PLC Delta DVP-EX Series

The EX series is the analog MPU with the lowest cost. Apart from supporting digital input and output, the EX series has built-in multiple analog I/O channels and integrates a variety of communication protocol’s for constructing a complete control network. EX series is suitable for all kinds of small PLC applications.

Applications :
USED for packaging machine, spinning machine, conveyer belt (rotation speed control), winding machine (tension control), food processing machine, landscape fountain.

Specifications :

• MPU points: 20 (8DI/6DO, 4AI/2AO)
• Max. I/O points: 238
• Program capacity: 4K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
• Built-in 4-point high-speed counter

• Built-in analog I/O function

PLC Delta DVP-ES2/EX2 Series Expansion Module

Features & Benefits :

Digital modules (output/input/mix), analog modules (output/input/mix), temperature measurement modules, resolver modules

Applications :

HVAC, printing machine, packaging machine, molding injection machine, inspection system

Specifications :

• Digital modules (output/input/mix): 8,16, 32(AC power)
• Analog modules (output/input/mix): 4 channel, 6 channel inputs (14-bit)
• Temperature measurement modules: conversion time 200ms/channel, overall accuracy +/-0.6%, resolution RTD inputs Pt100 / Pt1000 / Ni100 / Ni1000, thermocouple inputs J, K, R, S, T, E, N type
• Resolver modules: distance 50M, resolution 12-bits, 500rpm, disconnection detection is supported

PLC Delta DVP-ES2/EX2 Series

ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.

Applications :
HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

Specifications :

• MPU points: 16 / 20 / 24 / 32 / 40 / 60
• Program capacity: 16k steps
• Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
• Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
• DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
• Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
• New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
• Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
• Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta@@s AC motor drives
• Password protection: Password for subroutine, user ID, restriction on trial times
• Highly efficient instruction efficient instruction execution

PLC Delta DVP-ES Series

ES series is the representative MPU for basic sequential control as well as the most cost-effective small PLC.

Applications :
Spinning machine, elevator control, packaging machine, material feeder, capacitor leg cutting machine, food processing machine, landscape fountain.

• Specifications :
  MPU points: 14 / 24 / 32 / 40 / 60
• Max. I/O points: 256
• Program capacity: 4K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
• Built-in 4-point high-speed counter

PLC Delta DVP-EH3 Series

The new generation DVP-EH3 PLC is the high-end model of the Delta DVP-E series.

It provides larger program capacity and data registers for more demanding and complex applications.

Applications :
High-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.

Features & Benefits :

Specifications :
Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
• Supports max. 4 hardware 200kHz high-speed counters
• Increases many motion control instructions to meet the applications that require high-speed and high-precision
• positioning control such as labeling machines, packaging machines and printing machines
• Offers linear / arc interpolation motion control
• Provides up to 16 external interrupt pointers

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
• Up to 4-level password protection protects your source programs and intellectual property

Outstanding Operation Performance

• CPU + ASIC dual processors support floating point operations.
• The max. execution speed of basic instructions is able to reach 0.24μs.

Flexible Function Extension Modules & Cards

• The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

PLC-Link

• C-Link allows the user to link up a max. 32 units to the network without having to install extra communication extension modules.

Brand-New High-Speed Extension Modules

• The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program.

PLC Delta DVP-EH Series

Digital modules (output/input/mix), analog modules (output/input/mix), temperature measurement/control modules, load cell modules, network modules, remote I/O communication modules

Applications :

Remote device monitoring, production line monitoring, printing machine, container filler (recipe application).

Specifications :

• Digital modules (output/input/mix): 8,16, 32, 48 I/O
• Analog modules (output/input/mix): 4 channel, 6 channel inputs (14-bit) / output (12-bit)
• Load cell modules (for EH3-L): Independent dual-channel high speed high accuracy load cell module with 24 bits resolution with 2.5ms response rate
• Temperature measurement modules: conversion time 200ms/channel, overall accuracy +/-0.6%, resolution RTD inputs Pt100 / Pt1000 / Ni100 / Ni1000 3850 PPM/°C, thermocouple inputs DJ, K, R, S, T, E, N type
• Network modules (for EH3-L): EtherNet, DeviceNet, PROFIBUS-DP, CANopen, RS-485, RS-422, BACnet MS/TP
• Remote I/O communication modules (for EH3-L): DeviceNet, PROFIBUS-DP, MODBUS TCP, EtherNet, RS-48

PLC Delta DVP-EC3 Series

EC3 series is the most economical solution for sequential control and communication monitoring and can operate independently, allowing the user to achieve stand-alone monitor, e.g. monitoring phototransistor coupler, proximity switch, optical sensor, indicator and illumination switch. Through serial ports, EC3 is able to connect to control devices such as PLC, frequency inverter and temperature controller, which can be said to be a programmable application solution that is cost-friendly and highly reliable.

Applications :
Single control unit, landscape fountain, building automation

• Specifications :
  MPU points: 10/ 14 / 16 / 24 / 32 / 60
• Max. I/O points: 60
• Program capacity: 4k steps
• COM ports: Built-in RS-232 and RS-485 ports (available in 16-60 point models); compatible with Modbus ASCII/RTU protocol
• Built-in 4 points of high-speed counters*:

PLC Delta DVP-20PM

The advanced PM series motion control MPU can become the motion extension module of another PM series MPU, very flexible in all kinds of applications.

Applications :
Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo.

Specifications :

• MPU points: 16
• Max. I/O points: 512
• Program capacity: 64K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• Data register: 10,000 words (latched)
• 500KHz high-speed pulse output:
  Built-in 2 groups of A/B phase differential signal ouput
  X-axis pulse output: (FP0+, FP0-), (RP0+, RP0-)
  Y-axis pulse output: (FP1+, FP1-), (RP1+, RP1-)
• Supports Manual Pulse Generator (MPG) and multi-point external signal inputs

PLC Delta DVP-15MC

DVP15MC11T is a type of multi-axis motion controller researched and produced by Delta autonomously on basis of CANopen field bus. It complies with CANopen DS301 basic communication protocol and DSP402 motion control protocol. In addition, it also supports standard instruction libraries defined by international organizations for motion control. It brings great convenience to user to learn and develop projects quickly. Maximum 24 axes can be controlled by means of Motion port. The single-axis motion instructions including velocity, position, torque and homing instructions as well as multi-axis instructions such as electronic gear, electronic cam, rotary cut and G code are supported.

Applications :

High-speed Cutting Machine, Digital Board Cutting Machine, CNC Lathe

Features & Benefits :

• Up to 24 real axes control (virtual axis no.: 1 ~ 32, can’t be repetitive with real axis no.)
• Built-in motion control instructions (supporting Jerk and BufferMode) and easy to use
• Supports encoder axis and virtual axis
• Single axis motion control instructions: speed, torque, homing, and position setup
• Application instructions: electronic gear, E-Cam, and rotary cut
• G-code: 8 axes linear / arc / helical interpolation
• Coordinates motion control instruction

Specifications :

• 1 GHZ high-speed floating point operation
• High-precision computing: supports LREAL (Double-precision floating -point format )
• Synchronization time: 4 axes in 2 ms / 8 axes in 4 ms
• Program capacity: 20 MB
• Data capacity: 20 MB
• 1 CANopen port as host or slave station
• 1 CANopen (Motion) communication port for motion control
• 16 high-speed inputs / 8 high-speed outputs
• 2 incremental encoder interfaces
• 1 SSI absolute encoder interface
• 2 Ethernet ports
• 1 SD card slot
• 1 RS-232 port and 1 RS-485 port
• Extension:
  • Left-side: Supports up to 8 DVP-S Series modules (master / slave / load cell modules)
  • Right-side: Compatible with DVP-S Series modules (240 I/O, 8 special modules)

PLC Delta DVP-10PM

This series highlights high-speed command execution speed (basic command LD for 0.1375μs, application command MOV for 2.1μs and 1MHz differential output*4) to achieve precise motion control.

Applications :

Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo.

Specifications :

• MPU points: 24
• Max. I/O points: 256
• Program capacity: 64k steps
• Built-in hardware digital filter for counting
• 6 high-speed counters (O.C. 200kHz*4, differential 200kHz*2), supporting U/D, U/D Dir, A/B, 4A/B counting modes
• 4 differential 1MHz outputs, supporting U/D, U/D Dir, A/B output modes
• Supports 1-speed (immediate stop after the mark arrives), 2-speed, zero return, MPG and single axis function
• Highly accurate PWM 200kHz output, resolution 0.3%
• Electronic gear function
• 8 high-speed captures (mark correction, frequency measurement), comparative output, mark/mask function (for bag making)
• 8 external interruptions for setting up rising- and falling-edge triggers, 1 timed interruption
• Highly efficient command execution. LD: 0.1375μs, MOV: 2.1μs

PLC Delta DVP-10MC

Features & Benefits :

• Up to 16 axes can be controlled through high-speed CANopen communication
• Provides E-Cam (2048 points), rotary cut and flying shear applications
• Compatible with DVP-S series left and right side modules for flexible applications

Application :
packaging machinery, rotary cut machines, panel saws, coil winding machines and bag making machines.

Specifications :

• Built-in 12 I/O points(8 sets of high-speed pulse inputs for interrupt function and 4 sets of high-speed outputs)
• Max. 480 I/O points
• Program capacity：Ladder 16k steps / Motion 1Mbyte
• Built-in Ethernet, RS-232 and RS-485 communication port and standard MODBUS ASCII/RTU communication protocol
• Flexible industrial network applications(provides DeviceNet Master/Slave, CANopen Master/Slave, PROFIBUS-DP Slave and many more modules)
• Provides standard CANopen communication cables, terminal resistors, distribution boxes and related accessories. Wiring is simple and easy.
• Synchronously controls 4 axes in 2ms and 8 axes in 4ms
• Compatible with G-Code
• Supports PLCopen standard function blocks for motion control, enhancing program editing efficiency

PLC Delta AS Series

Programmable logic controller (PLC) is a control system using electronic operations. Its easy storing procedures, handy extending principles, functions of sequential/position control, timed counting and input/output control are widely applied to the field of industrial automation control.

Delta’s DVP series programmable logic controllers offer high-speed, stable and highly reliable applications in all kinds of industrial automation machines. In addition to fast logic operation, bountiful instructions and multiple function cards, the cost-effective DVP-PLC also supports various communication protocols, connecting Delta’s AC motor drive, servo, human machine interface and temperature controller through the industrial network in to a complete “Delta Solution” for all users.

Compact Modular Mid-range PLC – AS Series

The Delta Compact Modular Mid-range PLC AS Series is a high performance multi-purpose controller designed for all kinds of automated equipment. It features Delta’s self-developed 32-bit SoC CPUs for enhanced execution speed (40 k steps/ms) and supports up to 32 extension modules or up to 1,024 inputs/outputs. The AS series provides accurate positioning control for up to 8 axes via CANopen motion network and max. 6 axes via pulse control (200 kHz). It is widely used in diverse automated equipment such as electronics manufacturing, labeling, food packaging, and textile machines.

PLC Delta AH Series

Programmable logic controller (PLC) is a control system using electronic operations. Its easy storing procedures, handy extending principles, functions of sequential/position control, timed counting and input/output control are widely applied to the field of industrial automation control.

Delta’s DVP series programmable logic controllers offer high-speed, stable and highly reliable applications in all kinds of industrial automation machines. In addition to fast logic operation, bountiful instructions and multiple function cards, the cost-effective DVP-PLC also supports various communication protocols, connecting Delta’s AC motor drive, servo, human machine interface and temperature controller through the industrial network in to a complete “Delta Solution” for all users.

Hot Swappable Mid-range PLC – AH Series

AH Series PLC provides automation solutions for high-level applications. The combination of modularized hardware structure, advanced functions, and the highly integrated software provides a system solution for process control applications. In addition to various function blocks (FB), excellent price/performance, and an abundant selection of extension modules, AH Series PLC also provides multi-axis motion control via motion network, such as EtherCAT, to perform high-speed, high-precision machine control. The exceptional system expandability also greatly reduces the system cost for a broad range of applications.

Photoelectric Sensor DELTA

Delta offers several types of photoelectric sensor products, including flat type, cylindrical type, lateral type and rectangular type, to meet a variety of customer demands.

The rectangular type is adaptable to a variety of industrial environments, while our new rectangular type (TEACH) provides a brand new exterior and a user-friendly TEACH button design as another sensor choice.

Flat type photoelectric sensors are easily installed on any equipment without space limitations.

The cylindrical type with M18 nickel coated brass allows customers to mount it on their machine easily, and the TEACH button design provides user-friendly control.

Features & Benefits :

• Variety of types for different applications
• Compact in size and easy to assemble
• IP67 and CE certification
• Electrical circuit protection

Applications :

Food and beverages, packaging, pharmacy, electronic component equipment, textile, rubber and plastics, warehouses, machine tools industries

Specifications :

• Voltage Range: 12~24 VDC ±10%
• Number of Outputs: NPN x 1 or PNP x 1 or Push-Pull x 1
• Output:
  • Max. durable pressure 30 V / 50 mA, residual voltage 1.5 V (Flat type, Lateral type)
  • Max. durable pressure 30 V / 100 mA, residual voltage 1.5 V (Rectangular type, Cylindrical type, New Rectangular type)
• Response Time: ON → OFF : 0.5 ms, OFF → ON 0.5 ms
• Light Source: 4 element, red LED (630 nm), infrared LED (850nm)
• Protection Circuit: Protection against reverse power connection, output overcurrent, power supply surges, output surges
• Operation Temperature: -25 ºC ~ 55 ºC, Storage Temperature: -25 ºC ~ 75 ºC
• Materials: Lens: PC; case: PBT
• Cables:
  • Rectangular type: 3 wires 2M PVC cable (through beam: transmitter- 2 wires 2M PVC cable), M8 connector (200mm cable)
  • New Rectangular type: 4 wires 2M PVC cable (through beam: transmitter- 2 wires 2M PVC cable), M8 connector
  • Flat type: 3 wires 2M PVC cable (through beam: transmitter- 2 wires 2M PVC cable), M8 connector (200mm cable)
  • Lateral type: 4 wires 2M PVC cable (through beam: transmitter- 2 wires 2M PVC cable), M8 connector (200mm cable)
  • Cylindrical type: 4 wires 2M PVC cable (through beam: transmitter- 2 wires 2M PVC cable), M12 connector
• Dimensions:
  • Flat type: 16 × 30 × 6.8 mm
  • Lateral type: 14 x 27 x 7 mm
  •  Cylindrical type: M18, length: 50mm
  •  Rectangular type: 32.8 × 11.2 × 21.1 mm, 32.8 x 11.2 x 17mm (new type with TEACH button)

Laser Displacement DELTA

Delta’s Laser Displacement precisely measures the changes in distance of target objects, with a measuring range from 30mm to 210 mm. To meet the demand of measurement accuracy, we provide three types of models that can be used in controlling, sorting, and inspection tasks in quality control, workflows and processes. Applications can be used on dimension, thickness, position, and shape measurements.

Features & Benefits :

• Aluminum case, strong structure
• Slim and small, easy to assemble
• High precision, average time setting
• IP67 and CE certification

Applications :

Food and beverages, packaging, pharmacy, electronic component equipment, textiles, rubber and plastics, warehouses, machine tool industries

Specifications :

• Detection range:
  • LD-040: 30 ~ 50mm
  •  LD-080: 55 ~ 105mm
  •  LD-150: 90 ~ 210mm
• Communication: Digital IO / MODBUS RS 485
• Voltage range: 12 ~ 24 VDC ± 10%
• Repeatability:
  • LD-040: 2 μm
  •  LD-080: 5 μm
  •  LD-150: 15 μm
• Sampling rate: 1 ms
• Linearity: ± 0.1%
• Dimensions: 55 x 42 x 24 mm
• Connection: 8 pin M8 Connector