Kontak Kami

KONTAK KAMI : Telpon : 02126071413 Hp/WhatsApp : 081212269831 Perwakilan Jakarta : Gedung LTC Glodok Lantai 1 Blok C30 No.31 Jl.Hayam Wuruk No.127 Jakarta , Indonesia

Kamis, 29 Februari 2024

Motor Starter & Alternator Test Bench

 

Ÿ Untuk mendiagnosa kekuatan motor starter,mengetahui voltage dan arus yang diterima maupun yang dikeluarkan oleh motor starter
Ÿ Composition
Ÿ 1) Voltage meter : approx. 50V
Ÿ (digital type)
Ÿ 2) Current meter : approx. 500A
Ÿ (digital type)
Ÿ 3) Stand : 1ea, Tester cable clip,
Ÿ Operation lamp, Switch, Generator motor
Ÿ 2 Training Contents
Ÿ Manual Book

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Lighting Electrical Circuit System Trainer

 

Ÿ Mempelajaridasarkelistrikanlampukendaraan 

Ÿ Composition:Taillight,FogLights,
Ÿ DirectionLight,Horn,Wiper
Ÿ 1TrainingContents

Ÿ ManualBook
Ÿ ModulBasicLightingElectricalSystem

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Basic Electric Circuit Trainer

 

  1. Ÿ Mempelajari prinsip dasar kelistrikan otomotif
    Ÿ Composition: voltage: 30A, Working voltage: DV12V,
    Ÿ Relay capacity : approx. 30A, Lamp : approx. 1.4W and 55W, Main fuse : approx. 30A, Relay fuse : approx. 10A, 1.0SQ Jump wire : 48 set

    Ÿ 2 Training Contents
    Ÿ Manual Book
    Ÿ Modul Automotive Basic Electrical

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

ABS Simulator with Fault Diagnosis with 4 axis

 

  1. Ÿ Untuk mempelajari sistem kerja rem ABS lengkap dengan sirkuitnya, tekanan hidrolisnya, dan dapat melakukan trouble shooting. Ÿ Driven by reduction motor single
    Ÿ phase 220V Training Contents
    Ÿ Various element by self-diagnosis.
    Ÿ Removing the air from the brake.
    Ÿ Replacing brake oil.
    Ÿ Replacing pad.
    Ÿ Hydraulic system Inspection.
    Ÿ ABS circuit verification.
    Ÿ Able to demonstrate the failure test.
    Ÿ (arbitrarily)
    Ÿ Manual Book
    Ÿ Modul ABS Simulator with Fault
    Ÿ Diagnosis with 4 axis

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Commonrail Diesel Test Bench

 

  • Ÿ  Untuk kalibrasi dan analisa pompa dan injector diesel yang sudah dikontrol oleh komputer, dan mengkalibrasi sesuai dengan standar bawaan pabrik.

  • Ÿ  Testingpumpandtestinginjector.

  • Ÿ  Technicalparameters:

  • Ÿ  1.Motorpower:approx.7.5KW

  • Ÿ  2.Electronicpower:3phase380Vor1phase220V

  • Ÿ  3.Motorspeed:0-4000RPM

  • Ÿ  4.Presureadjustment:0-2000bar

  • Ÿ  5.Flowtestingrange:0-600ml/approx.1000times

  • Ÿ  6.Flowmeasurementaccuracy:approx.0.1ml

  • Ÿ  7.Coolingsystem:fanorforcedcooling

  • Ÿ  8.ManualBook

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Automotive Sensor Simulator

 

  1. Ÿ Untuk mempelajari sensor-sensor secara khusus yang telah dikontrol oleh EMS, dilengkapi dengan instrumen pengukuran.
    Ÿ Composition : Crank angle sensor,

    Ÿ A/T pulse generator sensor, cam position sensor, ABS wheel sensor, humidity sensor, AQS sensor, Engine temperature sensor, Automatic light sensor, knock sensor, speed sensor, Accelerator position sensor, oxygen sensor, throttle position sensor, air flower sensor, map sensor, safety sensor

    Ÿ 10 Training Contents 

    Ÿ Manual Book
    Ÿ Modul EMS

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Advanced Electro Pneumatic Training System



Ÿ Digunakan sebagai perangkat pelatihan
Ÿ pneumatik tingkat lanjut dimana menggunakan PLC

Ÿ DC power:

Ÿ input: AC 220V, Output: DC 24V/3A

Ÿ Air compressor: power: AC 220V±10% 50Hz motor power: approx. 600W

Ÿ Noal volume: approx. 9L

Ÿ noal output pressure approx. 0.7MPa,noise degree: approx. 66dB

Ÿ Par list:

Ÿ Workbench

Ÿ Silence Air compressor

Ÿ Manifold block

Ÿ Double-acting cylinder

Ÿ Single-acting cylinder 5/3 solenoid directional valve

Ÿ central vented 5/3 solenoid directionalŸ valve

Ÿ central exhaust 5/3 solenoid directiona Valve

Ÿ central pressure


Ÿ 5/2 single solenoid shuttle valve


Ÿ 5/2 double solenoid shuttle valve


Ÿ 3/2 single solenoid shuttle valve NC

Ÿ 3/2 single solenoid shuttle valve

Ÿ NO Mushroom button valves

Ÿ 5/2 handle shuttle valve, 5/3

Ÿ handle shuttle valve, Single

Ÿ pneumatic control 3/2, Double

Ÿ pneumatic control 3/2, Single

Ÿ pneumatic control 5/2, Double

Ÿ pneumatic control 5/2, Filter,

Ÿ regulator and lubricator ,

Ÿ Reducing valve, One-way valve,

Ÿ Pressure gauge, One-way throttle

Ÿ valve, 3/2 knob valve, 3/2 Stroke valve type A

Ÿ 3/2 Stroke valve type B, 3/2 button valve

ŸTime delay valve Sequence valve

Ÿ "And" gate-type dual pressure Valve

Ÿ “Or” gate-type shuttle valve Quick escape valve

Ÿ Micro switch valve (left trigger) Micro switch valve (Right trigger) Photoelectric Sensor Capacitivesensor

Ÿ Conductive sensor Testwire

Ÿ PLC module

Ÿ PLC program software Download wire

Ÿ DC power

Ÿ Relay

Ÿ Button switch

Ÿ HoseŠ¤4 black&blue 50m HoseŠ¤6 blue 20m

Ÿ 4T valve

Ÿ T connection

Ÿ APG reducing straight coupling Tools

Ÿ Manual


Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831


Step Motor Training Set

 


  • Ÿ  Digunakan sebagai perangkat untuk pelatihan pengendalian pergerakan pada program menggunakan motor stepper

  • Ÿ  Inputvoltage:

  • Ÿ  singlephaseAC220V+10%

  • Ÿ  50Hz;SafetyProtection:overcurrent

  • Ÿ  DC:DC24VPower

  • Ÿ  "Screwstroke:approx.300mm

  • Ÿ  Lead:approx.5mm”

  • Ÿ  Partlist:

  • Ÿ  PLC, switching power supply,sensor part, stepper

    drive module, stepper motors and other components. Training sets using a special mold profiles, anodized coating processing, scientific structure, the bottom adjuster, height adjustable, to ensure a smooth degree, bracket aluum structure (surface electrophoresis). Manual book, Experiment module.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Pneumatic Training System


 

Ÿ Digunakansebagaiperangkatuntukpelatihanpneumatikdasar. 

Ÿ Powerunit-aircompressor(Basicconfiguration

Ÿ icomputers)
Ÿ Powersource:AC220V±10%50Hz/60Hz

Ÿ Motorpower:480W
Ÿ Noalvolume:approx.6LRatedoutputpressure:approx.0.85MPa 

Ÿ Partlist:
Ÿ Workbench,SilentAircompressor,Manifoldblock,
Ÿ Double-actingcylinder,Singleactingcylinder,Mushroombutton
Ÿ valves,3/2buttontypemodule,
Ÿ 5/3handleshuttlevalve,5/2
Ÿ handleshuttlevalve,Single
Ÿ pneumaticcontrol3/2,Double
Ÿ pneumaticcontrol3/2,Single
Ÿ pneumaticcontrol5/2,Double
Ÿ pneumaticcontrol5/2,Reducing
Ÿ valve,One-wayvalve,Pressure
Ÿ guage,One-waythrottlevalve,
Ÿ 3/2strokevalve,Timedelay
Ÿ valve,Sequencevalve,"And"Gate
Ÿ typedualpressurevalve,
Ÿ "Or"Valve,Quickescapevalve,
Ÿ HoseŠ¤4,HoseŠ¤6,4Tvalve,"T”
Ÿ Connection,APGreducing
Ÿ straightcoupling,Toolkits,
Ÿ Pneumaticsimulatorsoftware.
Ÿ Manualbook,Experimentmodule

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

MCU Training Set

 

  • Ÿ  Digunakan sebagai perangkat untuk pelatihan/percobaan tentang micro computer dasar.

  • Ÿ  Poweroutput:

  • Ÿ  ±5Vdcvoltagesource

  • Ÿ  ±12Vdcvoltagesource

  • Ÿ  Partlist:

  • Ÿ  Workbench

  • Ÿ  PowerSupply

  • Ÿ  Signalgenerator

  • Ÿ  DigitalCircuitcommonexperimentbox

  • Ÿ  Gatecircuitexperimentbox

  • Ÿ  Triggercircuitexperimentbox

  • Ÿ  Digitallogiccircuitexperimentbox

  • Ÿ  Pulsecircuitexperimentbox

  • Ÿ  Componentsbox

  • Ÿ  Analogcircuitexperimentbox

  • Ÿ  MCUmodule

  • Ÿ  Convertandextendmodule

  • Ÿ  Sensoradaptormodule

  • Ÿ  RelayModule

  • Ÿ  Commandmodule

  • Ÿ  Indicatormodule1

  • Ÿ  Indicatormodule2

  • Ÿ  Motormodule

  • Ÿ  Motorexperiments

  • Ÿ  Towerlight

  • Ÿ  TrafficlightSimulator

  • Ÿ  Cableset

  • Ÿ  Manualbook,Experimentmodule.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Frequency Control Speed Regulation Experiment System

 


  1. Ÿ Digunakan sebagai perangkat untuk pelatihan sekaligus alat ukur pada pelatihan / percobaan pengaturan kecepatan dari kinerja sistem kontrol yang menggunakan variabel frekuensi.

    Ÿ Input power : three-phase, five Ÿ wire AC 380V±10% 50Hz/60Hz Ÿ Output power : AC 380V safety Ÿ teral output Capacity : < 1KVA Ÿ Part list:

    Ÿ Control panel, workbench, frequency converter component, relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

 


  • Ÿ  Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo

  • Ÿ  ACPower:SinglephaseAC220V±10%50Hz

  • Ÿ  Airpressure:0.4MPato0.6MPa

  • Ÿ  DriveType:AC220V,approx.400Wservomotor

  • Ÿ  Partlist:

  • Ÿ  PLCmodule,theoperationbuttonmodule,theservo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment 

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831module.


Small Car Motion Training Equipment

 


  1. Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol gerakan mobil dengan koneksi sinyal sensor. Ÿ Input power : three phase
    Ÿ AC 380V ± 10% 50Hz/60Hz
    Ÿ Capacity : < 500VA
    Ÿ Part list:
    Ÿ Integrated sensor, ball screw, belt, proximity switches, limit switches, switch quantity control, position control, time sequence logical control and position control of DC motor.
    Ÿ User Manual.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831


Liquid Mix Training Set

 


  1. Ÿ Digunakan sebagai perangkat untuk pelatihan kontrol otomatis pada proses pencampuran cairan menggunakan pemrograman PLC.
    Ÿ Input power : DC 24V

    Ÿ Capacity : < 500VA 

    Ÿ Part list:

    Ÿ Mixing device
    Ÿ Material storage

    Ÿ Stirring motor
    Ÿ Stirring impeller
    Ÿ Solenoid valve
    Ÿ PLC I/O interface on the control panel.

     Ÿ User Manual.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Rabu, 28 Februari 2024

Belt-Drive Training Equipment

 


  • Ÿ  Digunakan sebagai perangkat untuk pelatihan pengendalian PLC, Sensor dan Motor.

  • Ÿ  Inputpower:24VDC

  • Ÿ  Partlist:

  • Ÿ  A variety of sensor applications, the assembly and

    disassembly of mechanical parts and electrical parts, system fault diagnosis and maintenance, pneumatic circuit adapter tube and electrical connections, the design and application of sorting transmission, find mistakes and correct electrical circuit, PLC basic instruction practice, Electric circuit connection, Instruction program writing.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hidrostatic Trainer


 

Ÿ Trainertekananudara

 Ÿ Input:0-250inch

Ÿ Output:4-20mA

Ÿ Supply:220VAC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Basic Electro Hydraulic Training System

 


  • Ÿ  Digunakan sebagai perangkat untuk pelatihan elektro hidrolik dasar.

  • Ÿ  Hydraulic power unit:

  • Ÿ  Work power : AC 380V

  • Ÿ  Frequency : 50Hz

  • Ÿ  Safety rate-limiting range : 1000- 1500 r/

  • Ÿ  Flow : approx. 4.5L/

  • Ÿ  Oil box volume : approx. 35Ltr

  • Ÿ  Gear pump system: motor pump using open shelf installation,

    structure compact, low noise, easy to maintenance.

  • Ÿ  Part list:

  • Ÿ  Training table, Hydraulic station, Double acting hydraulic cylinder, throttle valve, One-way throttle valve, Pressure relief valve (directly actuated), 4/3 Way solenoid valve (M) ,4/3 Way solenoid valve (O), 4/3 Way solenoid valve (Y), 4/3 Way solenoid valve (H), 4/2 Way solenoid valve, 4/2 Way manual shuttle valves, Speed regulator valve , Pilot Relief Valve, Pressure relief valve (pilot actuated), Pilot pressure reducing valve, Hydraulic control one-way valve, One-way valve, Pressure relay, T connector, Five way connector, hydraulic distributor, Glycerin pressure gauge, Hose 0.6m, Hose 1m, Hose 1.5m, DC power module, Relay module, Button switch module, power unit for hydraulic pump, Photoelectric sensor, Capacitive sensor, Inductive sensor, Micro switch module (left), Micro switch module (right), Test line, Toolkit, Hydraulic Simulation Software. Manual book, Experiments module

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

DC Motor Start Speed Control Training Equipment

 



  • Ÿ  Digunakansebagaiperangkatuntukpelatihansekaligusalat ukur pada pelatihan / percobaan pengaturan kecepatan motor listrik

  • Ÿ  Technicalparameter:

  • Ÿ  Inputvoltage:single-phase

  • Ÿ  threewire220V±10%50HZ

  • Ÿ  Theworkingenvironment:

  • Ÿ  temperaturerangeof-5~40

  • Ÿ  Installedcapacity:AC<1.5KVA

  • Ÿ  DC:excitationpower<0.5A

  • Ÿ  Armaturesupply<2A

  • Ÿ  Totalpowercontrol:withleakageprotection

  • Ÿ  Equipped with AC220V safe terminal and DC24V secure

    terminal extraction leads

  • Ÿ  Adjustablepower:

  • Ÿ  Armaturesupply:DC0-220V5A

  • Ÿ  ExcitationPower:DC220V2A

  • Ÿ  Partlist:

  • Ÿ  Control panel,workbench, frequency converter component,

    relay contacts training module, digital analog input and output given instruction component, three-phase asynchronous motor, motor rails, speed mechanism and other components.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Robot Training System

 


  • Ÿ  Digunakan sebagai perangkat untuk pelatihan tentang robot.

  • Ÿ  TechnicalParameter

  • Ÿ  Inputpower:single-phase

  • Ÿ  threewireAC220V±10%50Hz/60Hz

  • Ÿ  Capacity:<200VA

  • Ÿ  Circuit:DC24V

  • Ÿ  Workenvironment:-10~40

  • Ÿ  OptionalComputer

  • Ÿ  Computertable

  • Ÿ  PLCmodule

  • Ÿ  PCsoftware

  • Ÿ  Aircompressor

  • Ÿ  Partlist:

  • Ÿ  Trainingplatformbase

  • Ÿ  PTPRobottrainingsystem

  • Ÿ  Experimentcable

  • Ÿ  Accessoriesandspareparts

  • Ÿ  Softwareandmaterial

  • Ÿ  Learningsoftware

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Optical Electromechanical Integration Training Equipment

 


  • Ÿ  mengenai sistim otomasi lengkap dengan berbagai macam aktuator dan sensor untuk pendeteksian berbagai macam bahan material

  • Ÿ  produksi.

  • Ÿ  AC power : Single-phase AC220V ±10% 50Hz/60Hz

  • Ÿ  Air compressor :

  • Ÿ  Single-phase AC 220V, approx. 0.37 KVA

  • Ÿ  Air flow : approx. 10L

  • Ÿ  Discharge pressure : 0.6~0.8MPa

  • Ÿ  Work pressure : approx. 0.6MPa

  • Ÿ  Part list :

  • Ÿ  Training platform, Material conveyor components, Belt

    conveyer components, Detection unit, Rotating robot parts, Upright walking robot, Terminal block, Warning Lights, Sampling and testing materials, Safety Plug, Air tube, Air Compressor, Safety test leads. Manual book, Experiment module

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Module Praktik Robot Industri

 


Digunakan untuk pelatihan lengan robot pada industri a. Robot : Scara Robots

i. Panjang Lengan : sekitar 400 mm
ii. Payload : Max 3 kg, rated 1 kg
iii. power requirements : AC 100-240 V
iv. Maksimum kecepatan operasi : sekitar 1000 mm/sec

b. PLC
c. Sistem Gripper

i. Gripper : Module gripper set

ii. Finger : Costum finger, material Aluminium /SUS 304 d. Booth : Booth dengan material Aluminium profile
e. Sistem pneumatic
f. Sistem elektrik:

i. Panel box "lokal” ii. Sensor
iii Accesories

g. Laptop dengan dilengkapi software asli i. Sistem operasi
ii software robot
iii software PLC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Modular Product System




Ÿ Digunakan untuk pembelajaran mengenai rangkaian sistim pengaturan dan komunikasi PLC peralatan otomasi industri secara riil dan lengkap
Ÿ Air service (1 pcs), Mini cylinder (1pcs),

Swing cylinder (1 pcs), Solenoid valve (3 pcs), Vacuum generator ( 1 pcs), Vacuum chuck (1 pcs), Fiber optic sensor ( 2 pcs), Magnetic switch ( 2 pcs), PLC unit (1 pcs),Ÿ Touch panel unit ( 1 pcs), Control panel (1 pcs), Station size (1 pcs);

Ÿ 2. Testing station :

Ÿ Biaxial cylinder PLC unit Control, Panel

Platform body (1 pcs), Workpiece detection device ( 1 pcs), Pusher cylinder device (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), Capacitive sensor (1 pcs), Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Detection sensor, PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);
3. Processing Station

Biaxial cylinder (1 pcs), Chute, Servo controller (1 pcs), Servo motor (1 pcs), Drilling cylinder lifting device(1 pcs), Drilling Motor (1 pcs), Pushing gas cylinder, Clamp cylinder (1 pcs), Detection, cylinder (1 pcs), Slider (1 pcs), Solenoid valve, Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Magnetic switch (5 pcs), PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

4. Handling station

Boom cylinder (1 pcs), Swing cylinders (1 pcs), Arm cylinder (1 pcs), Waste tank (1 pcs) , Vacuum generator (1 pcs), Vacuum chuck (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs);
5. Sorting and storage station Protruding cylinder (1 pcs), Gas finger (1 pcs), Servo controller (2 pcs), Servo motor (2 pcs),
Solenoid valve (2 pcs), Fiber optic sensor and amplifier (2 pcs), Magnetic switch (4 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs).
Ÿ Part list:

Ÿ 1. Distribution station :

Ÿ 1. Input Power: Single phase ~ 220V ± 10% 50Hz

Ÿ 2. Leakage protection: I 0.1S
n ≤ 30mA, t ≤

Ÿ 3. AC220V AC power

Ÿ 4. 24 V DC power output

Ÿ 5. Accident emergency stop button, power

indicator, power indication

Ÿ 6. Power off misuse power protection

Ÿ 7. Installed capacity: ≤ 5kVA

Ÿ 8. Operation compressed air: 5 ~ 6bar

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831




Hydraulic & Pneumatic System Integration Trainer

 


  • Ÿ  untuk mempelajari kombinasi pneumatik dan hidrolik industri yang dikontrol oleh PLC

  • Ÿ  Outputvoltage380V/220V,DC

  • Ÿ  voltage24V.Thesupplyvoltage:

  • Ÿ  three-phasefive-wireAC380V±

  • Ÿ  5%,50Hz;controlvoltage:DC24V/+12V;

  • Ÿ  Machinecapacity:≤1kVA;

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic 4 Trainer Controlled By PLC

 


  1. Ÿ Untuk mempelajari dasar dasar hidrolika industri yang sudah dikontrol oleh PLC
    Ÿ The supply voltage: three-phase
    Ÿ five-wire AC 380 V ± 5%, 50Hz;

    Ÿ control voltage: DC 24V / +12 V; Ÿ Machine capacity: ≤ 1 kVA;

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Trainer Controlled By PLC

 


  1. Ÿ Untuk mempelajari dasar dasar pneumatic industri yang sudah di kontrol oleh PLC
    Ÿ The supply voltage: three-phase five-wire AC 380 V ± 5%, 50Hz;

    Ÿ control voltage DC 24V / +12 V; Ÿ Machine capacity: ≤. 1 kVA;

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Electrical Control Trainer

 


  • Ÿ  Untuk mempelajari cara kerja motor listrik dan kinerjanya sebagai mesin utama di industri

  • Ÿ  1. Working power: three-phase five-wire AC 380V±10% 50Hz;

  • Ÿ  2.Overallpowerconsumption:≤.1.5KW;

  • Ÿ  3. Safety protections: grounded, lead protection,

    using insulated safety sockets

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

 


  1. Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo

    • Ÿ  AC Power: Single phase AC220V ± 10% 50Hz

    • Ÿ  Air pressure: 0.4 MPa to 0.6 MPa

    • Ÿ  Drive Type: AC 220V, approx. 400W servo motor

    • Ÿ  Part list:

    • Ÿ  PLC module, the operation button module, the servo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment module.

      Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Digital Circuit Training Kit

 


  • Ÿ  Digunakan sebagai perangkat untuk pelatihan tentang rangkaian digital.

  • Ÿ  Input power: single-phase, AC 220V±10% , 50Hz/60Hz

  • Ÿ  Output power : DC+5V

  • Ÿ  continuously adjustable, DC±12V

  • Ÿ  One set adjustable signal source, one set of fixed

    pulse.

  • Ÿ  Part list:

  • Ÿ  Digital experiment box, Power area, manual pulse source, signal generator, frequency meter unit, Resistance part, capacitance part, Integrated circuit, Logic level show, logic level output unit, Bread board area unit, Power line, Testing line. Manual book, Experiment module.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Transformer Maintenance & Test Training System

 


  • Ÿ  Digunakan untuk pembelajaran mengenai motor listrik dan transformator, antara lain :

  • Ÿ  melepas lilitan motor, menggulung ulang, merakit, analisa data, dan keterampilan

  • Ÿ  lain mengenai transformator 1PH, motor induksi 1PH, motor

  • Ÿ  induksi 3PH, dan sebagainya.

  • Ÿ  Input power: three-phase, 380V±10% 50Hz/60Hz

  • Ÿ  Output power : AC380V ± 10%

  • Ÿ  50Hz, AC220V ± 10% 50Hz

  • Ÿ  Security :

  • Ÿ  leakage protection (action current ≤ 30mA), overcurrent

    protection,

  • Ÿ  fuse protection.

  • Ÿ  Part list:

  • Ÿ  3PH AC adjustable power supply,

  • Ÿ  DC power supply,

  • Ÿ  DC measurement instrument, AC measurement instrument &

  • Ÿ  digital multi-function wattmeter,

  • Ÿ  Motor power supply and test

  • Ÿ  instrument,

  • Ÿ  Motor inserting tools,

  • Ÿ  Manual digital winding counter.

  • Ÿ  Manual book

  • Ÿ  Experiment module.

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

CNC Trainer

 


  • Ÿ  Digunakan untuk pengenalan dan pelatihan pemrograman CNC, pembuatan program CNC dan pengerjaan benda kerja menggunakan simulasi mesin bubut dan mesin frais CNC

  • Ÿ  CNC Trainer terdiri dari:

  • Ÿ  Panel Kontrol Unit (Mesin NC), Komputer Unit, dan

    Software, yang tertanam dalam satu kesatuan unit

    CNC Trainer.

  • Ÿ  Konfigurasi CNC Trainer :

  • Ÿ  Panel Kontrol Unit (Mesin NC)

  • Ÿ  Mesin NC.

  • Ÿ  Monitor : LCD 800 x 600; 7,5"

  • Ÿ  MDI Keyboard

  • Ÿ  Komputer Unit

  • Ÿ  Monitor : LCD 1024 x 768; 18",

  • Ÿ  Memory : 2GB

  • Ÿ  Harddisk : 320GB

  • Ÿ  Sistem operasi : OS yang

  • Ÿ  mendukung

  • Ÿ  Software simulasi :

  • Ÿ  - Sistem simulasi CNC-Bubut

  • Ÿ  - Sistem simulasi CNC-Milling

    Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831