AUTOMATION JAYA

Sensorless Vector AC Micro Drive. The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements. Component features: Delta Part nr: VFD004E21T Keypad included with delivery VFD (Can be mounted in VFD or Panel) Single 220V input 3x220V output Set speed with onboard potentiometer or 0-10V input Programmable Acceleration and Deceleration For full list of features see the manual Power Rating: 0.4 kW Phase: 1 Supply Voltage: 230 V (AC) Current Rating: 6.5 A Output Frequency: 0-600 Hz Degree of Protection: IP20 Temperature Range± -10 till +50 C Dimensions (Lenght x Widht x Height) 142x 72x 152mm Filter included: Yes

Instead of soldering to the 44 pin connector. This module allows easy push in terminals. Not all 44 pins are accessible, but the most important ones are. The connectors are all labelled, and made such that it is impossible to invert connections. Its really foolproof.

This cable is used to communicate between the ASD-B2 Servo Drive and the PC. It allows parameters to be set and reset. Also it can be used to tune motor and drive. The software has advanced scope/tuning functions. Component features: Cable used for programming the ASD-B2 servo drive

Breakout board that can be used with Delta ASDA-A2 systems for wiring the CN1 connector. It could probably also be used on other brand servo drives, but the labels on on the terminals are made for ASDA-A2 Component features: Terminals labeled for ASDA-a2 system Accessory for ASDA-A2 system Terminal block, CN1 breakout, 50 pins (2 x 25 layout) DIN rail mountable Includes 50cm/18 inch cable

Connector that can be used with Delta ASDA-A2 systems for wiring the CN1 connector. It could probably also be used on other brand servo drives, but we have it in stock for the ASDA-A2 Component features: Accessory for ASDA-A2 system Used for the CN1 connector on ASDA-A2 systems Number of pins: 50 Type of termination: solder

Instead of soldering to the 44 pin connector. This module allows easy to push in terminals. Not all 44 pins are accessible, but the most important ones are. Those used for Servo On, step and direction input, but also the digital inputs and digital outputs. The connectors have labels on them, written is de pin number and function, making it very easy to do wiring. Also the 2 push in connectors are protected, so they cant be swapped. The physical pinning is different/blocked. Component Features: Easy to wire, clear labels on connector Type of Termination: Push In Delta Part Number: ASD-IF-SC5020 Compatible with Delta ASDA-A2 servo drivers (CN1 connector)

Connects ASD-A2 to PLC, HMI and other controllers via RS-232 communication. Note that ASD-A2 also has a connector for USB (CN4). Most clients prefer the USB option, since every PC has USB available. Component features: Standard cable length 3m

Component features: Frame size: 180 x 180 mm Rated output power: 4500 W Speed range: 0 - 1500 rpm 20-bit Incremental Encoder

Component features: Frame size: 180 x 180 mm Rated output power: 4500 W Speed range: 0 - 1500 rpm 20-bit Incremental Encoder

Component features: Frame size: 180 x 180 mm Rated output power: 3000 W Speed range: 0 - 1500 rpm 20-bit Incremental Encoder

Component features: Frame size: 180 x 180 mm Rated output power: 3000 W Speed range: 0 - 1500 rpm 20-bit Incremental Encoder

Component features: Frame size: 130 x 130 mm Rated output power: 2000 W Speed range: 0 - 2000 rpm 20-bit Incremental Encoder

Component features: Frame size: 130 x 130 mm Rated output power: 2000 W Speed range: 0 - 2000 rpm 20-bit Incremental Encoder

Component features: Frame size: 130 x 130 mm Rated output power: 1500 W Speed range: 0 - 2000 rpm 17-bit Rotary Optical Encoder

Component features: Frame size: 130 x 130 mm Rated output power: 1500 W Speed range: 0 - 2000 rpm 17-bit Rotary Optical Encoder

Component features: Frame size: 100 x 100 mm  Shaft diameter: 19mm  Rated output power: 1000 W  Speed range: 0 - 3000 rpm  17-bit Rotary Optical Encoder

Component features: Frame size: 100 x 100 mm  Shaft diameter: 22 mm  Rated output power: 1000 W  Speed range: 0 - 3000 rpm  17-bit Rotary Optical Encoder