WEISS Freely Programmable Indexers TW Series

A direct drive motor integrated with a high-precision gear, absolute encoder and built-in ­brake combined with a robust mechanical platform.

The TW sets new standards in the compact rotary indexing table-area in the following ­characteristics: dynamic, precision, user programmable and ease of use, power density. ­These products are designed to greatly outperform any pneumatic indexing solutions available.

Additional user benefits: Comparable in cost to pneumatic solutions, a clear cost advantage is developed through enhancement in productivity, lower operating cost and reduced ­maintenance cost.

THE TW AT A GLANCE

• User programmable
• Much faster than pneumatic solution
• Much more precise than pneumatic solution
• Higher power density than pneumatic solution
• Very little dwelltime
• Absolute encoder
• Precise zero-point through locating holes in the body
• No wear
• Precise teaching of each position
• Rigid stationary center section in various levels
• Electronic overload protection
• Any mounting position possible
• High energy efficiency
• Indexing in any angles possible

WEISS Freely Programmable Indexers TO Series

Direct drive rotary table with impressive dynamics and extremely high degree of repeat accuracy. Freely programmable and also suitable for use in clean rooms.

The direct drive rotary table allows the shortest switching times with the greatest precision. Its ability to cover a significantly more versatile range of tasks – including repeat use – helps you tap new added value potential.

THE TO AT A GLANCE

• Freely programmable angular positions and speeds
• Greatest efficiency
• Extremely dynamic (up to 600 cycles/min)
• Extremely high repeat accuracy
• Absolute measuring system on TO 150C / TO 220C
• High degree of reliability, long service life, zero backlash
• No wearing parts
• Compact design, minimum installation space required
• No cooling devices necessary
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers TH Series

The heavy duty ring TH combines free programmability and an extremely high level of torque with the ability to handle horizontal loads and high breakdown torque levels.

THE TH AT A GLANCE

• Freely programmable TH rotary barrel drives for horizontal loads and high breakdown torque levels
• Connection of different motor brands possible
• Extremely smooth and quiet running (70 dBA)
• Zero backlash thanks to multiple cam rollers tensioned against one another
• The highest parts and repeat accuracy
• Permanent status monitoring through WAS – WEISS Application Software
• Central bore for cable entries

WEISS Freely Programmable Indexers NR Series

Freely programmable rotary indexing ring with very large central opening, extremely flat design and a high level of parts accuracy.

The ring-shaped design allows extra free design space. The rotating aluminium ring can be adjusted to your specifications in terms of diameter and thickness.

THE NR AT A GLANCE

• Ring-shaped rotary indexing table with extremely large central opening (bore of up to 1750 mm possible)
• High level of parts accuracy due to drive being positioned far toward the outside
• Highly dynamic with smooth acceleration
• Connection of different motor brands possible
• Flat, compact design
• Fixed speed TR version also available
• Excellent price-performance ratio
• Absolute measuring system
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers NC Series

NOW WITH LARGE CENTRAL OPENING. THE NEW NC RANGE

The NC combines robustness and durability with the advantages of a user-programmable rotary table that offers a high level of torque. This is made possible by the latest generation of servo motor drives with integrated absolute value encoder and a drive cam with constant pitch. For applications requiring extreme precision, we offer the additional encoder option, which is connected directly to the drive cam.

The further refined NC range has been given a significantly larger central opening. The cables and hoses can now be guided downwards directly through the table or through the practical side channel. We have achieved this while maintaining the same external dimensions as its predecessors – which have now been replaced by the new range.

THE NC AT A GLANCE

• Freely programmable
• High level of torque
• Absolute position encoder
• High precision, rigid rotating plate bearing mounting
• Various sizes
• Powerful, standing centre part
• Connection of different motor brands possible
• Customer-specific servo motors
• High degree of synchronism
• High degree of repeat accuracy
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers CR Series

Flat heavy duty ring with large central opening. The extremely flat design frees up space and offers flexibility for creating ergonomically sound workplaces. Using the WAS control system, the ring is completely freely programmable.

THE CR AT A GLANCE

• Unmatched e-stop times
• Large central opening for cable entries
• Freely programmable
• Extremely smooth and quiet running (<70 dBA)
• Zero backlash thanks to multiple cam rollers tensioned against one another
• Extremely accurate and smooth
• Cam drive located far toward the outside for precision and dynamics
• Permanent status monitoring through WAS – WEISS Application Software
• Drive can be connected directly to robot control systems
• Connection of different motor brands possible

WEISS Fixed Stations Indexer TR Series

Rotary indexing ring with large open center. Extremely low profile design with high level of accuracy.

The ring-shaped design allows extra free design space. The rotating aluminium ring can be adjusted to your specifications in terms of diameter and thickness.

THE TR AT A GLANCE

• Ring-shaped rotary indexing table with extremely large open center of up to 1750 mm possible
• High level of accuracy due to drive being positioned near outer edge
• Highly dynamic with smooth motion
• Low profile, compact design
• Freely programmable NR version also available
• Tailor-made control system components (EF; TS)

WEISS Fixed Stations Indexer TC Series

NOW WITH LARGE CENTRAL OPENING. THE NEW TC RANGE

Our electromechanical TC range: legendary reliability with exceptionally robust quality. In use across the globe for a wide range of automation requirements in the most diverse of sectors.

We have given the new TC range a significantly larger central opening for the 120 – 320 sizes. The cables and hoses can now be guided downwards directly through the table or through the practical side channel. We have achieved this while maintaining the same external dimensions as its predecessors – which have now been replaced by the new range.

Alongside automatic nest detection, with the new DriveCliq encoder option in connection with the EF2 rotary table control system we now also offer cam switching mechanism functionality, which permits a significant increase in the effectiveness of the overall system.

As always, we extend the warranty to four years when using one of our rotary table control systems.

THE TC AT A GLANCE

• Highest reliability
• Powerful, standing centre part
• Lateral opening in the housing
• Large central bore for cable feed-through
• Plate gasket with soiling lip
• Precise, high-load plate bearing
• Pin-mounted cam rollers
• High degree of precision – with even greater precision available on request – always with approval certificate
• EWR electronic wear compensation through tailor-made control components (EF; TS)

WEISS Fast Cycling Linear Assembly System

The advantages of the LS280 and its extremely high productivity result from a completely new, elegant operating principle. It combines a rotary indexing table with a transfer system, i.e. a cam drive and belt system. This leads to a radical reduction of transport times and absolutely jerk-free – at up to 60 cycles/minute

THE CR AT A GLANCE

• Proven cam drive
• Smooth, impact free motion sequence
• Short workpiece exchange times
• High positioning precision without additional stopping or indexing modules
• High level of availability
• Modular system design
• Autonomous functional assembly cells
• Adjustment of varying processing times
• High degree of reusability
• Stable steel fabricated base frames
• High reliability
• Maintenance free
• Complete functional and quality inspection
• Short realisation time
• Fast build-up assembly
• WAS – WEISS Application Software for easy and fast start-up
• Convincing price / quality ratio
• ESD-capability

Timer/Counter/Tachometer CTA Series

CTA Timer/Counter/Tachometer is able to receive external input signals and calculate the times of events, frequency and driving speed. CTA can be applied to batch counting, total counting, length measurement, position control, accurate timing, rotation speed and so on.

CTA Timer/Counter/Tachometer features easy and handy parameter settings and tuning and are certified by international standards CE and UL.

Applications :

Label printers, cut-to-length machines

Features & Benefits :

CTA Timer/Counter/Tachometer features easy and handy parameter settings and tuning and are certified by international standards CE and UL.

Specifications :

• Panel size: 48mm x 48mm
• Power input: 100~240VAC, 50/60Hz or DC24V
• Range of input voltage: 85%~110%, rated voltage or DC21.6V~26.4V
• Power consumption: less than 10VA or 5W
• External power supply: 12VDC ± 10%; 100mA
• Display: Double-line 6-digit LCD display
• NPN input: ON impedance 1K ohm max. ON residual voltage: 2V max
• PNP input: high level: 4.5~30VDC; low level: 0~2VDC
• Dielectric strength: 2,000VAC; 50/60Hz for 1 minute

Text Panel Delta TP08G-BT2 Series

The screen of TP08 series can display eight lines text or message at the same time. The series not only has the features of light weight, cost-effective price, good flexibility in use, and easy-to-control operation, but also supports various communication protocols, macro commands and software screen change functions.

Specifications :

• 3.8″ STN-LCD
• Resolution: 240 x 128 dots
• Built-in 1,024KB flash memory
• 24 user-defined function keys
• Built-in RS-232 and RS-422 / RS-485 ports
• Supports recipes and macro functions

Text Panel Delta TP04P Series

The 4-Line Text Panel HMI with Built-in PLC TP04P Series’ adopts a built-in DIO/AIO and combines the functions of a programmable logic controller and touch panel in one device. This series’ screen displays text or messages with four lines at the same time. The TP04P Series is lightweight, flexible in use, provide easy-to-control operation, and also support various communication protocols.

Specifications :

• Adopts the core of the DVP-SS2 Series PLC: program capacity: 8 k steps / D device: 5k words
• Provides 2 sets of 10 kHz high-speed pulse input
• 4.1″ STN-LCD
• Provides 0 ~ 9 numeric keys with user-defined function
• Built-in USB port for program upload/download
• Built-in RS-485 port*2
• Supports MODBUS ASCII/RTU modes
• User-defined boot screen available
• Built-in real time clock (RTC)
• Digital and analog I/O terminals available