AUTOMATION JAYA

Rabu, 30 Oktober 2019

VFD022E21A 1x230V->3x230V 2.2KW

Sensorless Vector AC Micro Drive. The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.

Component features:

Delta Part nr: VFD022E21A
Keypad included with delivery VFD (Can be mounted in VFD or Panel)
Single 220V input 3x220V output
Set speed with onboard potentiometer or 0-10V input
Programmable Acceleration and Deceleration
For full list of features see the manual
Power Rating: 2.2 kW
Phase: 1
Supply Voltage: 230 V (AC)
Current Rating: 11.0 A
Output Frequency: 0-600 Hz
Degree of Protection: IP20
Temperature Range: -10 to +50 DegreesCelsius
Dimensions (Length x Width x Height) 174x100x152mm
Filter included: yes

VFD015E21A 1x230V->3x230V 1,5KW

Component features:

Delta Part nr: VFD015E21A
Keypad included with delivery VFD (Can be mounted in VFD or Panel)
Single 220V input 3x220V output
Set speed with onboard potentiometer or 0-10V input
Programmable Acceleration and Deceleration
For full list of features see the manual
Power Rating: 1.5 kW
Phase: 1
Supply Voltage: 230 V (AC)
Current Rating: 7.5 A
Output Frequency: 0-600 Hz
Degree of Protection: IP20
Temperature Range: -10 to +50 DegreesCelsius
Dimensions (Length x Width x Height) 174x100x152mm
Filter included: yes

VFD007E21T 1x230V->3x230V 0.75KW

Component features:

Delta Part nr: VFD007E21T
Keypad included with delivery VFD (Can be mounted in VFD or Panel)
Single 220V input 3x220V output
Set speed with onboard potentiometer or 0-10V input
Programmable Acceleration and Deceleration
For full list of features see the manual
Power Rating: 0.75 kW
Phase: 1
Supply Voltage: 230 V (AC)
Current Rating: 5.1 A, 9.7 A
Output Frequency: 0-600 Hz
Degree of Protection: IP20
Temperature Range: -10 till + 50 degrees
Filter included: Yes
Dimensions (Lenght x Width x Height) 142x72x152 mm

VFD004E21T 1x230V->3x230V 0.4KW

Component features:

Delta Part nr: VFD004E21T
Keypad included with delivery VFD (Can be mounted in VFD or Panel)
Single 220V input 3x220V output
Set speed with onboard potentiometer or 0-10V input
Programmable Acceleration and Deceleration
For full list of features see the manual
Power Rating: 0.4 kW
Phase: 1
Supply Voltage: 230 V (AC)
Current Rating: 6.5 A
Output Frequency: 0-600 Hz
Degree of Protection: IP20
Temperature Range± -10 till +50 C
Dimensions (Lenght x Widht x Height) 142x 72x 152mm
Filter included: Yes

DELTA I/O Push In Terminals for B2 Drives ASD-IF-DS4444

Instead of soldering to the 44 pin connector. This module allows easy push in terminals. Not all 44 pins are accessible, but the most important ones are. The connectors are all labelled, and made such that it is impossible to invert connections. Its really foolproof.

ASD-B2 PC Program Cable 3mtr USB2 (ASD-CNUS0A08)

This cable is used to communicate between the ASD-B2 Servo Drive and the PC. It allows parameters to be set and reset. Also it can be used to tune motor and drive. The software has advanced scope/tuning functions.

Component features:

Cable used for programming the ASD-B2 servo drive

DELTA ASD-BM-50A Breakout for CN1

Breakout board that can be used with Delta ASDA-A2 systems for wiring the CN1 connector. It could probably also be used on other brand servo drives, but the labels on on the terminals are made for ASDA-A2

Component features:

Terminals labeled for ASDA-a2 system
Accessory for ASDA-A2 system
Terminal block, CN1 breakout, 50 pins (2 x 25 layout)
DIN rail mountable
Includes 50cm/18 inch cable

DELTA I-O Connector ASD-CNSC0050

Connector that can be used with Delta ASDA-A2 systems for wiring the CN1 connector. It could probably also be used on other brand servo drives, but we have it in stock for the ASDA-A2

Component features:

Accessory for ASDA-A2 system
Used for the CN1 connector on ASDA-A2 systems
Number of pins: 50
Type of termination: solder

I/O Push In Terminal for A2 Drives ASD-IF-SC5020

Instead of soldering to the 44 pin connector. This module allows easy to push in terminals. Not all 44 pins are accessible, but the most important ones are. Those used for Servo On, step and direction input, but also the digital inputs and digital outputs. The connectors have labels on them, written is de pin number and function, making it very easy to do wiring. Also the 2 push in connectors are protected, so they cant be swapped. The physical pinning is different/blocked.

Component Features:

Easy to wire, clear labels on connector
Type of Termination: Push In
Delta Part Number: ASD-IF-SC5020
Compatible with Delta ASDA-A2 servo drivers (CN1 connector)

ASD-A2 RS232 Delta Communication Cable (3m) (ASD-CARS0003)

Connects ASD-A2 to PLC, HMI and other controllers via RS-232 communication. Note that ASD-A2 also has a connector for USB (CN4). Most clients prefer the USB option, since every PC has USB available.

Component features: