connected to the number of stages at the time of switching hub used, please check with the manufacturer of the switching hub to be used. 
• Connector: RJ45 
• function: · MELSOFT connection
  communicate by · MC protocol
  direct connection with · MELSOFT (simple connection)
  and connection CPU search function and time setting function
  ? time setting function (SNTP client), executable only after the establishment of the trigger conditions
  diagnosis from · MELSOFT function
  data monitoring function 
• Number of connections: MELSOFT connection + MC protocol + data monitoring ? 4 connection 
• It can be connected to the number of the basic unit: One
  Ethernet adapter, as well as the communication function expansion board and other communication special adapter, and 1 channel the communication channel (CH) occupation. 
• Apply PLC: FX3S, FX3G (V2.00 or later), FX3U (since V3.10), FX3GC (V2.00 or later), FX3UC (V3.10 or later)
  connection to the FX3S is required FX3S-CNV-ADP.
  Connection to the FX3G is required FX3G-CNV-ADP.
  FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board. 
• mass: 0.1kg 
• Power Specifications:   
• Power supply: 30mA / DC5V (internal power supply from DC5V power of the basic unit) 
• Allowable momentary power failure time: As well as the sequencer to be connected 
• Ambient temperature: 0 ~ 55 °C ····· operation, -25 ~ 75 °C ····· during storage 
• Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation 
• Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Impact resistance: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each 
• Anti-noise: Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator 
• Withstand voltage: All terminals and between the ground terminal: AC500V 1 minute 
• Insulation resistance: All terminals and between the ground terminal: DC500V 5MΩ more in insulation resistance tester 
• Working environment: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly 
• Use advanced: 2000m or less
  can not be used in the pressurized environment to more than atmospheric pressure. There is a possibility of failure. 
• Shipping Weight : 1 Kg

FX3U-485ADP-MB

Spesifications

• Manufacturer: Mitsubishi Electric 

• FX3U-485ADP-MB
• Transmission standard: RS-485 standard, conform to the RS-422 standard 
• Insulation method:Photocoupler 
• Transmission distance: The total length 500m or less
  (to the equipment to be connected FX2N-485-BD, FX1N- 485-BD, FX3U-485-BD, following the total length 50m if it contains a FX3G-485-BD) 
• External device connection method: Europe terminal block 
• Communication system: Half-duplex bi-directional 
• Communication procedure: . MODBUS (master or slave) - No-protocol communication, computer link (dedicated protocol format 1, dedicated protocol format 4), parallel link and simple PC-to-PC link inverter communication 
• communication speed MODBUS communication: 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps)
  corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012. (Serial number: 127 **** or later) 
• No-protocol, the computer link: 300/600/1200/2400/4800/9600/19200/38400 (Bps)
  FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. 
• Parallel link: 115200 (bps) 
• Simple PC-to-PC link: 38400 (bps) 
• Inverter communication: 4800/9600/19200/38400 (Bps)
  FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. 
• Display (LED): RD, SD, POWER 
• O occupied points: 0 points (no relation to the maximum input and output points of the sequencer) 
• Apply sequencer: [FX3S]
  V1.00 and later: corresponding to all the communication function 
• [FX3G]
  V1.00 and later: MODBUS, corresponding to the communication functions other than the inverter communication
  V1.10 and later: inverter communication function to the corresponding
  V1.30 and later: in MODBUS communication function correspondence 
• [FX3U]
  V2.20 and later: communication functions other than the MODBUS communication to the corresponding
  V2.40 and later: corresponds to the MODBUS communication function 
• [FX3GC]
  V1.40 and later: corresponding to all the communication function 
• [FX3UC]
  V1.00 and later: MODBUS communication communication function to the corresponding non-
  V2.40 and later: corresponds to the MODBUS communication function.
• connection to FX3S is required FX3S-CNV-ADP. 
• Connection to the FX3G is required FX3G-CNV-ADP. 
• FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board. 
• mass: 0.08kg 
• Power Specifications: 
• Power supply: DC5V 20mA (internal power supply from the sequencer) 
• Ambient temperature: 0 ~ 55 °C ..... operation, -25 ~ 75 °C ..... during storage 
• Relative humidity: 5 ~ 95% RH (non-condensing) ...... operation 
• Vibration resistance When the DIN rail mounting : Frequency: 10 ~ 57Hz: Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• When the DIN rail mounting : Frequency: 57 ~ 150Hz: Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time : Frequency: 10 ~ 57Hz: Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time : Frequency: 57 ~ 150Hz: Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Impact: 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each 
• Anti-noise: Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator 
• Withstand voltage: External terminals and between the PLC main unit of the ground terminal: AC500V 1 minute 
• Insulation resistance: External terminals and between the PLC main unit of the ground terminal: DC500V 5MΩ more in insulation resistance tester 
• Use atmosphere: Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly 
• Advanced use: 2000m or less can not be used in the pressurized environment to more than atmospheric pressure. 
• There is a possibility of failure. 
• Shipping Weight : 1 Kg

FX3U-232ADP-MB

Spesifications

• Manufacturer: Mitsubishi Electric 

• RS-232C for communication special adapter (MODBUS corresponding) FX3U-232ADP-MB
• Transmission standard : RS-232C compliant 
• Insulation method : Photocoupler 
• Transmission distance : Up to 15m 
• External device connection method : D-SUB 9Pin connector (male) 
• Communication system : Full-duplex bi-directional 
• Communication procedure : · MODBUS communication (master or slave) - No-protocol communication , computer link (dedicated protocol format 1, dedicated protocol format 4) programming communication 
• communication speed MODBUS communication : 300/600/1200/2400/4800/9600/19200/38400/57600/115200 (bps) corresponds to 38400/57600 / 115200bps from products manufactured on or after July 2012. (Serial number: 127 **** or later) 
• No-protocol communication, computer link : 300/600/1200/2400/4800/9600/19200/38400 (Bps) FX3U, FX3UC is, later Ver.2.41, it supports 38400bps. 
• Programming communication : 9600/19200/38400/57600/115200 (bps) 
• Display (LED) : RD, SD, POWER 
• O occupied points : 0 points (no relation to the maximum input and output points of the sequencer) 
• Apply sequencer : [FX3S]
  V1.00 and later: corresponding to all the communication function
  [FX3G]
  V1.00 and later: communication functions other than the MODBUS communication to the corresponding
  V1.30 and later: corresponds to the MODBUS communication function
  [FX3U]
  V2.20 and later: other than MODBUS communication communication function to the corresponding of
  V2.40 and later: corresponds to the MODBUS communication function
  [FX3GC]
  V1.40 and later: corresponding to all the communication function
  [FX3UC]
  V1.00 and later: corresponds to the communication functions other than the MODBUS communication
  V2.40 and later: MODBUS corresponding to the communication function  
• connection to FX3S is required FX3S-CNV-ADP.
  Connection to the FX3G is required FX3G-CNV-ADP.
  FX3U, connection to the FX3UC-32MT-LT (-2), you must have the function expansion board. 
• mass : 0.08kg 
• Power Specifications :   
• Power supply : DC5V 30mA (internal power supply from the sequencer) 
• Ambient temperature : 0 ~ 55 °C ····· operation, -25 ~ 75 °C ····· during storage 
• Relative humidity : 5 ~ 95% RH (non-condensing) ...... operation 
• Vibration resistance When the DIN rail mounting Frequency: 10 ~ 57Hz Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Frequency: 57 ~ 150Hz Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Direct mounting at the time Frequency: 10 ~ 57Hz Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Frequency: 57 ~ 150Hz Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes) 
• Impact : 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each 
• Anti-noise : Noise voltage 1,000Vp-p, noise width 1μs, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator 
• Withstand voltage : D-SUB 9Pin connector and between the ground terminal of the basic unit: AC500V 1 minute 
• Insulation resistance : D-SUB 9Pin connector and between the ground terminal of the basic unit: DC500V 5MΩ more in insulation resistance tester 
• Use atmosphere : Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly 
• Advanced use : 2000m or less
  can not be used in the pressurized environment to more than atmospheric pressure. There is a possibility of failure. 
• Shipping Weight: 1 Kg

FX3U-4AD-PNK-ADP

Spesifications

Condition	:New
Weight (kg)	:0.1
Our Part Number	:FX3U4ADPNKADP
Height (mm)	:90
Width (mm)	:17.6
Depth (mm)	:89.5
Brand	:Mitsubishi
Manufacturer Series	:FX3U
Manufacturer Range	:FX Series
Short Description	:Mitsubishi FX3U-4AD-PNK-ADP Analogue Input Module, For Pt1000/Ni1000, 4 Analogue Inputs

FX3U-4AD-PTW-ADP

Spesifications

Condition	:New
Weight (kg)	:0.1
Our Part Number	:FX3U4ADPTWADP
HS Code	:85389099
Height (mm)	:90
Width (mm)	:17.6
Depth (mm)	:89.5
Brand	:Mitsubishi
Manufacturer Series	:FX3U
Manufacturer Range	:FX Series
Input Voltage	:24 VDC
No. of Inputs	:4
Input Type	:RTD
Short Description	:Mitsubishi FX3U-4AD-PTW-ADP Analogue Input Module, 12 Bit, Wide Range (-1000 To +600 Deg), 4 Analogue Inputs For Pt100

FX3U-4AD-TC-ADP

Spesifications

• Manufacturer : Mitsubishi Electric
• FX3U-4AD-TC-ADP
• Analog input adapter for thermocouple type temperature sensor FX3U - 4AD - TC - ADP
• Temperature sensor . temperature control input signal : Thermocouple K type or J type JIS C 1602-1995 However, please use the same type thermocouple of all channels.
• Number of input channels : 4 channels
• Rated temperature range K type : -100 ° C to + 1000 ° C (-148 ° F to + 1832 ° F)
• J type : -100 ° C. to + 600 ° C. (-148 ° F. to + 1112 ° F.)
• Digital output K type : -1000 to +10000 (-1480 to + 18320 ) Within parentheses, the digital value at Fahrenheit setting
• J type : -1000 to +6000 (-1480 to + 11120 ) Within (), the digital value at Fahrenheit setting
• resolution K type : 0.4 ° C (0.72 ° F)
• J type : 0.3 ° C (0.54 ° F)
• Overall accuracy : ± 0.5% of full scale + 1 ° C
• control method : Depending on the sequence program
• Conversion speed FX3U / FX3UC PLC : 200 μs (Data update every calculation cycle)
• FX3S / FX3G / FX3GC Sequencer : 250 μs (Data update every calculation cycle)
• Insulation method : . Isolation between analog input part and sequencer by photo coupler . Insulation between analog input part and power supply by DC / DC converter . No isolation between each channel
• Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)
• Application sequencer : FX3S, FX3G, FX3U, FX3GC, FX3UC (FX3UC - 32MT - LT is Ver.1.30 or later) FX3S - CNV - ADP is required for connection to FX3S. For connection to FX 3 G, FX 3 G - CNV - ADP is required. To connect to FX3U and FX3UC - 32MT - LT (-2), a function expansion board is required.
• mass : 0.1 Kg
• Power supply specification
• Power supply : DC 5 V 15 mA (internal power supply from the sequencer) DC 24 V + 20% -15% 45 mA (external power supply)
• Ambient temperature : 0 to 55 ° C. ... Operating -25 to 75 ° C. ..... Save
• Relative humidity : 5 to 95% RH (noncondensing).... in operation
• Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)
• Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)
• Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)
• Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)
• Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse
• Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si
• tor with period of 30 to 100 Hz
• Withstand voltage : Between all terminals and ground terminal: 500 VAC for 1 minute
• Insulation resistance : Between all terminals and ground terminal: 500 MV DC 500 MΩ or more with an insulation resistance meter
• ground : Class D grounding (grounding resistance: 100 Ω or less) Grounding should be dedicated ground or common ground.
• Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
• Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
• Shipping Weight : 1.1 Kg