AUTOMATION JAYA

Rabu, 28 Februari 2024

Electro Pneumatic Training System

Digunakan untuk pembelajaran mengenai suatu sistem elektro pneumatik lengkap beserta
Ÿ DC power:Input, AC220V, 50Hz/60 Hz
Ÿ Output: DC 24V/3A
Ÿ Air compressor:
Ÿ Power: AC 220V±10% 50Hz/60Hz Ÿ Motor power: 600W
Ÿ Nominal volume: 9L normal
Ÿ Output voltage 0.7 MPa
Ÿ Noise degree: 66 dB
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Programmable Logic Controller Training Set

Digunakan sebagai perangkat untuk pelatihan penggunaan

Ÿ Programmable Logic Control (PLC).
Ÿ Input power: 3 Phase five-wire AC 380V±10%
50Hz/60Hz
Ÿ Output power:
Ÿ AC 380V safety terminal output
Ÿ AC 220V safety terminal/socket output
Ÿ DC 0-10V safety terminal output
Ÿ DC 0-20mA safety terminal output
Ÿ Capacity: < 1 kVA
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electronic Skills and PCB Production Process, Training Device

Digunakan sebagai perangkat untuk pelatihan cara pembuatan PCB dan rangkaian listrik.

Ÿ Input power: single-phase, three-wire AC 220V±10% 50Hz/60Hz Ÿ Output power: AC 220V safety

Ÿ socket output
Ÿ Capacity: <1.5KVA
Ÿ Power box provides low-voltage
Ÿ power supply module: Low voltage AC power: 0V, 3V, 6V, 9V, 12V, 18V, 24V, 36V, current 2A.
Ÿ DC power supply: 1.25 ~ 30V / 1.5A continuously adjustable.,
Ÿ intelligent dual-display voltage ammeter (external test), with automatic overload protection.
Ÿ Signal generator: frequency range 0-6Mhz continuously adjustable.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

MCU Training Set

Digunakan sebagai perangkat untuk pelatihan/percobaan
- Ÿ tentang micro computer dasar.
- Ÿ Power output:
- Ÿ ± 5 V / 1 A dc voltage source
- Ÿ ± 12 V / 1 A dc voltage source
- Ÿ 5 V / 3 A dc voltage source
  Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Digital Circuit Training Kit

Digunakan sebagai perangkat untuk pelatihan tentang rangkaian digital.

Ÿ Input power: single-phase, three-wire AC 220V±10%,
50Hz/60Hz
Ÿ Output power : DC±5V continuously adjustable,
Ÿ DC±12V, DC+5V─+27V Continuous adjustable DC
Ÿ power supply
Ÿ Capacity : < 200VA
Ÿ One set adjustable signal source : 2—20KHZ, adjustable
amplitude.
Ÿ Three kinds of signal output , the frequency coarse and fine
tune
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Analog Circuit Training Kit

Digunakan sebagai perangkat untuk pelatihan tentang rangkaian analog.

Ÿ Input power : single-phase, three-wire AC220V±10%
50Hz/60Hz
Ÿ Output power : DC±5V continuously adjustable,
Ÿ DC±12V , DC+5V -+27V Continuous adjustable DC power
supply
Ÿ Capacity : < 200VA
Ÿ Adjustable signal source : 2— 20KHZ, adjustable amplitude,
Ÿ three kinds of signal output, frequency coarse and fine tune

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motorcycle Charging System Simulator

untuk mempelajari cara kerja sistem pengisian pada sepeda motor dan dapat menganalisa gangguan pada sistem pengisian tersebut

Ÿ Composition

Ÿ 1) Voltage meter
Ÿ 2) Current meter
Ÿ 3) Generator stand :
Ÿ 4) Tester cable clip : 2ea
Ÿ 5) Lamp and switch attached Ÿ 6) Generator staring motor
Ÿ 2 Training Contents

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motorcycle Fuel Injection System Trainer

Untuk memahami dan mengenal cara kerja sistem injeksi bensin dan komponen komponennya secara detail

Ÿ Components:
Ÿ injectors 1 pcs,

Ÿ fuel pumps 1 pcs,
Ÿ spark plugs 1 pcs,
Ÿ coil 1 pcs,
Ÿ throttle body 1 pcs,
Ÿ a bank angle sensor 1 pcs,
Ÿ engine oil temperature 1 pcs, Ÿ the pickup coil 1 pcs,

Ÿ ECM 1 pcs,
Ÿ diagnostic connector 1 pcs, Ÿ engine check 1 pcs,
Ÿ 12V - 3.5Ah batteries 1 pcs,

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Engine Sepeda Motor 4 Tak Life with Fault Simulator

Untuk mengetahui dan memahami kerja dari sistem pelumasan pada sepeda motor

Ÿ 4-stroke live engine model, with all components using new 100% part, not a remanufactured /recycled Engine

Ÿ a) Engine type: SOHC, single cylinder, air cooling Ÿ b) Fuel system: Fuel Injection / PGMFI
Ÿ c) Cylinder volume: approx. 108.2 cc
Ÿ d) Diameter x Step: approx. 50x55.1 mm

Ÿ e) Power: approx. 6.38Kw (8.68PS) / approx. 7500 rpm Ÿ f) Torque: approx. 9.01 Nm / approx. 6,500 rpm
Ÿ Transmission
Ÿ a) Transmission: Automatic V belt

Ÿ b) Clutch: Centrifugal dry type
Ÿ Machine holder frame from approx. 3mm iron plate material, main supporting frame of iron pipe material with approx. 3.5 mm thickness and L plate for base frame with approx. 1.5 mm thickness
Ÿ Surface: Manufacture painting/powder coating
Ÿ 2 training contens

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Engine Sepeda Motor 4 Tak On Stand (Non Life)

Untuk mempelajari dan mengenal mekanisme katup yang terdapat pada engine 4 tak.

Ÿ Made from all new components (not recycled/repainting)

Ÿ Specification
Ÿ Composition : 4 Stroke Engine ASSY
Ÿ Single phase 220V speed control motor is attached
Ÿ Training Contents
Ÿ Stroke education, Intake, Exhaust structure.
Ÿ Desktop model, component placed on stainless plate

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Air Conditioning System Simulator

Ÿ Untuk mempelajari secara menyeluruh sistem A/C pada kendaraan dilengkapi dengan wiring diagrammnya, dan penunjuk tekanan untuk masing masing saluran A/C

Ÿ Compressor: approx. 5HP motor, inverter RPM control type.
Ÿ Specification
Ÿ Composition : Compressor, condenser, dryer, expansion valve, the orifice tube, the evaporator,Blowers, piping, cooling fans, the unit, the control panel, Motor with speed control, pressure (high-1, low-3), approx. 7 temperature gauge, etc. approx. 10 Fault insertion available approx. 3 PCB board available to safety protection PCB Board is connect PC with USB

Ÿ 5 Training Contents
Ÿ Fault Error dapat disimulasikan melalui aplikasi Android
Ÿ Menggunakan Tab Android 6.5 inchi
Ÿ RAM 1 GB
Ÿ Koneksi nirkabel dengan Bluetooth dan Wifi

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motronic System Simulator

Ÿ Untuk mempelajari sistem pengapian elektronik dengan tipe motronik
Ÿ Composition : Crank sensors, injectors, spark plugs, fan, relay, RPM meter, self- diagnosis jack, emergency switches, fuses, Key switch, ATS, TPS,WTS, MAP, HO2S

2 Training Contents
Refrigerant mass flow
Volumetric compression effi ciency and its trend versus compression ratio

condenser
Ÿ - Heat losses through the room walls

Ÿ Supplied with:

- Condenser exchange surface
- Heat transfer coefficient between air and refrigerant in the

Ÿ General Refrigeration Manual Experimental handbook Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

DLI Igniton System Trainer

Ÿ Untuk mempelajari cara kerja sistem pengapian elektrik dengan model tanpa distributor (CDI)
Ÿ Composition : Crank sensors, injectors, spark plugs, fan, relay, RPM meter, self- diagnosis jack, emergency switches, fuses, Key switch, ATS, TPS, WTS, MAP, HO2S
Ÿ 2 Training Contents
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Basic Electric Circuit Trainer

Mempelajari prinsip dasar kelistrikan otomotif Ÿ Composition:
Ÿ Voltage: 30A,
Ÿ Working voltage: DV12V,
Ÿ Relay capacity : approx. 30A,
Ÿ Lamp : approx. 1.4W and 55W, Ÿ Main fuse : approx. 30A,
Ÿ Relay fuse : approx. 10A,
Ÿ 1.0SQ Jump wire : 48 set
Ÿ 2 Training Contents
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Wheel Balancer

Digunakan sebagai perangkat untuk pelatihan/percobaan identifikasi struktur dasar dan prinsip kerja pada sistem pendingin domestik 2 pintu
Training Program:

Ÿ • Domestic refrigerator operation analysis
Ÿ • ON-OFF regulation the refrigerated room thermostat
Ÿ • Evaluation of the cycle pressures and of the
corresponding evaporation condensation
Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Tyre Changer

Untuk bongkar/pasang ban pada peleknya Ÿ Power supply : 110V / 220V / 380V
Ÿ Motor power : 0.75 - 1.1 KW
Ÿ Air supply : 8-12 Bar

Ÿ Noise level : < 70 dB
Ÿ Rim material : Steel, Al., Alloy
Ÿ Wheel diameter : 1020 mm (40") Ÿ Wheel width : 12"
Ÿ Inner clamp : 12"-26"
Ÿ Outer clamp : 10"-24"

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

ABS Simulator with Fault Diagnosis with 4 axis

Untuk mempelajari sistem kerja rem ABS lengkap dengan sirkuitnya, tekanan hidrolisnya, dan dapat melakukan trouble shooting.
Ÿ Driven by reduction motor single phase 220V

Ÿ Training Contents
Ÿ Various element by self-diagnosis.
Ÿ Removing the air from the brake.
Ÿ Replacing brake oil.
Ÿ Replacing pad.
Ÿ Hydraulic system Inspection.
Ÿ ABS circuit verification.
Ÿ Able to demonstrate the failure test. (arbitrarily)

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Sensor Measuring System

Untuk mempelajari sensor-sensor yang terintegrasi dengan EMS, sehingga sejauh mana sensor bekerja/tidak dapat terekam oleh sistem EMS
Composition :

Ÿ Crank angle sensor, A/T pulse generator sensor, cam position sensor, ABS wheel sensor, humidity sensor, AQS sensor, Engine temperature sensor, Automatic light sensor, knock sensor, speed sensor, Accelerator position sensor, oxygen sensor, throttle position sensor, air flower sensor, map sensor, safety sensor

Technical data :
Ÿ • Input power : 220V±10%, 50Hz
Ÿ • Operating condition : environment temperature 10~30 °C, relative humidity < 75% (25°C)
Ÿ Supplied with:
Ÿ General Refrigeration Manual
Ÿ Experimental Handbook
Ÿ Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Gasoline Fuel Injection Control System with Auto Fault

Untuk mempelajari kinerja sistem injeksi elektronik pada engine bensin dilengkapi dengan simulasi deteksi kegagalan sistem

Composition :
Ÿ Fuel Tank, Fuel Pump, pressure regulators, ECU, Injector, fan, crank gear, cam gear, tester for fuel injection

Ÿ 1) Ignition circuit : Coil, ignition plug, air intake
Ÿ 2) Sensor : Temperature sensor, oxygen sensor, air flow sensor, air temperature sensor,an engine temperature sensor, exhaust gas sensor, crank sensor and a cam sensor,
Ÿ Power supply, Cabinet Type storage space with 2 door
Ÿ Auto Fault Function
Ÿ Training Contents
Ÿ Measure the waveforms and check the changes according to RPM speed.
Ÿ Supplied with:
Ÿ General Refrigeration Manual Experimental handbook Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Transformer Maintenance and Test Training System

Digunakan untuk pembelajaran mengenai motor listrik dan transformator, antara lain : melepas lilitan motor, menggulung ulang, merakit, analisa data, dan keterampilan lain mengenai transformator 1PH, motor induksi 1PH, motor induksi 3PH, dan sebagainya.

Ÿ Input power: three-phase, five-wire 380V±10% 50Hz/60Hz
Ÿ Output power : leakage protection (action current ≤ 30mA), overcurrent protection, fuse protection, AC220V safety terminal isolation output, AC24V safety terminals isolation output, DC220V safety terminals isolation output
Ÿ Capacity : < 1.5KVA
Ÿ Part list:
Ÿ 3PH AC adjustable power supply, DC power supply, DC measurement instrument, AC measurement instrument & digital multi-function wattmeter, Motor power supply and test instrument, Motor inserting tools, Manual digital winding counter.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Programmable Logic Controller Training Set

Digunakan sebagai perangkat untuk pelatihan penggunaan Programmable Logic Control (PLC).
Ÿ Input power: 3 Phase five-wire AC 380V±10% 50Hz/60Hz
Ÿ Output power:

Ÿ AC 380V safety terminal output
Ÿ AC 220V safety terminal/socket output
Ÿ DC 0-10V safety terminal output
Ÿ DC 0-20mA safety terminal output
Ÿ Capacity: < 1 kVA
Ÿ Part list: Workbench, Power box, PLC module, Motor control module, Mail sorting module, Traffic lights module, Robot control module, Automatic feed loading module, Processing center module, Sky tower light module, Rolling machine module, Intermediate relay module, Self-lock button module, Self- recovery button module, Instruction module, Power adapter module, Test line, CD, Download line, User Manual.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electrical Connection of Refrigeration Compressor

Digunakan sebagai perangkat untuk pelatihan/percobaan mengetahui karakteristik komponen listrik pada kompresor
Learning objectives/experiment:
Ÿ Read, understand, wire and test electric circuit diagrams for refrigerant compressors

Ÿ Design and operation of electrical components of refrigerant compressors Ÿ Start-up relay , Start-up capacitor , Overheat protection , Automatic fuse , Pressure switch , Thermostat
Ÿ Design and testing of a safety chain

Ÿ Representation methods in electrical engineering Ÿ Symbols , Circuit diagram
Ÿ Safety aspects when handling mains voltage

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electrical Faults in Simple Air Conditioning System

Digunakan sebagai perangkat untuk pelatihan/percobaan mengidentifikasian kesalahan instalasi listrik pada sistem pendingin AC
Learning objectives/experiment:
Ÿ Electrical design and principle of operation of simple air conditioning systems

Ÿ Read and understand electrical circuit diagrams
Ÿ Design and operation of electrical components in an air conditioning system
Ÿ Start up capacitor, Start up relay, Overheat protection
Ÿ Main contractor, Automatic fuse, On/off switch
Ÿ Speed switch, Thermostrat
Ÿ Fault finding in electrical components
Ÿ In idle state
Ÿ Under mains voltage

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Electrical Installation in Refrigeration Systems

Digunakan sebagai perangkat untuk pelatihan/percobaan instalasi tenaga listrik pada sistem pendingin kulkas

Ÿ Learning objectives/experiment:
Ÿ Read, understand, wire and test electric circuit diagrams

Ÿ Design and operation of electrical components from refrigeration :

Ÿ Start up capacitor
Ÿ Operating capacitor Ÿ Start up relay
Ÿ Time relay
Ÿ Timer
Ÿ Circuit breaker

Ÿ Start up current limiter Ÿ Contractors
Ÿ Pressure switch
Ÿ Thermostrat

Ÿ Solenoid valve
Ÿ - Design and testing of a safety chain
Ÿ - Star/delta connection
Ÿ - Change of direction of rotation in an alternating

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Deep Freezing Trainer

Digunakan sebagai perangkat untuk pelatihan/percobaan identifikasi struktur dasar, prinsip kerja dan pemeliharaan pada sistem pendingin Deep freezing Training Program:

> Studying the operation of an ice deep freezer

> Analyzing the system behaviour versus the variation of the temperature of feeding water and of ambient temperature
> Using the refrigerant pressure-enthalpy diagram for work and diagnosis plotting the refrigeration cycle

> Data acquisition and calculation of: Heat balances corresponding to evaporator, condenser, compressor, Refrigerant mass flow , Volumetric compression efficiency.
> Supplied with: General freezer manual, Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Ice Maker Trainer

Analyzing the system behaviour versus the variation of the temperature of feeding water and of ambient temperature
> Using the refrigerant pressure-enthalpy diagram for work and diagnosis plotting the refrigeration cycle.

> Data acquisition and calculation of:
> Heat balances corresponding to evaporator, condenser, compressor
> Refrigerant mass flow
> Volumetric compression efficiency.
> Supplied with: General refrigeration manual , Experimental handbook, Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Industrial Refrigeration Training

Digunakan sebagai perangkat untuk pelatihan/percobaan identifikasi struktur dasar, prinsip kerja dan pemeliharaan pada sistem pendingin skala industri

Training Program:

> Plant starting and safely devices intervention checking

> Studying the operation of a thermostatic Expansion valve and its calibration

> Studying the operation of an evaporating pressure controller and its calibration

> On-off control: Refrigerated room thermostat

> Correlation between evaporation temperature, room temperature and relative humidity in positive temperature rooms

> Analyzing the system behavior versus the variation

> Data acquisition and calculation

> Supplied with: General refrigeration manual, Experimental handbook , Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Trainer for The Study of A Commercial Multiple Evaporator Refrigerator

Digunakan sebagai perangkat untuk pelatihan/percobaan mempelajari sistem operasi mesin pendingin dengan multi evaporator

Training Program:
> Plant starting and verification of the safely devices intervention

> Study of the operation of a thermostatic expansion valve
> ON-OFF control
> Analysis of the system behavior at variation of: Number of evaporators, condenser evaporations Air flow, thermostatic valves Superheat
> Drawing the cycle in the pressure-enthalpy diagram of the refrigerant gas Ÿ Data collection and calculation of: Thermal balances at the evaporators, condenser, compressor, Refrigerant mass flow, compressor Volumetric efficiency, thermostatic valve superheat.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Domestic Air Conditioner Trainer with Inverter

Digunakan sebagai perangkat untuk pelatihan/percobaan identifikasi struktur dasar dan prinsip kerja pada system pendingin udara domestik

Training Program :

> Plantstartingandsafetydevicesinterventionchecking
> Studyingtheoperationofasplit-typeairconditionerinverter
> Operationincooling,DehumidificationandHeatingmodes
> ON/OFF control : Analysis of the variations of compressor r.p.m versus the thermal jump between set and detected temperatures
Ÿ Examiningthesystembehaviorversusthevariationsof:Operatingmode,Evaporator flow rate, Set-point temperature
> Plottingtherefrigerationcycleonrefrigerantpressure-enthalpydiagram
> Data acquisition and calculation of :Heat balances corresponding to evaporator, condenser, compressor, Refrigerant mass flow, Volumetric compressor efficiency
> Supplied with: General air-conditioner manual, Experimental hand book, Supply software which can monitor voltage, current, frequency, power, power factor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

General Air Conditioning Trainer

Digunakan sebagai perangkat untuk pelatihan/percobaan identifikasi struktur dasar dan prinsip kerja pada system pendingin udara umum TrainingProgram :

> Usingthepsychrometriccharttostudythetransformationstheairundergoesinthe different sections of and air handing unit, that is : sensible heating, steam humidification, cooling and dehumidification.

> Assessingtheheatbalancescorrespondingtothedifferentsectionsoftheairhanding unit

> AnalyzingtheoperationoftemperatureandhumiditycontrollersforAHU

> Directandreverseactingproportionalcontrol

> ON/OFFstepcontrol

> Damperstemperaturecontrol

> Suppliedwith:Generalrefrigerationmanual,Theoretical-Experimentalhandbook

> Supplysoftwarewhichcanmonitorvoltage,current,frequency,power,powerfactor, pressure, flow, etc, it can be displayed on PC in real time, and can be printed.

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Kontak Kami

Rabu, 28 Februari 2024